Abstract
With the COVID-19 pandemic surpassing 12M confirmed cases and 550K deaths worldwide, defining the key components of the immune response to SARS-CoV-2 infection is critical. Of particular importance is the identification of immune correlates of infection that would support public health decision-making on treatment approaches, vaccination strategies, and convalescent plasma therapy. While ELISA-based assays to detect and quantitate antibodies to SARS-CoV-2 in patient samples have been developed, the detection of neutralizing antibodies typically requires more demanding cell-based viral assays. Here, we present and validate a safe and efficient protein-based assay for the detection of serum and plasma antibodies that block the interaction of the SARS-CoV-2 spike (S) protein receptor binding domain (RBD) with its receptor, angiotensin converting-enzyme 2 (ACE2). This test is performed on the same platform and in parallel with an enzyme-linked immunosorbent assay (ELISA) for the detection of antibodies against the RBD and serves as a surrogate neutralization assay.
Main text
SARS-CoV-2 enters the host cell through the interaction of the viral spike (S) protein receptor binding domain (RBD) and the host cell receptor, angiotensin-converting enzyme 2 (ACE2)1 (Fig. 1a), and antibodies that block this interaction have neutralizing potential. The detection and study of neutralizing antibody activity following natural infection (or vaccination) can support research aimed at the development of novel therapeutics and vaccine candidates. It can also aid in the identification of acceptable donors for convalescent plasma therapy2, and more generally to establish immune correlates of infection.
For SARS-CoV-2, viral neutralization assays are performed using either live virus3 or viral vectors pseudotyped with the spike protein4. However, these cell culture-based assays are challenging to implement and time-consuming to run, factors that limit scalability. The conventional plaque reduction neutralization test (PRNT) that uses live SARS-CoV-2 virus is further complicated by the need for containment level 3 (CL-3) and a specialized laboratory set-up. Although the pseudotyped viral-vector-based assays do not require BSL-3 containment4, they are nevertheless complicated multistep procedures5.
By contrast, the detection and quantitation of polyclonal (neutralizing and non-neutralizing) antigen-specific antibodies in patient samples can be easily assayed by enzyme-linked immunosorbent assays (ELISA6). An ELISA is performed by immobilizing recombinantly produced viral antigen (such as the spike trimer or RBD; Supplementary Fig. 1, 2; see Methods) onto multi-well plastic plates that are then incubated with diluted patient serum or plasma samples. The detection of antibodies that bind to the antigen involves a second incubation with enzyme-conjugated anti-human antibodies, where the enzyme is often horseradish peroxidase (HRP). This enables the detection of a color change when an HRP substrate such as 3,3’,5,5’-tetramethylbenzidine (TMB) is used. In direct binding assays of this type (Fig. 1b), the presence of patient antibodies against the viral antigen leads to a dose-dependent increase in the signal observed.
Here, we describe a modified ELISA-type assay that replaces the HRP-coupled anti-human antibody used in the direct binding assay with recombinantly-expressed soluble biotinylated ACE2. Streptavidin-poly HRP detection is then used to detect the association of ACE2-biotin to the immobilized RBD or spike trimer (Fig. 1b - competition assay). In this competition assay, the presence of patient antibodies that can block the binding of soluble ACE2 to the immobilized RBD leads to a dose-dependent decrease in the signal observed. In our hands, the configuration described is more sensitive than that of the reverse where immobilized ACE2 is detected by biotinylated RBD as in 7 (Supplementary Fig. 3). Moreover, with the RBD immobilized, the same overall protocol and colorimetric detection can be used for both the direct binding and competition ELISA assays thereby facilitating a direct comparison.
Although the competition assay worked well with either the RBD or the spike ectodomain trimer immobilized (Fig 1c; Supplementary 4a), we focused on the RBD as it is easier to produce and provides a simple one-to-one binding interaction with ACE2. Using a small test set (Supplementary Fig. 4b), we first showed that the serum/plasma from positive, but not negative control patients, inhibited the interaction between ACE2 and the immobilized RBD (Fig. 1d). The technical reproducibility of the assay was within 5–10% CV. The total time required to perform the assay (once the plates are coated with the antigen) is 3.5–4 hours and the assay can be performed using the same equipment and biosafety protocols as a standard ELISA.
Using both the competition and direct binding (with a dilution series) ELISA assays, we then profiled a set of 58 serum samples acquired at the Canadian Blood Services as part of a screen for convalescent plasma therapy donors (Fig. 2a; Supplementary Fig. 5–7; Supplementary Table 1). With reference to the direct binding results, the competition ELISA showed that samples with high levels of IgG against the RBD were typically the most potent at blocking the RBD-ACE2 interaction (e.g. CBS13, which is included as a positive control). Conversely, samples lacking detectable RBD-binding antibodies were not able to block the interaction (Fig. 2b; Supplementary Fig. 8).
To more systematically evaluate the relationship between the RBD-binding antibody levels and the ability to block the RBD-ACE2 interaction (as determined by the competition ELISA), we calculated the area under the curve (AUC) for both assays and plotted the RBD-binding AUC versus the competition AUC (Fig. 2c; Supplementary Fig. 9). The plot showed a clear correlation (R2 = 0.823), with the sera containing the highest RBD-binding antibody levels being the most effective at blocking the RBD-ACE2 interaction (Fig. 2c; also compare Fig. 2b to 2a; Supplementary Table 1). Nevertheless, there are samples with similar RBD-binding antibody concentrations that differ significantly in their ability to block the RBD-ACE2 interaction (Fig. 2d; Supplementary Fig. 10). Among samples, differences in antibody affinities and their abundance, as well as the RBD epitopes bound, are all factors that could explain these outliers.
While it is reasonable to expect that antibodies that block the RBD-ACE2 interaction would be neutralizing, we validated this using cell-based viral infectivity and entry assays. Fifty-seven of the 58 samples analyzed by the competition ELISA were analyzed by PRNT, the gold standard in the field. PRNT50 is defined as the concentration of patient serum/plasma capable of reducing the formation of viral plaques by 50% (PRNT90 is the concentration that reduces plaque formation by 90%). As shown in Fig. 2e, most of the samples displaying high values in the direct binding and competition ELISA assays were also positive by PRNT90 (and those with low titers were negatives). Both ELISA assays also gave an overall agreement with the PRNT50 titers and the titers obtained with the spike-pseudotyped lentiviral-based entry assay4 (also see Supplementary Fig. 11-12). Taken together, these results indicate that our competition ELISA is a good surrogate neutralization assay, particularly for distinguishing between samples with high versus low neutralization activity. As such, the assay should be of value in the selection of candidate donors for convalescent plasma therapy and for monitoring immune correlates of patient outcomes. Future work will focus on providing a better understanding of the outliers observed in the both competition and neutralization assays. Indeed, rare but potent neutralizing antibodies in patient samples with low pseudovirus neutralization titers have recently been reported8.
To assess whether our competition ELISA might also be of value for screening the neutralization potential of monoclonal antibodies, we tested it using a number of neutralizing and non-neutralizing monoclonal antibodies and compared the results with that obtained in the cytopathic effect-reduction neutralization or lentiviral-based entry assay. As expected, the llama VHH72 monoclonal antibody previously shown to neutralize SARS-CoV-2 entry9 (expressed here as an human Fc fusion construct) and the Active Motif 414-1 antibody first isolated in a convalescent patient and demonstrated to be neutralizing10 both exhibited strong competition activity and neutralized the entry of spike pseudotyped lentivirus (Fig. 2f; Supplementary Fig. 13-14). A negative control IgG had no effect. In contrast, other antibodies such as an IgG derived from the monoclonal anti-SARS1 CR3022 or a commercial antibody from Genscript had a much more moderate effect, both in the competition assay (Supplementary Fig. 15) and either the cytopathic effect-reduction neutralization or lentiviral assays (Supplementary Fig. 14, 16). Notably, the Active Motif 414-2 antibody that bound efficiently to the RBD but that did not block the RBD-ACE2 interaction effectively and only partially prevent entry in the lentivirus entry assay (this antibody was previously shown to be incapable of neutralizing live SARS-CoV-2 virus4, 10). Taken together, these observations suggest that our competition assay is a good complement to more complex cell-based assays for the discovery/screening of neutralizing monoclonal antibodies.
In summary, we have developed a simple and safe competition ELISA that serves as a surrogate neutralization assay. It can be readily incorporated into existing testing platforms and may be of particular value in the selection of donors for convalescent plasma therapy and as a means of monitoring the immune response to vaccination. Given that neutralizing antibody titres have recently been shown to wane rapidly, the assay may also be useful for broad serosurveillance11. When coupled with epidemiological studies, it might also be used to assess the risk of infection/re-infection. Finally, we note that the optimized conditions used here for the direct RBD-binding ELISA are very similar to those reported by the Krammer lab using RBD-expression constructs that have been widely distributed. Their RBD can be obtained from BEI resources6, and we found that it generates similar results when used with our biotinylated ACE2 in the competition assay (Supplementary Fig. 17). This should further facilitate the broad implementation of our assay across multiple laboratories.
Author contributions
KTA and ACG designed the protein competition assay and the direct RBD antibody assay ZL and JMR designed the protein expression, biotinylation and purification procedures RS and PST optimized the lentiviral pseudotyping assay
EJM, HW, MAD, AD, RG, KAM, PB and MO developed, performed and analyzed the PRNT and/or cytopathic effect-reduction neutralization assays
KTA and BR performed direct ELISA experiments
YD designed the VHH72hFc1X7 construct, expression and purification procedures
KC helped coordinate the project
SD provided samples, coordinated neutralization testing and integrated PRNT and protein competition data KTA and ACG analyzed the protein competition data
JLG, AJM, SM, MO and SD contributed essential patient samples
KTA, JMR and ACG wrote the manuscript with input from all authors
Conflict of interest statement
Steven J Drews has acted as a content expert for respiratory viruses for Johnson & Johnson (Janssen). Work in the Gingras lab was partially funded by a contribution from QuestCap through the Sinai Health Foundation. The other authors declare no relevant conflicts of interest.
Methods
Serum and plasma samples
Canadian Blood Services Donors
Specimens-only serum donations were collected from individuals who were classified as having one or more of the following criteria: 1) self-declared evidence of a SARS-CoV-2-positive nucleic acid test, 2) a declaration of having been a close contact of a COVID-19 case, 3) a travel history and clinical presentation compatible with COVID-19, and 4) signs and symptoms compatible with COVID-19. Collections occurred two weeks or more after cessation of clinical symptoms. Serum specimens were processed as per routine laboratory processes and frozen at −80°C until shipment on dry ice to the testing laboratory.
Other samples for assay development
Negative control serum samples from patients enrolled in cancer or birth cohort studies prior to COVID-19 (prior to November 2019; REB studies #01-0138-U and #01-0347-U, Mount Sinai Hospital) and archived frozen in the LTRI Biobank were retrieved, thawed, aliquoted and transferred on ice to the research lab for viral inactivation. Alternatively, samples from previous studies of the immune system or systemic lupus acquired prior to November 2019 (REB studies #31593 University of Toronto, #05-0869, University Health Network) were transferred to the lab on dry ice. Positive controls for assay development were either convalescent plasma or serum from COVID-19 patients (confirmed by PCR; in- and out-patients) acquired in south-central Ontario in 2020 (REB studies #20-044 Unity Health Network, #02-0118-U/05-0016-C, Mount Sinai Hospital). Aliquots of these samples were transferred to the lab on dry ice. Only those samples with high levels of RBD-binding antibodies in single-point ELISA assays were considered positives for the development of the competition ELISA. Samples with low levels of RBD-binding antibodies were reclassified as “negative”.
For all ELISAs, inactivation of potential infectious viruses in plasma or serum was performed by incubation with Triton X-100 to a final concentration of 1% for 1 h prior to use12. For the pseudotyped lentiviral assays, the serum was heat-inactivated for 1 hr at 56° C6. See the different versions of the PRNT assays for details of the inactivation procedures, as applicable.
Expression system for protein purification
The expression plasmid generated is a derivative of those previously reported in our piggyBac transposonbased mammalian cell expression system13. Two versions of the plasmid were constructed; one contains the CMV promoter (PB-CMV) and the other the TRE promoter (PB-TRE). The vectors are otherwise identical and can be used to generate stable cell lines for constitutive or inducible protein expression. The protein cloning region contains several optional elements separated by restriction sites as follows: an N-terminal human cystatin-S secretion signal, the protein of interest, a foldon trimerization motif14, a 6xHis purification tag and an AviTag biotinylation motif15 (Supplementary Fig. 1). A woodchuck hepatitis virus posttranscriptional regulatory element (WPRE) follows the ORF to facilitate nuclear export of the mRNA. A pair of piggyBac transposon terminal repeats flank the expression cassette and an attenuated puromycin resistance marker, thereby allowing for the generation of stable cell lines using the piggyBac transposase.
Expression constructs for protein purification
The human codon optimized cDNA of the SARS-CoV-2 spike protein was purchased from Genscript (MC_0101081). The human ACE2 cDNA was derived from MGC clone 47598. To stabilize the soluble spike ectodomain trimer, two regions of the spike protein were mutated. Residues 682–685 (RRAR) were mutated to SSAS to remove the furin cleavage site, and residues 986–x987 (KV) were each mutated to a proline residue to stabilize the pre-fusion form as previously described16. The soluble spike protein ectodomain construct includes residues 1-1211 (MFVF...QYIK), followed by the foldon trimerization motif, a 6xHis tag and an AviTag. Both the SARS-CoV-2 receptor binding domain (RBD) and the human ACE2 constructs are preceded by the human cystatin-S secretion signal and followed by the 6xHis and AviTag. The RBD and ACE2 constructs contain residues 328-528 (RFPN...CGPK) and 19-615 (STIE...PYAD), respectively.
The cDNA of the human CR3022 Fab fragment was synthesized by Genscript based on its previously reported sequence17. The light chain and heavy chains were individually cloned into the PB-TRE expression plasmid. For Fab production, a 6xHis tag was added to the C-terminal end of the Fab heavy chain. An IgG form was generated by fusing the human IgG1 Fc coding sequence to the C-terminal end of the Fab heavy chain.
Large scale transient transfection
FreeStyle 293-F suspension cells were grown in shaker flasks (125 rpm) in Freestyle 293 expression medium (ThermoFisher) in a humidified 37 °C incubator filled with 3% (v/v) CO2. The cell density and viability were monitored by manual counting using a hemocytometer and trypan blue staining. For transfection, cells of >90% viability were counted and seeded at a density of approximately 106 cells/mL into 300 mL Freestyle 293 medium supplemented with 1 μg/mL Aprotinin. 300 μg of the PB-CMV plasmid DNA and 400 μL 293fectin (ThermoFisher) were each added to separate tubes containing 15 mL of Opti-MEM medium (ThermoFisher). The two solutions were then mixed and incubated for 5 min before being added to the 300 mL cell culture. Two days after transfection, the 300 mL culture was expanded into three 1L shaker flasks each containing 300 mL of culture medium. Protein expression was continued for an additional four days.
Stable cell line generation
FreeStyle 293-F cells or a GnT1-knockout FreeStyle 293-F cell line were used for generating stable cell lines. Approximately 106 cells were added to each well of a 6-well plate in 2 mL FreeStyle 293 medium. 2 μg of the PB-TRE plasmid encoding the protein of interest, 0.5 μg of the PB-rtTA-neomycin helper plasmid13 and 0.5 μg of the PBase expression plasmid, pCyL4318, were co-transfected in each well using lipofectamine 2000 (Thermofisher) following the manufacturer’s instructions. Three days post-transfection, the cells were transferred to 10-cm dishes containing FreeStyle 293 medium supplemented with 10% FBS, 2 μg/mL puromycin and 200 μg/mL G418. Selection was continued for approximately 2 weeks.
The stable cells were scaled up in 1L shaker flasks containing 300 mL FreeStyle 293 medium without supplements. When the cell densities reached approximately 106 cells/mL, 1 μg/mL doxycyline and 1 μg/mL Aprotinin were added to initiate protein expression. During the expression phase, 150 mL of the medium was removed, and fresh medium added, every other day.
Protein purification
The harvested expression medium was centrifuged at 10,000g to remove the cells and debris. For the 6xHis tagged proteins, the clarified media were passed through an Ni-NTA column. For the spike ectodomain, 3 mL of Ni-NTA resin was used for each liter of medium. For the RBD, ACE2 and CR3022 Fab, 8 mL of Ni-NTA resin was used for each liter of medium. The Ni-NTA resin was washed with 20 column volumes of phosphate buffered saline (PBS), followed by 3–5 column volumes of PBS containing 10 mM imidazole. The protein was eluted with PBS containing 300 mM imidazole and 0.1% (v/v) protease inhibitor cocktail (Sigma, P-8849). For the CR3022 antibody, the harvested medium was incubated with rProtein A Sepharose FF resin (GE healthcare). The resin was then washed with 20 column volumes of PBS and the antibody was eluted with 50 mM glycine, pH 3.0, containing 150 mM NaCl. The acid-eluted antibody was immediately neutralized by the addition of 1/20 volume of 1 M Tris, pH 8.5. Protease inhibitor cocktail was also added to a final concentration of 0.1% (v/v). The approximate purified yields of the various proteins are as follows: RBD, 70 mg/L; spike trimer, 3 mg/L; ACE2, 50 mg/L; CR3022 Fab, 80 mg/L and CR3022 IgG, 20 mg/L.
The protein samples were stored in 40% glycerol at −12 °C. Shortly before use, the glycerol stocks were further purified using size-exclusion chromatography. For the RBD, ACE2 and CR3022 Fab/IgG, a Superdex 200 Increase (GE healthcare) column was used. For the spike ectodomain, a Superose 6 Increase (GE healthcare) column was used (Supplementary Fig. 2).
Site-specific biotinylation of the AVI-tag containing proteins
Each biotinylation reaction contained 200 μM biotin, 500 μM ATP, 500 μM MgCl2, 30 μg/mL BirA, 0.1% (v/v) protease inhibitor cocktail and no more than 100 μM of the protein-AviTag substrate. The mixture was incubated at 30 °C for 2 hr followed by size-exclusion chromatography to remove unreacted biotin. For the RBD, the degree of biotinylation was assessed using a band-shift assay. 5 μg of the biotinylated RBD was heated to 95 °C for 30 s in SDS-PAGE loading buffer (containing 2% SDS, 50 mM DTT) and then after cooling, 1 μL of a 5 mg/mL streptavidin solution was added. The mixture was then analyzed by SDS-PAGE to assess the formation of the RBD-streptavidin complex (Supplementary Fig. 2).
Production of the VHH72 recombinant antibody
The llama single domain antibody VHH72 sequence (PDB entry 6WAQ_1) was obtained from Wrapp et al. 9. A cDNA encoding VHH72 fused to an ADCC-attenuated human IgG1 Fc domain (hFc1X7, from patent US 2019 352 383A1) was codon-optimized for expression in Cricetulus griseus (CHO cells), synthesized by Genscript and cloned into the pTT5™ plasmid 19. The pTT5-VHH72hFc1X7 plasmid was transiently expressed in CHO55E1 cells 20 using PEI-Max transfection reagent (Polysciences, Warrington, PA) and a slightly modified protocol as described previously 21. The cell culture was harvested at day 7 post-transfection, centrifuged 20 min at 3000g and filter-sterilized using a 0.22 μm membrane vacuum filter (Express PLUS, Millipore). Filtered supernatant was loaded on a 5 ml MabSelect SuRe column (GE Healthcare) equilibrated in PBS. The column was washed with PBS and the antibody eluted with 100 mM citrate buffer pH 3.6. The fractions containing the antibody were pooled and elution buffer was exchanged for PBS using NAP-25 columns (GE Healthcare). Purified VHH72hFc1X7 in PBS was quantified by absorbance at 280 nm using a Nanodrop spectrophotometer (Thermo Fisher Scientific) and the calculated extinction coefficient of the protein. Overall volumetric yield post-protein-A purification was 275 mg/L. The purified protein was analyzed by analytical size-exclusion ultra-high performance liquid chromatography coupled to a MALS detector and eluted as a major (>98% integrated area) symmetrical peak of 102 kDa with less than 2% aggregates (not shown).
Sources of other commercial proteins and recombinant antibodies
An alternative source for RBD was BEI Resources NR-52306 (contributors F Krammer, F Amanat, S Strohmeier; lot #7034437). Commercial antibodies tested also included a human IgG chimeric antibody from Genscript (SARS-CoV-2 spike S1 Antibody (HC2001), Genscript #A02038) and two SARS-CoV-2 spike Antibodies from Active Motif (AM002414, #91349; AM001414, #91361).
Direct ELISA assay for the identification of antibodies to the RBD
For the single point ELISAs concentrations and incubation times were optimized to maximize the separation between anti-RBD levels in convalescent plasma or serum from that of pre-COVID era banked serum while maintaining the required levels of antigens as low as possible. One microliter of serum or plasma was used for the detection of antibodies on 96-well plates coated with 75 ng/well of recombinant purified RBD. Single point ELISAs are expressed as ratios to a positive control convalescent plasma sample. For the multipoint ELISAs, the RBD amount was fixed to 100 ng/well to match the design of the competition ELISAs, and two-fold serial dilutions of the serum or plasma sample from 1 μl to 0.06 μl were employed.
In both cases the RBD antigen (diluted to 2 μg/ml in PBS) was first adsorbed to 96-well clear Immulon 4 HBX (Thermo Scientific, #3855) plates in PBS overnight at 4 °C, then washed three times with 200 μl PBS+ 0.1% Tween-20 (PBS-T; Sigma). Plates were blocked for 1 hr at room temperature with 200 μl 5% Blocker™ BLOTTO (Thermo Scientific, #37530) and washed three times with 200 μl PBS-T. In the single point ELISAs, plate blocking was performed with 3% w/v milk powder (BioShop Canada Inc., #ALB005.250, lot #9H61718) in PBS for 1–2 hr.
Patient samples (pre-treated with 1% final Triton X-100 for viral inactivation) diluted in PBS-T containing 1% w/v milk powder (1:50 for the single point ELISA) were then added to the plates and incubated for 2 hr at room temperature (50 μl total volume): technical duplicates were performed unless otherwise indicated. A chimeric human anti-spike antibody (SARS-CoV-2 spike S1 Antibody (HC2001), Genscript #A02038) was added to a set of wells on each plate as a serial dilution (1:5,000 to 1:80,000 or 10 ng to 0.63 ng per well in four steps) to enable cross-plate comparisons. Positive (convalescent plasma from a single patient) and negative controls (pre-COVID era banked serum) were also added to each plate, at 1 μl.
Wells were washed three times with 200 μl PBS-T. Goat anti-human anti-IgG (Goat anti-human IgG Fcy -HRP, Jackson Immunoresearch, #109-035-098) at a 1:60,000 dilution (0.67 ng/well) in 1% BLOTTO was added and incubated for 1 hr. Wells were washed three times with 200 μl PBS-T, and 50 μl of 1-Step™Ultra TMB-ELISA Substrate Solution (ThermoFisher, #34029) was added for 15 min at room temperature and the reaction was quenched with 50 μL stop solution containing 0.16N sulfuric acid (ThermoFisher, #N600). The plates were read in a spectrophotometer (BioTek Instruments Inc., Cytation 3) at 450 nm. For all ELISA-based assays, raw OD values had blank values subtracted prior to analysis. For the single-point direct binding assay, the average CV across CBS samples is 3.3% (mean) and 1.8% (median) (Supplementary Table 1). For single point assays, all data were normalized to the positive serum control (single point) on each plate and expressed as a ratio to this control. For the multi-point dose responses, blank-adjusted reads were used.
Variations to this protocol included
Replacement of the RBD on the plate by the BEI Resources #NR-52306. The assay was set up identically to and in parallel with our in-house produced RBD (Supplementary Fig. 17).
Replacement of RBD (100 ng) on plate by the spike trimer purified above (667 ng) (Supplementary Fig. 3).
Competition ELISA assay for the identification of neutralizing antibodies
Our final optimized competition ELISA assay uses 100 ng immobilized recombinant RBD on 96-well Immulon HBX plates incubated overnight at 4 °C (2 μg/ml). All volumes added to the well were 50 μl, unless specified otherwise. Plates are washed three times with 200 μl PBS-T and blocked for 1-1.5 hr at room temperature with 200 μl 3% BSA (BioShop Canada Inc. #SKI400.1, lot #9H61850). After washing as above, a four-step, two-fold serial dilution series of patient serum or plasma (0.5–4 μl of sample) was incubated for 1 hr. The wells were washed as above, and incubated with 50 ng biotinylated recombinant ACE2 for 1 hr. After washing as above, the wells were incubated with 44 ng Streptavidin-Peroxidase Polymer (Sigma, #S2438). The resultant signal was developed and quantified with TMB in an identical manner to the direct ELISA assays. Due to day-to-day variation in signal, all OD450 values are normalized to the OD450 of the well where no patient serum/antibody was added for each sample. All values are expressed in this ratio space.
Variations of this protocol included using a different source of RBD (BEI Resources NR-52306) and using spike trimer as shown above (670ng/well) (Fig. 1c and Supplementary Fig. 17). Another variation of the assay was to bind non-biotinylated ACE2 to the plate (100 ng) and to use biotinylated RBD (50 ng) for detection (Supplementary Fig. 3).
Neutralization assays
Neutralization assays on the Canadian Blood Services samples used in Fig. 2 were performed by two independent laboratories, the National Microbiology Laboratory of the Public Health Agency of Canada (NML), and the Wadsworth Center, New York State Department of Health (Wadsworth). The cytopathic effectreduction neutralization assay on the recombinant Genscript antibody was performed in Toronto.
For the PRNT assay at NML, SARS-CoV-2 (Canada/ON_ON-VIDO-01-2/2020, EPI_ISL_42517) stocks were titrated3 for use in a plaque reduction neutralization test (PRNT) adapted from a previously described method for SARS-CoV-122. Briefly, serological specimens were diluted 2-fold from 1:20 to 1:640 in DMEM supplemented with 2% FBS and incubated with 50 PFU of SARS-CoV-2 at 37 °C and 5% CO2 for 1 hr. The sera-virus mixtures were added to 12-well plates containing Vero E6 cells at 100% confluency, followed by incubation at 37 °C and 5% CO2 for 1 hr. After adsorption, a liquid overlay comprised of 1.5% carboxymethylcellulose diluted in MEM, supplemented with 4% FBS, L-glutamine, non-essential amino acids, and sodium bicarbonate, was added to each well and the plates were incubated at 37 °C and 5% CO2 for 72 hr. The liquid overlay was removed and the cells were fixed with 10% neutral-buffered formalin for 1 hr at room temperature. The monolayers were stained with 0.5% crystal violet for 10 min and washed with 20% ethanol. Plaques were enumerated and compared to controls. The highest serum dilution resulting in 50% and 90% reduction in plaques compared with controls were defined as the PRNT50 and PRNT90 endpoint titers, respectively. PRNT50 titers ≥1:160 and PRNT90 titers ≥1:20 were considered positive.
For the PRNT assay at Wadsworth, the assay for the detection of SARS-CoV-2 neutralizing antibodies was a modified version of previously described methods23–25. Patient sera and SARS-CoV-2 (USA/WA-1/2020, BEI Resources, #NR-52281) were diluted in Vero E6 cell culture maintenance medium (Eagle’s Minimal Essential Medium, 2% heat-inactivated fetal bovine serum, 200 U/ml Penicillin G, 200 U/ml Streptomycin). Patient samples were serially diluted 1:10 to 1:320 and mixed with an equal volume of virus containing 150 plaque forming units. Virus and serum mixtures were incubated at 37 °C and 5% CO2 for 1 hr. Following the initial incubation, 0.1 mL of each dilution was plated in a single well of a 6 well plate containing confluent monolayers of Vero E6 cells (ATCC, CRL-1586) and allowed to adsorb for 1 hr at 37 °C and 5% CO2. Following adsorption, cell cultures were overlaid with 0.6% agar in cell culture medium and returned to the incubator. At two days postinfection, a second overlay containing 0.2% neutral red was added. Monolayers were inspected for two days and plaques were counted. Antibody titers were reported as the inverse of the serum dilution resulting in 50% (PRNT50) and 90% (PRNT90) reduction in plaques as compared to the virus inoculum control.
For the cytopathic effect-reduction neutralization assay in Toronto, 200 μL of 0.2×106 VeroE6 cells/mL were seeded into a 96-well flat bottom plate to adhere overnight. All plasma and serum samples were heat inactivated at 56 °C for 30 min. In a separate 96-well plate, the serum, plasma or antibody (1 μg/ml) samples were serially diluted 2-fold eight times in serum-free DMEM starting from a dilution of 1:20 to 1:2560 in a volume of 25 μL. To all wells, 25 μL of SARS-CoV-2 SB2 Clone 1 was added ensuring that each well had a dose of 100 TCID. For the cell control, 50 μL of serum free DMEM was added. For the virus control, 25 μL of SARS-CoV-2 SB2 Clone 1 was added with a dose of 100 TCID, and topped off with 25 μL of serum free DMEM. The plate was incubated for 1 hr at 37 °C, 5% CO2 with shaking every 15 min. After incubation, all the media from the VeroE6 culture was removed, and the full 50 μL of serum/SARS-CoV-2 co-culture was layered on the cells. The plate was again incubated for 1 hr at 37 °C, 5 % CO2, with shaking every 15 min. After the incubation, the inoculum was removed and 200 μL of DMEM containing 2 % FBS was added. The plate was incubated for 5 days and cytopathic effect (CPE) was tracked.
Lentiviral spike pseudotyping assay
The assay was established using constructs previously described4 (constructs obtained through a kind gift from Jesse Bloom, Fred Hutchison Cancer Research Centre and now available through BEI Resources), and optimized in-house. Major changes to the reported protocol included: 1) Use of a 2nd generation psPAX2 (Addgene, #12260) lentivirus packaging system instead of the 3rd generation system used by the Bloom lab, 2) Production of spike pseudotyped virus-like particles (VLPs) at 33°C, 3) A neutralization assay plate layout that increases throughput, 4) Adjustments to the luciferase protocol to minimize variability in readings and, 5) Use of a cell line that co-expresses ACE2 and TMPRSS2. To generate this cell line, entry vectors for ACE2 and TMPRSS2 coding sequences were cloned into pLenti CMV Puro DEST (Addgene, #17452) and pLenti CMV Hygro DEST (Addgene, #17454) respectively. The resulting transfer vectors were used to generate lentivirus via the 2nd generation psPAX2 and VSV-G (Addgene, #8454). HEK293T cells were transduced with ACE2 lentivirus at an MOI <1 and selected with puromycin (1 μg/mL) to generate a stable population. These cells were subsequently transduced with TMPRSS2 lentivirus and selected with hygromycin (200 μg/mL) in a similar fashion.
For VLP generation, HEK293T cells were transiently co-transfected in a 6-well plate format containing 2 ml growth medium (10% FBS, 1% Pen/Strep in DMEM) with 1.3 μg psPAX2, 1.3 μg Luc2-IRES-ZsGreen (BEI, #NR-52516; a kind gift from Jesse Bloom) and 0.4 μg SPIKE(fixK) (BEI, #NR-52514; a kind gift from Jesse Bloom) using 8 μl JetPrime in 500 μl JetPrime buffer. After 8 hr of transfection, the medium was replaced by 3 mL of DMEM containing 5% heat-inactivated FBS, 1% Pen/Strep and the cells incubated for 16 hr at 37 °C and 5% CO2 and then transferred to 33 °C and 5% CO2 for an additional 24 hr. At 48 hr post transfection, the supernatant was collected, spun at 500g for 5 min, filtered through a 0.45 μm filter and frozen at −80 °C. The virus titers were evaluated using HEK293T-ACE2/TMPRSS2 cells at 10K cells per well on a Poly-L-Lysine [5-10 μg/mL] coated 96-well plate using HI10 media (10% heat-inactivated FBS, 1% Pen/Strep) and a virus dilution resulting in >1000 relative luciferase units (RLU) over control (~1:100 virus stock dilution).
For the neutralization assay, 2.5-fold serial dilutions of the serum samples were incubated with diluted virus at a 1:1 ratio for 1 hr at 37 °C before being transferred to plated HEK293-ACE2/TMPRSS2 cells and incubated for an additional 48 hr at 37 °C and 5% CO2. After 48 hr, cells were lysed and Bright-Glo luciferase reagent (Promega, #E2620) was added for 2 min before reading with a Perkin-Elmer Envision instrument.
Data analysis and figure generation
Area Under the Curve (AUC) values were tabulated for both the direct binding ELISA and the competition ELISA using R version 4.0.1 and R package pracma. For the competition ELISA, the ratios (normalized values) are used in the AUC calculations. To identify outliers, we calculated the distance of each point from the regression line using total least squares and labelled points with distances > 0.4.
For the lentiviral pseudotyping assays, 50% inhibitory concentration or dilution (IC50 or ID50) were calculated with non-linear regression [log(inhibitor) vs. normalized response - Variable slope] using GraphPad Prism 8 (GraphPad Software Inc., San Diego, CA, USA).
The assay reproducibility was estimated across experiments by comparing the AUC values for those samples profiled across different batches.
CBS13 (n=3) CV for displacement was 5.1% and direct binding was 5.5%;
CBS16 (n=3) CV for displacement was 3.4% and 11.5% for binding; CBS50 (n=2) CV for displacement was 9.9% and binding was 0.7%
Ethics
All samples were collected after Research Ethics Board (REB) review. The ELISA assays were performed at the Lunenfeld-Tanenbaum Research Institutes with Mount Sinai Hospital (MSH) Research Ethics Board (REB) approval (study number: 20-0078-E). External samples were transferred through Material Transfer Agreements. All research has been performed in accordance with relevant guidelines and regulations. All participants have provided informed content. The samples were de-identified prior to transfer to the assay laboratory.
Supplementary Figures and legends
Supplementary tables
Supplementary Table 1
Acknowledgements
We thank Janet McManus at Canadian Blood Services for her technical and logistical expertise and the Wadsworth Center Media and Tissue Culture Core. We thank Joan Wither for the lupus patient samples, and Jesse Bloom and Katharine Crawford for sharing protocols and reagents for the lentiviral S pseudotyping assay. The following reagent was produced by Florian Krammer’s group under HHSN272201400008C and obtained through BEI Resources, NIAID, NIH: Spike Glycoprotein Receptor Binding Domain (RBD) from SARS-Related Coronavirus 2, Wuhan-Hu-1, Recombinant from HEK293 Cells, NR-52306. We thank Matthew Stuible and Alex Pelletier (NRC) for VHH72hFc1X7 expression and purification and Joe Schrag (NRC) for SEC-UPLC/MALS analysis. Funding for the development of the assays in the Gingras lab was provided through generous donations from the Royal Bank of Canada (RBC), Questcap and the Krembil Foundation to the Sinai Health System Foundation. We also acknowledge an “Ontario Together” team grant from the Government of Ontario to JG, JMR, ACG, MO, AM to develop serology and saliva assays. The equipment used is housed in the Network Biology Collaborative Centre at the Lunenfeld-Tanenbaum Research Institute, a facility supported by Canada Foundation for Innovation funding, by the Ontarian Government and by Genome Canada and Ontario Genomics (OGI-139). We also acknowledge funding support from New York State Department of Health (to KAM).
JMR is supported by the Canadian Institutes of Health Research (FRN 162305)
ACG is supported by the Canadian Institutes of Health Research (CIHR FDN 143301) and a Canada Research Chair, Tier 1, in Functional Proteomics.