Abstract
Human thymidylate synthase (hTS) is essential for DNA replication and therefore a therapeutic target for cancer. Effective targeting requires knowledge of the mechanism(s) of regulation of this 72 kDa homodimeric enzyme. Here, we investigate the mechanism of binding cooperativity of the nucleotide substrate. We have employed exquisitely sensitive methyl-based CPMG and CEST NMR experiments enabling us to identify residues undergoing bifurcated linear 3-state exchange, including concerted switching between active and inactive conformations in the apo enzyme. The inactive state is populated to only ∼1.3%, indicating that conformational selection contributes negligibly to the cooperativity. Instead, methyl rotation axis order parameters, determined by 2H transverse relaxation rates, suggest that rigidification of the enzyme upon substrate binding is responsible for the entropically-driven cooperativity. Lack of the rigidification in product binding and substrate binding to an N-terminally truncated enzyme, both non-cooperative, support this idea. In addition, the lack of this rigidification in the N-terminal truncation indicates that interactions between the flexible N-terminus and the rest of the protein, which are perturbed by substrate binding, play a significant role in the cooperativity—a novel mechanism of dynamic allostery. Together, these findings yield a rare depth of insight into the substrate binding cooperativity of an essential enzyme.
Introduction
Thymidylate synthases (TS) are enzymes which convert deoxyuridine monophosphate (dUMP) and methylenetetrahydrofolate (mTHF) into deoxythymidine monophosphate (TMP) and dihydrofolate (DHF), making them part of the only de novo pathway for production of the nucleotide thymidine. Disruption of this pathway causes cells to die a “thymineless death”. Consequently, human TS (hTS) is a therapeutic target for cancer. Effective targeting requires detailed knowledge of the mechanism of regulation of this 72 kDa homodimeric enzyme, which is currently lacking. TSs from several species, including human, are reported to display half-the-sites activity, meaning that only one of the two subunits can perform catalysis at a time (Anderson, O’Neil, DeLano, & Stroud, 1999; E. F. Johnson, Hinz, Atreya, Maley, & Anderson, 2002; Maley, Pedersen-Lane, & Changchien, 1995). In addition, we have shown previously that the two subunits of hTS bind the nucleotide substrate dUMP with positive cooperativity (Bonin et al., 2019). These properties clearly demonstrate that intersubunit communication plays a major role in the regulation of the activity of hTS, but the physical mechanism(s) underlying this communication are not understood. Here, we focus on the mechanism of substrate binding cooperativity.
A potential clue regarding the mechanism of intersubunit communication lies in the presence of crystal structures of apo hTS in two distinct conformations of the catalytically essential active site loop (Chen, Jansson, Sim, Larsson, & Nordlund, 2017). It has been suggested that the apo enzyme exchanges between these so-called “active” and “inactive” conformations (Phan et al., 2001), and that this conformational equilibrium may drive the binding cooperativity via coupling to nucleotide binding (Bonin et al., 2019). This would necessitate that the inactive conformation be predominant in the apo form, which has been reported on the basis of fluorescence measurements (Phan et al., 2001). Further, the inactive conformation has been reported to be responsible for the interaction between hTS and its mRNA, which plays a role in regulation of the translation of hTS (Brunn, Dibrov, Kao, Ghassemian, & Hermann, 2014) and is central to the mechanism of resistance to hTS-targeted chemotherapy (Tai et al., 2004). This putative conformational equilibrium is thus of interest for the regulation of hTS at multiple levels.
Another possible mechanism of communication centers around changes in the conformational entropy of the enzyme in response to substrate binding (i.e. a change in the dynamics of hTS as opposed to a change in the structure, termed “dynamic allostery” (Cooper & Dryden, 1984)). Such a mechanism has been reported in other systems (Capdevila, Braymer, Edmonds, Wu, & Giedroc, 2017; Petit, Zhang, Sapienza, Fuentes, & Lee, 2009; Popovych, Sun, Ebright, & Kalodimos, 2006; Saavedra, Wrabl, Anderson, Li, & Hilser, 2018), and would be consistent with our calorimetric measurements on hTS showing that the binding cooperativity is entropically driven (Bonin et al., 2019). Recent work from Wand and Sharp demonstrates that order parameters determined from nuclear magnetic resonance (NMR) relaxation measurements can be used to obtain reasonable quantifications of conformational entropy changes (Caro et al., 2017). As a result, it is now possible to compare NMR derived order parameter changes to changes in binding entropies determined calorimetrically, enabling us to assess the contribution of dynamic allostery to intersubunit communication observed in hTS. It is also possible that both of these mechanisms contribute to the substrate binding cooperativity.
In this work, we present an extensive characterization of the structure and dynamics of hTS in apo and dUMP bound forms using methyl-based NMR spectroscopy. A combined analysis of Carr-Purcell-Meiboom-Gill (CPMG) relaxation dispersion and chemical exchange saturation transfer (CEST) data show that apo hTS indeed undergoes a concerted exchange process, with some probes exchanging between three states, that is suppressed upon dUMP binding. There are also faster, localized motions involving exchange with “exposed states” which are still present in the dUMP bound form. We find, however, that apo hTS primarily adopts the active conformation, rather than the inactive as had been previously reported. As a result, the coupling of this exchange process to dUMP binding contributes negligibly to the binding cooperativity. Methyl rotation axis order parameters calculated from 2H transverse relaxation rates in apo and dUMP bound forms of hTS show an overall rigidification of the enzyme upon substrate binding corresponding to a change in conformational entropy, −TΔSconf, of about 10 kcal/mol, enough to explain the roughly 5 kcal/mol difference between the two binding entropies if most of this rigidification occurs upon the first binding event. In addition, we find that hTS binding to the product TMP, as well as an N-terminal truncation of hTS binding to dUMP, lack both binding cooperativity and rigidification, further establishing the correlation between hTS dynamics and binding thermodynamics. This suggests that differences in the change in conformational entropy of the enzyme upon each of the two substrate binding events are responsible for the observed cooperativity. Finally, by creating a thermodynamic cycle using the changes in conformational entropy for full length and N-terminal truncated hTS binding dUMP, we demonstrate that the intrinsically disordered 25 residue N-terminus makes a key contribution to the change in conformational entropy upon dUMP binding to the full length enzyme via interactions with the protein surface, a novel mechanism of dynamic allostery.
Materials & Methods
Sample preparation
Samples of hTS were expressed and purified as described previously (Bonin & Lee, 2021), with modifications made for the specific methyl labeling utilized here. Briefly, a pET21a vector including hTS with an N-terminal 6x histidine tag was transformed into BL21 (DE3) cells lacking the rne131 gene (Invitrogen, Carlsbad, CA). After an adaptation period (Bonin & Lee, 2021), the cells were grown in M9 media made with D2O (99.8%, Sigma-Aldrich, St. Louis, MO/Cambridge Isotope Laboratories, Inc., Tewksbury, MA), 1 g/L 15NH4Cl (Sigma-Aldrich, St. Louis, MO/Cambridge Isotope Laboratories, Inc., Tewksbury, MA) and 2 g/L U-[2H] glucose (Sigma-Aldrich, St. Louis, MO/Cambridge Isotope Laboratories, Inc., Tewksbury, MA). Cells were grown up to an OD600 of 0.65 at 37 °C, at which time one of two Ile and Leu/Val precursors was added: 60 mg/L 2-ketobutyric acid-4-13C,3,3-d2 sodium salt hydrate (Ile) and 100 mg/L 2-keto-3-(methyl-d3)-butyric acid-4-13C, 3-d sodium salt (Leu/Val) for {I (13CδH3), L(13CδH3,12CδD3), V(13CγH3,12CγD3)} U-[2H,15N] hTS (referred to hereafter as ILV CH3 hTS) or 60 mg/L alpha-ketobutyric acid-4-13C,3,3,4,4-d4 sodium salt (Ile) and 100 mg/L alpha-ketoisovaleric acid-3-methyl-13C,3-methyl-d2,3,4,4,4-d4 sodium salt (Leu/Val) for {I (13CδHD2), L(13CδHD2,12CδD3), V(13CγHD2,12CγD3)} U-[2H,15N] hTS (referred to hereafter as ILV CHD2 hTS). One hour after the addition of the precursors, IPTG was added to 1 mM, and protein was expressed at 20 °C for 12 hours. For samples without the ILV labeling (U-[2H,15N] hTS, referred to hereafter as 15N hTS), IPTG is simply added at an OD600 of 1.0.
The purification workflow was as described previously (Bonin & Lee, 2021). Notably, cleavage of the 6x histidine tag leaves an extra glycine and alanine at the N-terminus. Protein was concentrated to ∼0.2 mM (dimer) for NMR study, as determined by 280 nm absorbance using (Bonin et al., 2019). The final conditions for NMR study were 27.5 mM Na2HPO4, 20 mM NaCl, 0.02% NaN3, 5 mM DTT, pH 7.5 (NMR buffer) with D2O added to 5%, and a temperature of 25 °C. For samples in D2O, the NMR buffer was prepared in 99.8% D2O and pD (uncorrected) was 7.1 (Covington, 1968). The sample was exchanged into the D2O buffer using a NAP-5 Sephadex G-25 column (GE Healthcare, Chicago, IL). For dUMP and TMP (Sigma-Aldrich, St. Louis, MO) bound samples, nucleotide was added to a ratio of ∼10:1 nucleotide:dimer as determined by 260 nm absorbance using or .
Evaluation of apo hTS ground state structure using RDCs
A 0.2 mM sample of apo 15N hTS in NMR buffer (5% D2O) was prepared as described. Residual dipolar couplings (RDCs) of backbone amides were determined using the ARTSY method (Fitzkee & Bax, 2010). First, a measurement of the isotropic coupling (J coupling) was made, after which Pf1 phage (ASLA Biotech, Riga, Latvia) was added to 7 mg/mL, resulting in a 4.7 Hz splitting of the D2O line. A second coupling measurement was made in this aligned condition (J + RDC), and the RDC was calculated by taking the difference between aligned and isotropic couplings. dUMP was then added to the aligned sample to 2.5 mM, and the aligned coupling measurement was repeated. RDCs for dUMP bound hTS were computed using the J couplings from apo hTS. The error in signal intensities was taken to be 1.5x base plane noise based on the duplicate point RMSD observed in pseudo-3D datasets. These measurements were made on a Bruker Avance III HD 850 MHz spectrometer with a TCI H-C/N-D 5mm cryoprobe. Additional details regarding acquisition parameters for these and all other NMR experiments can be found in the Supplementary Information (Supplementary Table 5). Unless otherwise stated, all NMR data were processed using NMRPipe (Delaglio et al., 1995) and signal intensities were obtained using NMRViewJ (B. A. Johnson & Blevins, 1994).
RDC data were analyzed using the DC web server. The alignment tensor was fit (order matrix method) using the observed RDCs and a structure of hTS (5X5A: active, 1YPV: inactive, 5X5D: dUMP bound), with the calculated RDCs being computed from the alignment tensor and the structure. Residues from the flexible N and C termini (1-29, 301-313) were excluded from this analysis, as were residues 108-129, which lack electron density in the inactive structure.
Characterization of µs-ms motions using CPMG and CEST
For MQ CPMG (Korzhnev, Kloiber, Kanelis, Tugarinov, & Kay, 2004) experiments, a 0.2 mM sample of LV CH3 apo hTS in NMR buffer (99.8% D2O) was prepared as described. Datasets were collected at 850 and 600 MHz. dUMP was added to 2.2 mM and datasets were recollected. For 13C SQ CPMG (Lundstrom, Vallurupalli, Religa, Dahlquist, & Kay, 2007) experiments, a 0.3 mM sample of ILV CH3 apo hTS in NMR buffer (99.8% D2O) was prepared as described. Datasets were collected at 850 MHz with 13C carrier frequencies at 24 ppm (Leu/Val) and 14 ppm (Ile). dUMP was added to 2.8 mM and datasets were recollected. For 13C CEST (Rennella, Huang, Velyvis, & Kay, 2015) experiments, a 0.3 mM sample of ILV CHD2 apo hTS in NMR buffer (99.8% D2O) was prepared as described. Datasets were collected at 600 MHz using spin lock powers of 41 and 25 Hz as determined by calibration via nutation experiment. 500 Hz 2H decoupling was applied during the relaxation period.
For CPMG datasets, R2,eff values were calculated from peak intensities (source code 1) using the following equation: where Trelax is the relaxation time and plane i is the ith plane with 180° pulses applied at frequency ccpmg(i). The error in signal intensity was taken to be the duplicate point RMSD for the CPMG datasets and 1.5x base plane noise for the CEST datasets. The three sets of R2,eff values (MQ 850 MHz, MQ 600 MHz, and 13C SQ 850 MHz), along with two sets of normalized intensities from the CEST experiments (41 and 25 Hz spin lock) were globally analyzed for each probe (for dUMP bound hTS, the analysis includes only the CPMG data). Fits were carried out to either a bifurcated 3-state model (B↔A↔C, source code 2-9) or a 2-state model (source code 8, 10) depending on the probe, where the R2,eff and normalized intensity values are calculated from the exchange parameters using the Bloch-McConnell equations (see Supplementary Information for relevant matrices). For a detailed consideration of alternative 3-state models, see the Supplementary Information. For the 3-state model fits, individual rates were fit as opposed to exchange rates and populations (kab, kba, kac, kca). The reason for this is that when there is 3-state exchange where only one of the two processes is concerted, only the rates (and not the populations) are identical amongst the probes involved in the concerted process. For probes involved in the concerted process, kab, kba, and Δωc,ab were fixed as values obtained from a global 2-state fit of the CEST data alone (source code 11-13), as 3(2)-state fits of the CPMG and CEST data without any fixed parameters were found to give the same answer. The one exception to this is I237, whose Δωc,b was found to change noticeably in a 3-state fit of the CPMG and CEST data where no parameters were fixed. 1H Δω’s were fixed at 0 ppm unless a nonzero value was required to obtain a reasonable fit to the data (Korzhnev et al., 2004). Geminal methyls of the same residue were fit globally. The errors in fit parameter values are taken as the standard deviation of the values obtained in fits of 200 Monte Carlo simulations of the data.
Assessing exposure of fast motion probes using solvent PREs
A 0.1 mM sample of LV CH3 apo Δ25 hTS in NMR buffer (99.8% D2O) was prepared as described. HMQC spectra were recorded with 0 and 2 mM gadodiamide (APExBIO, Houston, TX). These spectra were collected on an 850 MHz spectrometer. The intensity ratio is defined as: The error in signal intensity was taken to be 1.5x base plane noise. Residue depths were calculated from the 5X5A structure using EDTSurf (Xu, Li, & Zhang, 2013).
Characterization of ps-ns motions using 2H relaxation
A 0.2 mM sample of ILV CHD2 apo hTS in NMR buffer (5% D2O) was prepared as described. All 2H R2 relaxation (Tugarinov, Ollerenshaw, & Kay, 2005) data were collected on a 600 MHz spectrometer. In the absence of duplicate points (Supplementary Table 5), the error in peak intensity was estimated as 1.5x the base plane noise. dUMP was added to 2 mM to the apo sample, and 2H relaxation data were collected as for apo. For the product bound state, a 0.2 mM sample of ILV CHD2 hTS-TMP in NMR buffer (5% D2O, 2mM TMP) was prepared as described. 2H relaxation data were collected as for apo and dUMP bound forms. For the truncated enzyme, a 0.2 mM sample of ILV CHD2 apo Δ25 hTS in NMR buffer (99.8% D2O) was prepared as described. After collection of the data on the apo enzyme, dUMP was added to 1.7 mM and the data were recollected.
Peak intensities were normalized relative to the first point (Trelax = 0 ms) and fit to a monoexponential decay to obtain the relaxation rate, R2,2H. The errors in transverse relaxation rates were taken as the standard deviation of the values obtained in fits of 200 Monte Carlo simulations of the data. The 2H relaxation rate, along with the rotational correlation time, τc, of the molecule (see below), was then used to calculate the methyl rotation axis order parameter, , using the following equation: where is the quadrupolar coupling constant with a value of 167 kHz (Tugarinov et al., 2005).
Changes in conformational entropy were calculated from changes in the methyl symmetry axis order parameter using the following equation: where is the average change in order parameter, Nχ is the number of side-chain dihedral angles in the protein (1136 used here, calculated using residues 26-307), and is the slope of the entropy meter (Caro et al., 2017). Only probes with errors in were included in the analysis.
Structural similarity between full length and Δ25 hTS shown by HMQC spectra
Samples of 0.1 mM ILV CH3 apo hTS and 0.2 mM LV CH3 Δ25 apo hTS in NMR buffer (99.8% D2O) were prepared as described. HMQC (Tugarinov, Hwang, Ollerenshaw, & Kay, 2003) spectra were collected on an 850 MHz spectrometer.
Determination of rotational correlation time
Rotational correlation times for the various states of hTS were determined by 15N relaxation (Lakomek, Ying, & Bax, 2012) collected on samples of closely matched concentration. For the apo form, data were collected on separate samples at two fields, 600 MHz [500 MHz]. A 0.2 [0.2] mM sample of 15N apo hTS in NMR buffer (5% D2O) was prepared as described. T1, T1ρ, and heteronuclear NOE datasets were collected at both fields. All T1ρ datasets, unless otherwise stated, were collected with 1.5 kHz spin lock power as determined by nutation experiment. For the dUMP bound form, T1 and T1ρ datasets were collected at two fields, 600 MHz [500 MHz], and a single heteronuclear NOE dataset was collected at 600 MHz. A 0.25 [0.25] mM sample of 15N hTS-dUMP (2.5 mM dUMP) in NMR buffer (5% D2O) was prepared as described. For the TMP bound form, T1, T1ρ, and heteronuclear NOE datasets were collected at 600 MHz. A 0.2 mM sample of 15N hTS-TMP (2.8 mM TMP) in NMR buffer (5% D2O) was prepared as described. The T1ρ dataset was collected with 2 kHz spin lock power as determined by nutation experiment. For the apo form of Δ25 hTS, T1, T1ρ, and heteronuclear NOE datasets were collected at 600 MHz. A 0.2 mM sample of 15N apo Δ25 hTS in NMR buffer (5% D2O) was prepared as described. For the dUMP bound form of Δ25 hTS, T1 and T1ρ datasets were collected at 600 MHz. A 0.2 mM sample of 15N Δ25 hTS-dUMP (2 mM dUMP) in NMR buffer (5% D2O) was prepared as described.
Intensities from T1 datasets were normalized relative to the Trelax = 0 s point and fit to a monoexponential decay to obtain the longitudinal relaxation rate, R1. Intensities from T1ρ datasets were normalized relative to the Trelax = 0 s point and fit to a monoexponential decay to obtain R1ρ. Transverse relaxation rates, R2, were then calculated from R1ρ, R1, and tilt angle θ using the equation: The heteronuclear NOE was calculated as . Error in signal intensity was taken to be the mean residual of the best fit for T1 and T1ρ datasets, and 1x base plane noise for heteronuclear NOE datasets. The ROTDIF web server (Berlin, Longhini, Dayie, & Fushman, 2013) was used to fit τc values for these different states of hTS given the relaxation rates and the 5X5A (apo) or 5X5D (dUMP, TMP) structure. The criteria for inclusion of residues in this fit was as follows: R1 and R2 values were subject to log2 transformation to normalize their distributions, after which the mean and standard deviation of the normalized distributions were calculated (residues from flexible N- and C-termini were not included in these calculations). Residues with log2 R1 and/or log2 R2 values outside one standard deviation of the mean were excluded from the analysis. In addition, in cases where NOE data were present, any residue with an NOE < 0.65 were excluded from the analysis. In the case of apo Δ25 hTS, residues with NOE < 0.6, as well as residues identified by ROTDIF as possessing Rex, were excluded from the analysis. Notably, specific criteria for which residues to include, as well as the type of diffusion tensor used (isotropic, axially symmetric, fully anisotropic) had very little impact on the fit τc,eff. Fits to axially symmetric and fully anisotropic models showed only slight anisotropy to the diffusion tensor, justifying use of the isotropic model for analysis of the 2H relaxation data. Note that this rotational correlation time is determined in 5% D2O; for samples in 99.8% D2O, the correlation time is corrected based on the relative viscosities of D2O and H2O: where τc,D2O and τc,5% D2O are the rotational correlation times in 99.8% and 5% D2O, respectively, and 1.235 is the ratio of the viscosities of D2O and H2O at 25 °C (Baker, 1936). Rotational correlation times for all states can be found in the Supplementary Information (Supplementary Table 6).
Results
Apo hTS undergoes slower exchange between active and inactive conformations, in addition to faster localized processes on the µs-ms timescale
To understand the origin of binding cooperativity in hTS, we first needed to determine if a conformational selection or dynamic allostery mechanism is utilized. In other words, does dUMP binding elicit a change in the structure or the dynamics of hTS, or perhaps both. To begin to answer this question, we needed to establish whether apo hTS, which crystallizes in active and inactive conformations (Chen et al., 2017), switches between these two conformations in solution. NMR spectroscopy enables the investigation of protein dynamics on a wide range of timescales, including the µs-ms timescale where this type of conformational equilibrium is typically seen. For our characterization of the dynamics of hTS on the µs-ms timescale, we have employed CPMG relaxation dispersion and CEST experiments targeting the methyl groups on isoleucine, leucine, and valine side chains. These experiments probe somewhat overlapping regions of the µs-ms timescale, with CEST characterizing motions on the ms timescale and CPMG characterizing motions with exchange timescales of 100s of µs to 10s of ms. In the CEST experiment, a spin lock is applied at many frequencies scanning the entire spectrum, and the intensity of the observed (major state) signals are monitored to determine frequencies at which saturation is transferred from a minor state to the major state (Vallurupalli, Bouvignies, & Kay, 2012). In the CPMG experiment, dephasing of transverse magnetization due to stochastic exchange between states with distinct frequencies (i.e. the contribution of chemical exchange to transverse relaxation, Rex) is refocused using trains of 180° pulses applied at various rates. We have used multiple-quantum (MQ) (Korzhnev et al., 2004) and 13C single-quantum (SQ) (Lundstrom et al., 2007) CPMG experiments as well as a 13C CEST experiment using the CHD2 methyl isotopomer (Rennella et al., 2015). The MQ CPMG and CEST experiments are especially well suited to probing these motions in a large protein like hTS. Our analysis of the µs-ms dynamics of apo hTS include 850 and 600 MHz MQ CPMG datasets, an 850 MHz 13C SQ CPMG dataset, as well as 40 and 25 Hz spin lock power CEST datasets. For dUMP bound hTS, the analysis includes 850 and 600 MHz MQ CPMG datasets and an 850 MHz 13C SQ CPMG dataset.
Global analysis of the CPMG and CEST datasets (see Materials & Methods) on apo hTS show that 10 probes are involved in a concerted process with an exchange rate of 240 ± 7 s−1 and an excited state population of ∼1.3% (Figure 1, Supplementary Table 2, Supplementary Figure 4, source data 1-6). Interestingly, 8 of these 10 probes show 3-state exchange, also undergoing a faster process with variable exchange rate and population (Figure 2). A B↔A↔C model, in which each excited state exchanges with the ground state but not with each other, is most appropriate in these cases (Supplementary Information). These probes involved in the concerted process include L187 and L192 in the active site loop, as well as L198, which lies in the dimer interface on one end of the loop (Figure 1b). In addition, L101, L121, and L131, which lie in the “extended loop”, are also involved in this process. Of the remaining four probes, three – L74, V79, and L221 – are around the binding site of the cosubstrate mTHF. The active site and extended loops show significant differences at the backbone level between the active and inactive structures (Figure 1c), with most of the extended loop lacking electron density in the original inactive structure. The fact that these two loops are involved in this concerted process is consistent with this process being exchange between the active and inactive conformations. We have attempted to confirm this by obtaining the chemical shifts of the active and inactive conformations using mutants which stabilize these conformations, but unfortunately these mutants (R163K, M190K, A191K (L. M. Gibson, Lovelace, & Lebioda, 2008; L. M. Gibson, Lovelace, L., Berger, S., Lebioda, L., 2007; Luo et al., 2011)) either did not express solubly or yielded very poor NMR spectra.
In addition to the probes involved in the concerted process, there are also 11 probes showing 2-state behavior that have variable exchange rates and populations in apo hTS (Figure 2, Supplementary Table 2). There appears to be some consistency in exchange rates and populations between nearby probes for these faster motions; for example, L73 and V79 have well-defined exchange rates and minor state populations that are in excellent agreement, as do L41, L252, and L259 (Figure 2c, Supplementary Table 2). In cases where the minor state population for the faster motion is well-defined, it is almost always very small (0.11 − 0.24%). The three probes which clearly have a larger minor state population are V58 (1.1 ± 0.2%), I237 (4.3 ± 0.9%), and V285 (5% quantile of Monte Carlo simulations is 2%). Interestingly, these localized faster motions generally have 13C Δω’s that are roughly 3 times as large as those of the concerted, slower motion (Supplementary Table 2), suggesting considerable change in the local environment of these probes.
To gain further insights into these faster motions, we performed solvent paramagnetic relaxation enhancement (sPRE) experiments, measuring intensities of the methyl signals in 0 mM and 2 mM gadodiamide (source data 11). Gadodiamide is a paramagnetic cosolute, which increases the relaxation rates (decreases signal intensities) of the methyl signals in a manner dependent on the depth, or the distance to the surface, of the methyl probe in the structure. Interestingly, we find that many of the probes showing the faster motion are more exposed to the solvent than would be expected given their depth in the ground state structure (Figure 3). Notably, these data were collected on a truncation of hTS lacking the first 25 residues, termed “Δ25”, which lacks the slower concerted process but retains the faster localized motions (Supplementary Figure 2). This enables us to attribute the observed enhancement in solvent exposure to these localized, faster motions as opposed to the active-inactive equilibrium. In addition, we find that probes possessing this unexpectedly large solvent exposure that did not exhibit exchange in our CPMG and CEST global analysis are nearby probes exhibiting the faster motion. We conclude that the non-concerted, faster motion involves localized excursions to “exposed states”, particularly in regions of the protein surrounding the nucleotide and folate binding sites. Exceptions to this are L198, L279, and V285, which possess the faster motion but do not show enhanced solvent exposure. These probes are marked with asterisks in Figure 3. L279 and V285 lie on the opposite end of each protomer relative to the substrate binding site, while L198 resides at the dimer interface. We note that the lack of enhanced solvent exposure at probes on the dimer interface (Figure 3b), the lack of concertedness of the faster motion (Figure 2c), and the presence of the faster motion in the dUMP bound enzyme (see below) all indicate that this faster motion is not exchange between the dimer and monomeric forms of hTS. The observed enhancement in solvent exposure is consistent with the characteristic large 13C Δω’s of the faster motion.
Finally, there are also two probes showing 3-state exchange that do not appear to be involved in the exchange with the inactive conformation (V58 and L259, Supplementary Table 2). The parameters for the slower of the two processes for these probes also appear to be distinct from each other.
Global analysis of the CPMG datasets on dUMP-bound hTS (source data 7-10) reveal that the slower, concerted process is lost upon substrate binding, but faster motion is still present. Further, comparison of the 13C Δω’s between apo (fast motion) and dUMP-bound states show a significant correlation, strongly suggesting that similar configurations are being accessed (Figure 2d). Exchange rates for the faster motion in apo and dUMP-bound states are generally similar as well (Supplementary Tables 2 and 3). It is difficult to comment on whether these faster motions are suppressed or amplified upon dUMP binding due to the relatively large error in the populations in the dUMP-bound analysis, however the smaller number of analyzable probes in the case of dUMP-bound hTS suggests that these motions are at least somewhat suppressed upon substrate binding (Supplementary Table 3). The loss of the slower, concerted process in dUMP bound hTS is consistent with this process being exchange between the active and inactive conformations, as the inactive conformation binds dUMP with much lower affinity than the active conformation (Chen et al., 2017).
The active conformation is the ground state of apo hTS
The CPMG and CEST data show that apo hTS undergoes exchange between the active and inactive conformations, and that this exchange process is coupled to dUMP binding. Yet the question remains as to which of these conformations is the ground state (∼98.5%) and which is the excited state (∼1.3%). Only if the inactive conformation is the ground state can a conformational selection model contribute significantly to the binding cooperativity.
In order to determine which conformation is dominant in solution in apo hTS, we measured residual dipolar couplings (RDCs) on the backbone amides (source data 12-13). These RDCs contain information regarding the orientation of the amide bond vectors; thus, by comparing the experimentally observed RDCs with those calculated from the active and inactive structures using a fit alignment tensor (see Materials & Methods), it can be determined which of the two conformations, if either, is consistent with the data. As a comparison, we also measured RDCs on the backbone amides of dUMP-bound hTS (source data 14), where the ground state structure is known. The comparisons show that the active conformation is in significantly superior agreement with the apo hTS data than the inactive conformation (Figure 4). Further, we find that the agreement between the apo RDCs and the active structure is just as good as the agreement between dUMP-bound RDCs and the hTS-dUMP structure (also active), having essentially identical correlation coefficients (0.91 and 0.92, respectively). Together, these findings demonstrate that the active conformation is the ground state of apo hTS, indicating that the minor state of the concerted process observed in the CPMG and CEST data is the inactive conformation (1.3%). Consistent with this notion, we find that changes in 13C chemical shift upon dUMP binding correlate very poorly with, and are generally much smaller in magnitude than, the 13C Δω’s obtained for the concerted process (Supplementary Figure 5). The small population of the inactive conformation in the apo enzyme means that conformational selection contributes negligibly to the substrate binding cooperativity. Since the apo active and dUMP-bound structures are so similar (all atom RMSD = 0.84 Å between 5X5A and 5X5D structures), this indicates that there is no significant structural change to the enzyme upon dUMP binding. Consequently, the origin of the dUMP binding cooperativity is likely related to the dynamics of the enzyme.
Rigidification on the ps-ns timescale of hTS upon dUMP binding correlates with binding cooperativity
Given that we have excluded conformational selection as the source of dUMP binding cooperativity, ps-ns timescale dynamics were considered since these motions are known to impact binding energetics (Caro et al., 2017; Kasinath, Sharp, & Wand, 2013). The dynamics of hTS on this much faster timescale were investigated by measuring 2H transverse relaxation rates of CHD2 methyl isotopomers in isoleucine, leucine, and valine side chains (Tugarinov et al., 2005). From these relaxation rates, we calculate the methyl symmetry axis order parameter, , which takes on a value between 0 and 1. A value of 0 indicates maximal flexibility of the methyl group, while a value of 1 indicates maximal rigidity. These order parameters are related to the conformational entropy of the molecule; thus, changes in the order parameter upon substrate binding are related to the conformational entropy component of the binding entropy. Reasonable estimates of the change in conformational entropy can be made from these order parameter changes using the “entropy meter” (Caro et al., 2017).
We first measured the 2H transverse relaxation rates for apo and dUMP bound hTS (source data 15-16). The average change in order parameter (dUMP-apo) is 0.027 ± 0.006 (n = 47) (Figure 5, Supplementary Tables 7 and 8). Using the entropy meter (see Materials & Methods), this corresponds to a −TΔSconf of 10 ± 3 kcal/mol. The magnitude of this entropic change is about twice as large as the 4.9 ± 0.3 kcal/mol difference between the entropies of the two dUMP binding events (Bonin et al., 2019). This means that if most of the rigidification occurs upon the first binding event, this change in the ps-ns timescale dynamics could be the origin of the positive binding cooperativity.
Probes showing the most rigidification (largest increase in order parameter) are L85, L88, L89, L121, V158, L192, L198, and L221 (Figure 5c). Interestingly, much of this rigidification occurs around the binding site of the cosubstrate mTHF (L85, L88, L89, L221). Notably, our ps-ns dynamics analysis lacks probes in the dUMP binding site (Figure 5b). In addition, there appears to be considerable colocalization of probes which are rigidified on the µs-ms timescale (i.e. probes which lose the exchange with the inactive conformation) and probes which are rigidified on the ps-ns timescale (Figure 6). Of the 6 probes involved in the active-inactive switching that are present in the ps-ns dynamics analysis, 4 (L121, L192, L198, L221) show large changes in order parameter . The remaining 2 probes (L187, I237), while not displaying a large change themselves, are each in close proximity to a residue possessing a large change in order parameter (V158 and L233, respectively, magenta ovals in Figure 6). In addition, there are 3 probes which have a large change in order parameter that are not in the immediate vicinity of residues involved in the slow motion (L85, L88, and L89, magenta asterisks in Figure 6). However, 1H 2-plane CPMG data clearly show that V84, and to a lesser extent L85, is dynamic on the µs-ms timescale in apo hTS (Supplementary Figure 6). Further, the helix containing these residues (residues 80-93, referred to hereafter as the folate binding helix) connects probes involved in the concerted process, specifically L101 and V79. These observations suggest that L85, L88, and L89 may be involved in the slow motion as well. Finally, 8 of the 9 probes with a large change in order parameter (red/purple in Figure 6) showed an increase in order parameter upon dUMP binding (more rigid), the exception being L233.
To further establish the connection between the ps-ns timescale dynamics and the binding cooperativity, we have also investigated these dynamics in two very similar scenarios which lack binding cooperativity. The first is binding of the product TMP to hTS. TMP is very similar to the substrate dUMP, differing only by the addition of a methyl group on the nitrogenous base, yet we have found that hTS binds TMP non-cooperatively (Supplementary Information). Further, chemical shift perturbations (CSPs) between the TMP and dUMP-bound forms are generally of a similar (small) magnitude as the CSPs between the dUMP-bound and apo forms (Figure 7a,b), suggesting that there is also little structural change between hTS-TMP and hTS-dUMP (there is currently no crystal structure of hTS-TMP). Interestingly, many of the probes having the largest CSPs are clustered at the dimer interface, which is consistent with there being a difference in the intersubunit communication between the TMP and dUMP-bound forms. These probes include L198 and L212 on the beta sheet, as well as L187 from the active site loop and V158 from another loop.
The small CSPs between hTS-TMP and hTS-dUMP again point to dynamics as being the driving force behind the dUMP binding cooperativity. We have measured 2H relaxation rates for hTS-TMP as well (source data 17), and we find that the average change in order parameter between hTS-TMP and apo hTS is −0.006 ± 0.006 (n = 46) (Figure 5, Supplementary Tables 7 and 9). This corresponds to a −TΔSconf of −2 ± 2 kcal/mol, meaning that in this case there is actually a slight increase in flexibility of the molecule, as opposed to the rigidification observed with dUMP binding.
The second scenario we consider is dUMP binding to Δ25 hTS. As in the case of TMP binding, this truncated form of hTS binds dUMP non-cooperatively (Supplementary Figure 3), a fascinating result given that the N-terminus is absent in crystal structures of both apo and dUMP bound hTS. It is notable that the non-cooperative E. coli enzyme lacks this N-terminal extension, identifying it as a region of interest as a possible determinant of the cooperativity. Δ25 hTS is perhaps an even more striking example than hTS-TMP, as there are essentially no perturbations of the chemical shifts at all to the apo enzyme upon removal of the N-terminus (Figure 7c), suggesting that the structures are nearly identical. This suggests once again that differences in the dynamics of these molecules are behind the differences in binding cooperativity.
Consequently, we have measured 2H transverse relaxation rates for apo and dUMP-bound Δ25 hTS as well (source data 18-19). We find that for Δ25 hTS binding dUMP, the average change in order parameter is 0.009 ± 0.004 (n = 76) (Figure 5, Supplementary Tables 10 and 11), corresponding to a −TΔSconf of 3 ± 2 kcal/mol. While there is still a slight rigidification in this case, the magnitude of the entropic change is less than 1/3 that of dUMP binding to full length hTS. It is worth noting that our analysis of dUMP binding to full length hTS includes only a single residue from the N-terminus itself, V3, as the two N-terminal leucines (L8 and L13) are unassigned. This is to say that the observed differences between full length and Δ25 hTS stem from the N-terminus’ impact on the rest of the protein, rather than from the N-terminus itself. These results establish a correlation between the rigidification upon dUMP binding and cooperativity.
Interactions between N-terminus and protein surface make large contribution to dUMP rigidification
Since the rigidification on the ps-ns timescale upon dUMP binding is likely the source of dUMP binding cooperativity, we sought to determine the origins of this rigidification. An answer is found in considering a thermodynamic cycle consisting of dUMP binding to the full length and Δ25 enzymes (Figure 8a). We define two paths, A and B, which both begin and end with full length apo and full length dUMP-bound, respectively. Path A contains a single step, which is dUMP binding to the full length enzyme. Path B contains 3 steps: 1) removal of the N-terminus from the apo enzyme, 2) dUMP binding to the truncated enzyme, and 3) addition of the N-terminus to the truncated dUMP-bound enzyme. The changes in conformational entropy for each of these steps is calculated based on the order parameter values discussed previously. We find that the summed change in conformational entropy across each of these paths agree well with each other, as expected. We also find that the change in conformational entropy upon removal of the N-terminus from the apo enzyme (step 1 of path B) is larger in magnitude than the change in conformational entropy upon addition of the N-terminus to the truncated dUMP bound enzyme (step 3 of path B). This means that the N-terminus has a larger impact on the ps-ns timescale dynamics of the apo enzyme than the dUMP-bound enzyme, suggesting that there are interactions between the N-terminus and the protein surface in apo hTS that are coupled to dUMP binding. These interactions make the apo enzyme more flexible (step 1 of path B has a positive sign). Further, we find that the conformational entropy change associated with this coupling (step 1 + step 3 of path B or equivalently path A – step 2 of path B, 6 ± 3 kcal/mol when calculated using probes common to all states) is larger than the conformational entropy change of dUMP binding to the truncated enzyme (step 2 of path B, 3 ± 2 kcal/mol), making this coupling of the N-terminal interactions responsible for the majority of the conformational entropy change on path B. Together, these results identify the N-terminus of hTS as a key player in the rigidification of the enzyme on the ps-ns timescale upon dUMP binding, suggesting that interactions between the N-terminus and the protein surface, which are diminished/altered upon dUMP binding, contribute significantly to the overall change in conformational entropy. Ironically, it is this flexible N-terminus (which lacks electron density in all crystal structures of hTS) which enables greater rigidification upon dUMP binding.
To gain a deeper understanding of how the N-terminus affects the fast timescale dynamics of hTS, we turn our attention to the differences in order parameter changes between [apo Δ25 and apo full length hTS] and [dUMP-bound Δ25 and dUMP-bound full length hTS] (step 1 + step 3 of path B). The location of these differences in , or , are shown on the hTS structure in Figure 8b. We find that the probes with the largest are L121, V158, and L233. values for these probes are nearly identical to their values upon dUMP binding to full length hTS, indicating that the entirety of their ps-ns dynamic response to substrate binding is due to the N-terminus (i.e. the change in order parameter of these probes in step 2 of path B is close to 0). Interestingly, the values for these probes contain sizable contributions from both the apo and dUMP bound terms, highlighting that despite the larger magnitude of entropy change for step 1 compared to step 3 of path B, the N-terminus still has some effect on the dUMP bound state (i.e. the entropy change of step 3 of path B is nonzero). Additionally, we find that L192 and L221, which are significantly rigidified upon dUMP binding to full length hTS, have . This indicates that the entirety of the rigidification of these probes, which lie near the substrate binding site, is due to the direct interactions between dUMP and hTS.
Discussion
We have shown previously that hTS binds two molecules of dUMP with ∼9-fold entropically-driven positive cooperativity (Bonin et al., 2019). Here, we investigate the physical mechanism of this cooperativity. The two possible mechanisms are population selection (change in structure) and dynamic allostery (change in dynamics). We also entertain the possibility that there could be contributions from both mechanisms. Given that apo hTS has been crystallized in two distinct conformations, the active and inactive conformations, the population selection mechanism seemed likely. Indeed, this is the mechanism we had previously speculated was behind the binding cooperativity (Bonin et al., 2019); as discussed in that work, in order for a coupling of the active-inactive equilibrium to dUMP binding to be the source of the cooperativity, the minimum required population of the inactive population in apo hTS needs to be ∼89%. Here, we have shown that the ground state of apo hTS is the active conformation, with the inactive conformation being populated to only 1.3%. This is contrary to a previous report, which claimed that the inactive conformation is the ground state at our phosphate condition of 27.5 mM (Phan et al., 2001) on the basis of fluorescence measurements. This small population of the inactive conformation in the apo form indicates that the inactive state plays essentially no role in the substrate binding thermodynamics/activity of the enzyme, suggesting that perhaps its only role is to enable binding to the hTS mRNA (Brunn et al., 2014). Alternatively, the population of the inactive conformation may be increased by modification of hTS, such as the previously reported phosphorylation of the extended loop (Fraczyk et al., 2010).
Consequently, we have probed the dynamics of apo and dUMP bound hTS on both the µs-ms and ps-ns timescales using NMR spectroscopy in order to gain insight into the mechanism of dUMP binding cooperativity. On the µs-ms timescale, in addition to the exchange with the inactive conformation, we find that apo hTS undergoes faster, localized motion throughout much of the protein. Notably, it is the exquisite sensitivity of the MQ CPMG and CHD2 13C CEST experiments that have enabled the discrimination of 2- and 3-state exchange models as well as the identification of the concerted process. Interestingly, there appears to be considerable overlap between regions of the protein undergoing this faster motion and regions of the protein possessing greater solvent exposure than expected given their depth in the hTS active structure. Based on this, we propose that these non-concerted motions involve exchange with “exposed states”. As discussed previously, we know that the population of the inactive conformation is small enough that the loss of this motion contributes negligibly to the cooperativity. The faster motion likely makes little to no contribution to the cooperativity as well, given that it is present to similar extents in both apo and dUMP bound forms.
On the ps-ns timescale, we find that hTS is significantly rigidified upon binding both molecules of dUMP. This rigidification is especially striking given that our analysis lacks probes within the dUMP binding site. The only ILV side chain within 5 Å of dUMP is V223, which is absent from our analysis of the full length enzyme due to poor signal-to-noise. There are a number of ILV probes which lie just outside this range; these include L192 and L221, which are two of the most rigidified residues in our analysis. This suggests that the observed rigidification may even be underestimating the true magnitude of the effect due to the lack of probes within the dUMP binding site, which are likely also substantially rigidified.
In addition, we observe an apparent colocalization of regions displaying changes in dynamics on the µs-ms and on the ps-ns timescales. This phenomenon has been seen previously (Henzler-Wildman et al., 2007; McDonald, Whitley, Boyer, & Lee, 2013). In McDonald et al., it was reported that changes in ps-ns dynamics were seen largely within the active site and in the allosteric pathway of the protein CheY upon phosphorylation. This is consistent with our results, in which residues showing the largest changes in order parameter are near the dUMP binding site and/or in regions of the protein that are involved in the active-inactive switching. In CheY, McDonald et al. observed that while the active site showed an increase in rigidity, the allosteric pathway showed an increase in flexibility. This contrasts with our results on hTS showing a concomitant increase in rigidity in both areas. This increase in rigidity of regions in which the conformational exchange is suppressed is consistent with the previously proposed idea that faster timescale motion can play a role in enabling slower timescale, concerted motions (Henzler-Wildman et al., 2007). Indeed, most of the probes which are a part of the active-inactive switching are quite flexible on the ps-ns timescale in apo hTS, the one exception being L101 (Supplementary Figure 7). However, we also find that in hTS Δ25, which lacks the active-inactive exchange, there is little to no change in the order parameter of these residues (Supplementary Figure 7). This demonstrates that the presence of ps-ns motion on its own is not sufficient to produce slower timescale, concerted motions.
To assess the plausibility of this rigidification upon dUMP binding being the source of the cooperativity, we first used the “entropy meter” (Caro et al., 2017) to quantify a reasonable estimate of the change in conformational entropy associated with the order parameter changes we observed. Verifying that this is the case would require us to make these same measurements on a sample of hTS that is bound by only a single molecule of dUMP, which is a work in progress. Our group has recently developed an approach that has enabled us to make this kind of sample of a different dimeric system (Sapienza et al., 2021).
In the absence of measurements on the singly-bound state of hTS, we instead support the idea that the changes in ps-ns motions are the source of the binding cooperativity by comparing these changes to those of hTS binding TMP and Δ25 hTS binding dUMP, both of which are non-cooperative. We find that hTS-TMP and apo Δ25 hTS are very similar structurally to hTS-dUMP and apo full length hTS, respectively, suggesting that the differences in binding thermodynamics are largely due to differences in the dynamics of the enzyme. Indeed, both of these non-cooperative cases lack the pronounced rigidification observed with dUMP binding to full length hTS. In the case of the product TMP binding to hTS, we observe an entropic free energy change of −2 ± 2 kcal/mol, indicating that there is actually a slight increase in the flexibility of the enzyme. The difference in the response of the ps-ns dynamics to dUMP and TMP binding is especially striking considering that TMP differs from dUMP only in the addition of a methyl group on the nitrogenous base. Clearly, hTS has been designed to be exquisitely sensitive to the presence of the TMP methyl group in terms of its dynamics. In the absence of this methyl group (dUMP), the enzyme is rigidified, particularly in the folate binding helix. This helix contains F80, which makes direct hydrophobic contact with the cosubstrate mTHF. Consequently, we hypothesize that this rigidification may serve as a means to preorganize the mTHF binding site upon dUMP binding. Consistent with this idea, we observe rigidification of L221 as well, which also makes hydrophobic contact with mTHF. In the presence of this methyl group (TMP), there is a widespread, slight increase in the flexibility of the enzyme, especially relative to the dUMP bound form. In particular, the folate binding helix is noticeably more flexible in the TMP bound form than the dUMP bound form. The increase in conformational entropy of this region, and of the enzyme as a whole, in the TMP bound form may aid in the release of DHF (the folate product of the reaction) after the reaction has occurred. Also of note is V158, residing on the dimer interface, which has the largest difference in order parameter between the dUMP and TMP bound states.
In the case of the truncated enzyme, Δ25, binding dUMP, there is an overall rigidification of the enzyme, but the magnitude is significantly smaller than that observed in the full length enzyme. This difference in the response of the ps-ns dynamics of hTS to dUMP binding between full length and Δ25 indicates that the N-terminus is somehow involved in the rigidification. Little is known structurally about the N-terminus, given that it is absent in all crystal structures of hTS, though it has been shown to play a role in the enzymatic activity (Huang et al., 2010). Backbone amide probes from the N-terminus show only very subtle perturbations of chemical shift and transverse relaxation rate upon dUMP binding, suggesting that dUMP binding has little impact on the N-terminus itself (Supplementary Figure 8). Further, the very low transverse relaxation rates of the N-terminal residues indicate that this region is highly flexible (i.e., disordered) in both apo and dUMP bound states, consistent with the crystallography. While a disordered region has not been implicated in the previously described examples of dynamic allostery (Capdevila, Braymer, Edmonds, Wu, & Giedroc, 2017; Petit, Zhang, Sapienza, Fuentes, & Lee, 2009; Popovych, Sun, Ebright, & Kalodimos, 2006), an allosteric mechanism utilizing intrinsically disordered regions has been described previously (Hilser & Thompson, 2007). However, this mechanism involves the disordered region folding upon binding, which is not the case in hTS. The N-terminus’ contribution to the rigidification of hTS upon dUMP binding, presumably in the form of transient interactions between the N-terminus and the protein surface that are perturbed by substrate binding, thus represents a novel mechanism of dynamic allostery involving an unexpected role for a disordered region.
Our finding of the N-terminus’ considerable role in the ps-ns dynamics of the protein as a whole raises two major questions: 1) where does the N-terminus interact with the rest of the protein, and 2) why are these interactions coupled to dUMP binding? One possibility is that the N-terminus interacts with the dUMP binding site itself, which would easily explain why these interactions are coupled to the binding. Another possibility is that the N-terminus interacts in the vicinity of L121 and V158, the probes which contribute most to the coupling entropic free energy. Interestingly, in a crystal structure of the inactive conformation (PDB ID 1YPV), there is electron density ascribed to V3 that is within 10 Å of V158, consistent with this idea. Further, we observe a small change in the order parameter of V3 upon dUMP binding to full length hTS (Supplementary Tables 7 and 8). If this model is indeed correct, the question remains as to why these interactions are coupled to dUMP binding. Given that there is no significant structural change upon dUMP binding, the coupling is likely dynamic in nature. However, V158 (as well as L121) has essentially no change in order parameter upon dUMP binding in Δ25 hTS, indicating that there is no dynamic coupling on the ps-ns timescale between this probe and the active site unless the N-terminus is present. Further work is required to answer these questions definitively.
This work also highlights the prominent role of the 3 insertions in hTS, relative to the E. coli enzyme, in the dynamics of the protein. These insertions are the N-terminus, part of the extended loop (residues 115 – 126), and part of a second loop (residues 146 – 153). TS is a highly conserved enzyme, with the human and E. coli forms having 55% identity in amino acid sequence. Indeed, these insertions are the only major structural difference between the enzymes. Interestingly, the E. coli enzyme, like Δ25 hTS, lacks both dUMP binding cooperativity (Sapienza, Falk, & Lee, 2015) and the inactive conformation. We have found that the N-terminus and the extended loop are involved in the active-inactive switching; L101, L121, and L131 from the extended loop are part of this concerted process, and this motion is absent in the N-terminally truncated enzyme. In addition, the N-terminus plays a significant role in the rigidification of hTS on the ps-ns timescale upon dUMP binding. L121, from the extended loop, as well as V158, the only ILV probe from the second loop, are two of the most rigidified probes. Further, the rigidification of these probes upon dUMP binding only occurs when the N-terminus is present, indicating that the dynamics of these 3 regions are coupled. To somewhat oversimplify, it could be said that these 3 flexible insertions introduce dUMP binding cooperativity into TS. Evolution may have utilized such an approach to introduce allosteric properties into other proteins as well.
In summary, we have shown apo hTS exists almost entirely in the active conformation, populating the inactive conformation to only 1.3%. This means that there is essentially no change in the structure of hTS upon dUMP binding, indicating that the mechanism of the entropically-driven binding cooperativity is primarily dynamic in nature. Indeed, we have determined that there is substantial rigidification of hTS on the ps-ns timescale upon dUMP binding, primarily around the binding site and in regions involved in the active-inactive switching. Further, we find that this rigidification is absent in two cases of hTS binding nucleotide non-cooperatively (TMP binding to full length hTS and dUMP binding to Δ25 hTS). Finally, we have shown that this rigidification is largely due to interactions between the intrinsically disordered N-terminus of hTS (a 25 residue segment that is absent in all crystal structures of the enzyme) and the rest of the protein which are coupled to dUMP binding, a novel mechanism of dynamic allostery. Together, these results provide a rare depth of insight into the mechanism of substrate binding cooperativity in hTS.
Competing Interests
There are no competing interests.
Supplemental Information
Methods
Additional information on analysis of CPMG and CEST data
As mentioned in the main text, our in-house script for global analysis of CPMG and CEST data calculates R2,eff (CPMG) and normalized intensity (CEST) values from the exchange parameters using the Bloch-McConnell equations. Matrices describing the evolution of the magnetization are given below for the BAC 3-state model. In the case of the MQ CPMG, separate matrices are used for the double quantum (DQ) and zero quantum (ZQ) components of the MQ coherence: where R2,SQ(MQ) is the SQ (MQ) transverse relaxation rate, kxy is the rate of transitioning from state x to state y, and Δωx,yz is the chemical shift difference between states y and z on nucleus X. For analysis of the CEST data, the following evolution matrix was used: where R1(2) is the longitudinal (transverse) relaxation rate, px is the population of state x, kxy is the rate of transitioning from state x to state y, dx is the chemical shift of state x, and ω1 is the spin lock power. The chemical shift of the major state, da, is calculated assuming that the observed resonance is at the population weighted average shift of states a and c (the states connected by the fast processes).
Loss of slow process in Δ25 hTS shown by 1D selective CEST and CPMG
For 13C CEST, a 0.2 mM sample of ILV CHD2 apo Δ25 hTS in NMR buffer (99.8% D2O) was prepared as described in the main text (same sample used for 2H relaxation). A 1D selective version of the 13C CEST experiment was run on L192 and L198. Datasets were collected with 25 Hz 13C spin lock power, 500 Hz power 2H decoupling during the relaxation period, and 100 Hz power spin locks (1H and 13C) for Hartmann Hahn transfers. Peak intensities were obtained in NMRPipe.
For CPMG experiments, a 0.2 mM sample of LV CH3 apo Δ25 hTS in NMR buffer (99.8% D2O) was prepared as described in the main text. MQ CPMG datasets were collected at 850 and 600 MHz. One field (850 MHz) of 13C SQ CPMG was collected.
Lack of cooperativity in hTS binding TMP and Δ25 hTS binding dUMP shown by ITC
For ITC experiments with TMP binding to full length hTS, 0.05, 0.15, and 0.2 mM samples of unlabeled hTS were prepared as described, with the exception that the final buffer used 1 mM TCEP as the reducing agent instead of DTT. ITC experiments were conducted and analyzed as described previously (Bonin et al., 2019) using 1.8, 5.2, and 7.7 mM TMP, respectively (source code 14-15). For ITC experiments with dUMP binding to Δ25 hTS, 0.025, 0.05, and 0.1 mM samples of unlabeled Δ25 hTS were prepared as described above. The final buffer also included 1 mM EDTA for these samples. ITC experiments used 0.5, 1, and 1.9 mM dUMP, respectively.
µs-ms motion in folate binding helix shown by 1H CPMG 2-plane
A 0.3 mM sample of ILV CH3 apo hTS in NMR buffer (99.8% D2O) was prepared as described in the main text. A 1H SQ methyl TROSY CPMG (Yuwen, Huang, Vallurupalli, & Kay, 2019) dataset was collected at 850 MHz with 2 planes (50 and 2000 Hz vcpmg).
Results
Comparison of 3-state models for µs-ms motion indicates BAC model is most applicable
8 of the 10 probes involved in the concerted process fit better to a 3-state model than a 2-state model (Supplementary Table 1). For 3 of these probes – L192, L198, and I237 – the difference in the goodness of fit between the 2 and 3-state (bifurcated) models is quite pronounced (, and 2.94, respectively). For the other 5 probes, the difference in goodness of fit is much smaller, though the is smaller for the 3-state fit in all cases. For L101, L131, and L221, while the presence of the slower, concerted process is clear in the CEST data, the faster motion is seen clearly in the other methyl group from the same residue (Supplementary Figure 1a), providing additional justification for applying a 3-state model. For V79 and L121, the slower, concerted process is not clearly seen in the CEST data due to a small Δωc,ab. However, the presence of the slower, concerted process can be seen in the spike in R2,eff at low , which is only captured by the 3-state model (Supplementary Figure 1b).
For these 8 residues, several types of 3-state models are possible. We consider a linear model (A↔B↔C), in which the major state A is connected to a single minor state, and the two minor states are connected to each other, and a bifurcated linear model (B↔A↔C), in which the major state is connected to both minor states. We do not consider a triangular model, as the simpler linear models are sufficient to faithfully reproduce the data. The linear and bifurcated models provide equally good fits for all of these probes.
For all 8 of these 3-state probes, we have chosen to employ the bifurcated model. This decision was based on the populations and exchange rates obtained for the fits to the two different models. With the bifurcated model, all 8 of these probes are well fit with kex,b = 240 s−1 and pb ≅ 1.3% (pb can vary slightly between these probes to account for variability in pc, the individual rates kab and kba are identical however), indicating that they are involved in a concerted process. In the case of the linear model, however, the populations and exchange rates are not in agreement between these probes (Supplementary Table 1). Thus, employing the linear model would be to say that the agreement in population and exchange rate seen in the case of the bifurcated model is purely coincidental, which is unlikely. Consequently, we prefer the bifurcated model, which has been used throughout the main text.
Δ25 hTS lacks the slower, concerted process, yet still displays the faster µs-ms motion
1D selective CEST data were collected on L192 and L198, in addition to 3 CPMG datasets (MQ 850 and 600 MHz, 13C SQ 850 MHz), in apo hTS Δ25 (source data 20-22). The CPMG data are fit well by a 2-state model for all probes, and the probes showing 3-state exchange involving the slow, concerted process in the full length apo enzyme have parameter values similar to those of the faster process from the full length (compare V79, L121, L192, and L198 in Supplementary Tables 2 & 4, Supplementary Figure 2a). Consistent with this, the CEST data on L192 and L198 of Δ25 hTS lack a minor state dip (Supplementary Figure 2c), further demonstrating the loss of the slow, concerted process. Notably, the parameter values do not match the full length fast process values for all probes. Consider L259, which has kex,ac = 860 ± 70 s−1 and |Δωc,ac| = 2.7 ± 0.2 ppm in the full length, but kex = 3800 ± 200 s−1 and |Δωc| = 1.5 ± 0.2 ppm in the truncation. This indicates that the N-terminus influences these motions, at least for some probes. Overall, the agreement between 13C |Δω| in full length (faster process) and Δ25 is reasonably good (Supplementary Figure 2b). In addition, the ground state chemical shifts are virtually identical for the full length and truncated enzymes (Figure 7 of the main text). Together, these results suggest that similar configurations are being accessed in both cases.
hTS binding TMP and Δ25 hTS binding dUMP lack cooperativity
ITC experiments were conducted on hTS binding TMP and Δ25 hTS binding dUMP (source data 23-28) as we have done previously for full length hTS binding dUMP (Bonin et al., 2019). Fits to these data using a general two-site binding model show that in both of these cases, unlike with full length hTS binding dUMP, the free energies of the two binding events are nearly equivalent, indicating a lack of cooperativity (Supplementary Figure 3). Further, we find that the individual binding enthalpies and entropies are nearly equivalent for the two binding events in each of these cases. Interestingly, the binding enthalpies and entropies for Δ25 hTS binding dUMP are both similar to the second binding enthalpy and entropy of full length hTS binding dUMP, consistent with the idea that there is some process coupled to the first binding event in full length hTS that is absent in Δ25 hTS, as we discuss in the main text (interactions of N-terminus with the protein surface). In addition, we note that the binding enthalpies and entropies for full length hTS binding TMP are similar to the first binding enthalpy and entropy of full length hTS binding dUMP; however, because TMP has the additional methyl group—and can thus make additional interactions with the protein—the interpretation is less straightforward in this case.
Acknowledgments
This work was funded by National Institutes of Health (NIH) grant GM083059 to A.L.L., and was supported in part by the National Cancer Institute of the NIH under award number P30CA016086 Cancer Center Support Grant. This study made use of NMRbox: National Center for Biomolecular NMR Data Processing and Analysis, a Biomedical Technology Research Resource (BTRR), which is supported by NIH grant P41GM111135 (NIGMS). The content is solely the responsibility of the authors and does not necessarily represent the official views of the NIH. We thank Dr. Stuart Parnham of the UNC Biomolecular NMR Facility for assistance in NMR data collection and Dr. Ashutosh Tripathy of the UNC Macromolecular Interactions Facility for assistance in ITC data collection. We also thank Dr. Qi Zhang for generously providing a 1D selective 13C CEST pulse program as well as a script for analysis of CEST data, which were slightly modified for our use here.