[HTML][HTML] Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: A review
… Geier and Szalay [35] analysed the surface roughness characteristics of drilled wall surfaces
in CFRPs. In the scope of their research, they observed that the ratio of roughness depth to …
in CFRPs. In the scope of their research, they observed that the ratio of roughness depth to …
Anton 3: twenty microseconds of molecular dynamics simulation before lunch
…, KS Shim, N Siddique, J Spengler, T Szalay… - Proceedings of the …, 2021 - dl.acm.org
… The volume of a spherical shell of radius 𝑟 and thickness 𝑡 is 4𝜋 (𝑟 –(𝑟– 𝑡) )/3 , and
thus there are substantially fewer nearby interactions (𝑟 → 0) than there are farther-away …
thus there are substantially fewer nearby interactions (𝑟 → 0) than there are farther-away …
[HTML][HTML] Electrical pulse fabrication of graphene nanopores in electrolyte solution
Nanopores in graphene membranes can potentially offer unprecedented spatial resolution
for single molecule sensing, but their fabrication has thus far been difficult, poorly scalable, …
for single molecule sensing, but their fabrication has thus far been difficult, poorly scalable, …
Optimisation of process parameters for the orbital and conventional drilling of uni-directional carbon fibre-reinforced polymers (UD-CFRP)
The machining behaviour of carbon fibre-reinforced polymer (CFRP) is not a very extensively
researched topic. With respect to this material, it must be noted that it is difficult to find its …
researched topic. With respect to this material, it must be noted that it is difficult to find its …
Frequency and time-frequency analysis of cutting force and vibration signals for tool condition monitoring
… where s > 0 is the scaling factor, which is inversely proportional to the frequency, τ is the
time shifting factor, 〈x(t)| ψ(s,τ)〉 indicates the inner product or the projection of the signal x(t) …
time shifting factor, 〈x(t)| ψ(s,τ)〉 indicates the inner product or the projection of the signal x(t) …
Artificial neural network based tool condition monitoring in micro mechanical peck drilling using thrust force signals
… T) values in all training, validation and testing cases. The regression plots of these data
are overlapping to Y = T … (2):(2) y p = b T x = [ b 0 b 1 ⋯ b n ] [ 1 x 1 ⋮ x n ] where y p is the …
are overlapping to Y = T … (2):(2) y p = b T x = [ b 0 b 1 ⋯ b n ] [ 1 x 1 ⋮ x n ] where y p is the …
De novo sequencing and variant calling with nanopores using PoreSeq
T Szalay, JA Golovchenko - Nature biotechnology, 2015 - nature.com
The accuracy of sequencing single DNA molecules with nanopores is continually improving,
but de novo genome sequencing and assembly using only nanopore data remain …
but de novo genome sequencing and assembly using only nanopore data remain …
Analysis of thrust force and characteristics of uncut fibres at non-conventional oriented drilling of unidirectional carbon fibre-reinforced plastic (UD-CFRP) composite …
Carbon fibre-reinforced plastic (CFRP) is an often-used structural material in the high-tech
industries, like aerospace, wind turbine, sport, automobile, robotics and military. Due to both …
industries, like aerospace, wind turbine, sport, automobile, robotics and military. Due to both …
[HTML][HTML] Artificial intelligence-based hole quality prediction in micro-drilling using multiple sensors
… Patra, K.; Jha, AK; Szalay, T. Tool condition monitoring in micro-drilling using vibrations
signals and artificial neural network. In Proceedings of the 2017 International Conference on …
signals and artificial neural network. In Proceedings of the 2017 International Conference on …
Determination of minimum uncut chip thickness and size effects in micro-milling of P-20 die steel using surface quality and process signal parameters
Prior to a critical value of uncut chip thickness (UCT) or the so-called minimum uncut chip
thickness (MUCT), the micro milling process is affected by ploughing which causes …
thickness (MUCT), the micro milling process is affected by ploughing which causes …