Abstract
The Brucella abortus general stress response sigma factor, σE1, directly and indirectly regulates the transcription of dozens of genes that influence stress survival and host infection. Characterizing the functions of σE1 regulated genes therefore contributes to understanding of B. abortus physiology and infection biology. Transcription of the IclR family regulator, Bab2_0215, is indirectly activated by σE1 but its function remains undefined. We present a structural and functional characterization of Bab2_0215, which we have named Brucella adipic acid activated regulator (BaaR). BaaR adopts a classic IclR-family fold and directly regulates the transcription of two operons with predicted roles in carboxylic acid oxidation. BaaR binds two sites on chromosome II between baaR and a divergently transcribed hydratase/dehydrogenase (acaD2), and represses transcription. We identified three carboxylic acids (adipic acid tetradecanedioic acid, ε-aminocaproic acid) and a lactone (ε-caprolactone) that enhance transcription from the baaR and acaD2 promoters. However, neither the activating acids nor caprolactone enhance transcription by binding directly to BaaR. Induction of baaR transcription by adipic acid requires the gene bab2_0213, which encodes a major facilitator superfamily transporter, suggesting that Bab2_0213 transports adipic acid across the inner membrane. We conclude that a set of structurally related organic molecules activate transcription of genes repressed by BaaR. Our study provides molecular-level understanding of a gene expression program regulated downstream of σE1.
INTRODUCTION
Microbes use numerous mechanisms to modulate their physiology in response to changes in the intracellular and extracellular environments (1). A fundamental mechanism required for physiological adaptation is the regulation of gene expression. The Gram-negative bacterium, Brucella abortus, is a facultative intracellular pathogen that can cause abortion in mammals, and is among the most common zoonotic pathogens globally (2,3). B. abortus encodes an extracytoplasmic function-type sigma factor, σE1, which directly and indirectly regulates transcription of approximately 100 genes in response to environmental perturbation. σE1-dependent transcription confers resistance to multiple environmental stressors and is required for maintenance of chronic B. abortus infection in a mouse model (4–7). Assigning physiological and/or biochemical functions to σE1-regulated genes is therefore important for understanding B. abortus stress physiology and infection biology.
Though several genes in the B. abortus σE1 regulon have been characterized (4,5,7–10), the functions of the majority of σE1-regulated genes remain undefined. Gene bab2_0215, which encodes a predicted IclR-family transcriptional regulator, was identified as having significantly reduced expression in a σE1 deletion strain (ΔrpoE1) (4). IclR proteins are conserved across bacteria and archaea and have been reported to control the transcription of genes involved in a range of processes (11-;13), including carbon catabolism (14-;20), biofilm formation (21), quorum sensing (22,23), virulence (24-;26), stress response (27), antibiotic resistance (28,29), amino acid and secondary metabolite biosynthesis (30-;32), motility (33), and sporulation (34,35). However, the functional roles of IclR-family regulators in Brucella spp. remain largely unexplored. Herein, we present a structural and functional characterization of Bab2_0215, which we have named Brucella adipic acid activated regulator, or BaaR. The experimental data presented in this manuscript define BaaR as a transcriptional repressor, identify the regulatory targets of BaaR, and reveal chemical signals that derepress transcription of genes inhibited by BaaR in vivo.
Specifically, we have solved an X-ray crystal structure of BaaR, which revealed a classic IclR fold (11) with a C-terminal ligand binding domain (LBD) and an N-terminal helix-turn-helix (HTH) DNA-binding domain. We demonstrate that deleting baaR (ΔbaaR) results in strong transcriptional upregulation of four genes located adjacent to baaR on chromosome II of B. abortus. This regulated gene set shares sequence similarity with characterized dicarboxylic acid (dca) β-oxidation operons from Acinetobacter and Pseudomonas (36-;39). We found that BaaR functions as a transcriptional repressor by binding to two conserved palindromic motifs between baaR and bab2_0216 (previously annotated as acaD2 (acyl-CoA dehydrogenase 2) (40)). A set of structurally related organic molecules enhanced transcription from a BaaR-dependent transcriptional reporter in vivo. Activation of transcription by one of these molecules, adipic acid, required the transporter gene bab2_0213, providing evidence that bab2_0213 encodes an adipic acid transporter. However, none of the small molecules that activate transcription in vivo were found to bind directly to purified BaaR in vitro. We thus conclude that the molecular signal(s) that directly control BaaR-dependent transcription in the cell are distinct from the activating molecules we identified via selective addition to the growth medium.
RESULTS
Regulation of baaR by σE1 is likely indirect, and baaR does not contribute to B. abortus hydrogen peroxide (H2O2) resistance
Previously, wild-type (WT) B. abortus strain 2308 and B. abortus 2308 harboring an in-frame deletion of the general stress regulator rpoE1 (encoding σE1) were subjected to H2O2 stress, and differences in gene expression between the two strains were assessed by RNAsequencing(RNA-seq)(4). Transcription of baaR was decreased two-fold in the ΔrpoE1 strain relative to the WT strain (Figure 1A), suggesting that baaR is directly or indirectly activated by σ E1. We could not identify a σE1-binding site in the baaR promoter region, which suggests that this regulatory effect is indirect. To evaluate the contribution of baaR to σE1-dependent protection against H2O2 stress, we measured the survival of the WT, ΔrpoE1, and ΔbaaR strains after treatment with 5 mM H2O2. Survival of ΔrpoE1, assessed by enumerating colony forming units (CFU) on solid medium after hydrogen peroxide treatment, was reduced by approximately 1 order of magnitude while ΔbaaR survival did not differ from WT survival (Figure 1B). We thus concluded that decreased expression of baaR in ΔrpoE1 does not contribute to the viability defect of ΔrpoE1 under the assayed condition.
BaaR adopts a classic IclR family fold
To better understand the structure and function of BaaR, we expressed, purified, and crystallized the BaaR protein and solved its structure to 1.95 Å resolution (Rfree = 21.2%, Rwork = 17.7%) (see Table S1 for data collection and refinement statistics). Two BaaR dimers were present in the crystallographic asymmetric unit, and each monomer adopted the classic fold of IclR proteins (11). The monomeric protein consisted of an N-terminal winged HTH domain (residues F39-D101), α-helical linker (α4, residues I102-L115), and C-terminal LBD (residues M116-P284) (Figure 2A, B, and C). The HTH DNA-binding domain contains three α-helices (α1, α2, and α3) and two β-strands (β1 and β2) (Figure 2A and C). Remarkably, in comparison with typical IclR protein sequences, BaaR has an unusually long N-terminal region. This extension is approximately 38 amino acids (from residue M1-Q38) and is similar in size to the N-termini of Acinetobacter DcaR and DcaS and Pseudomonas P1630 (Figure 2C and Figure S1). For crystallization, a trimmed version (residues K21-P284) of BaaR was used; the N-terminus appeared to be mostly unstructured with the exception of residues G31-D36, which adopted an α-helical fold (α1’) in three out of four monomers (Figure 2A and C). The functional relevance of this region is unknown; we cannot exclude the possibility that an alternative start codon is used for protein translation in vivo.
The BaaR LBD consists of five α-helices (α5, α6, α7, α8, and α9) and seven anti-parallel β-strands (β3, β4, β5, β6, β7, β8, and β9) arranged in a semi-circular β-scaffold. The β-scaffold is partially occluded by α6 and folds to form a cavity in the LBD (Figure 2A and C). In the LBD cavity of each IclR protein, we observed extra electron density consistent with a bound acetate molecule (Figure 2A and B). This molecule is likely derived from the crystallization solution, which contained 200 mM calcium acetate. Notably, the acetate occupied the same position as pyruvate or glyoxylate molecules that have previously been reported to bind to the LBD of Escherichia coli IclR (41,42) (Figure 2B).
Protein sequence alignment of BaaR, Acinetobacter DcaR (ACIAD1688) and DcaS (ACIAD1684), and Pseudomonas PA1630 revealed high sequence homology and common secondary structural features (Figure 2C). All have HTH domains with long N-termini; these proteins also have LBD cavities comprising very similar residues, suggesting that they recognize and respond to identical or similar small molecules and interact with target DNA in a comparable manner (Figure 2C and S1). The two BaaR dimers present in the asymmetric unit are highly superimposable and displayed very few structural differences (RMSD = 0.76). IclR-family proteins have been found to adopt dimeric or tetrameric conformations in X-ray structures, in solution, or in their interactions with DNA (11,41,43-;45). Therefore, even if BaaR crystallizes as a dimer in vitro, it potentially exists in different oligomeric states in vivo.
BaaR represses the transcription of a set of genes with similarities with the dca operon
Our crystal structure clearly identified BaaR as an IclR-family transcriptional regulator capable of binding a carboxylic acid (acetate) via its LBD. To identify genes specifically regulated by BaaR, we measured the global transcriptomic profile of the ΔbaaR strain using RNA-seq and compared it with that of the WT strain (Table S2). Among the differentially expressed genes, four genes were highly upregulated in ΔbaaR relative to WT (Figure 3A). These four genes, bab2_0213, bab2_0214, bab2_0216, and bab2_0217, are contiguous and adjacent to baaR (bab2_0215). Genes bab2_0213, bab2_0214 and bab2_0215 are located on the opposite strand from bab2_0216 and bab2_0217, and the two gene sets are likely divergently transcribed (Figure3B). bab2_0213 is annotated as a MucK transporter, a member of the major facilitator superfamily (MFS). A transporter related to bab2_0213 in Acinetobacter sp. ADP1, is involved in cis,cis muconic acid uptake (39). bab2_0214 is annotated as an acyl-CoA dehydrogenase; this family of flavoproteins catalyzes α,β-dehydrogenation of fatty acid acyl-CoA conjugates (46,47). bab2_0216 and bab2_0217 are annotated as pseudogenes. However, this annotation appears to be incorrect: a search of Pfam (48) using the primary structures of these loci suggested that bab2_0216 (acaD2), is in fact two fused, in-frame genes that correspond to an enoyl-CoA hydratase/isomerase and a 3-hydroxyacyl-CoA dehydrogenase. Both of these enzymes are predicted to be involved in β-oxidation of fatty acids (49,50). Our transcriptomic data corroborate a recent proteomic study in B. abortus in which a small peptide corresponding to the Bab2_0216 N-terminus was identified by mass spectrometry (51), suggesting that the full-length “fusion” protein is expressed.
bab2_0217 encodes a protein with homology to CoA-transferase family III, a class of enzymes that catalyzes reversible transfer reactions of coenzyme A groups from CoA-thioesters to free acids (52). An early stop codon present in the sequence of this gene truncates the corresponding protein by 45 residues relative to related CoA-transferase family III proteins. The adjacent gene bab2_0218 includes these 135 nucleotides missing from bab2_0217; the functional significance of bab2_0217 truncation is not known.
Two additional gene sets were differentially regulated in ΔbaaR relative to WT. The first corresponds to 10 adjacent genes (bab2_1036-bab2_1046) (Figure 3A) with predicted enzyme functions similar to those associated with the bab2_0213-bab2_0217 operon. Two of the most strongly upregulated genes, bab2_1046 and bab2_1045, are annotated as enoyl-CoA hydratase/isomerase and 3-hydroxyacyl-CoAdehydrogenase, respectively, and may have functionally redundant roles with bab2_0216.Gene bab2_1036 is annotated as a CoA-transferase family III protein and may be redundant with bab2_0217. Expression of the second set of genes, corresponding to bab2_0277-bab2_0282 (Figure 3A) was significantly lower in ΔbaaR relative to WT. The majority of these genes encode components of an ATP-binding-cassette (ABC) transport system predicted to be involved in branched chain amino acid transport. Comparison of the amino acid sequence of the cognate periplasmic binding protein (PBP) with the sequences of PBPs that co-crystallize with bona fide ligands revealed that Bab2_0282 shares 54% identity with a Burkholderia mallei PBP (Protein Data Bank [PDB]: 3I09) that co-crystallizes with acetoacetate. Residues involved in the interaction with acetoacetate in this PBP are conserved in Bab2_0282 (Figure S2), suggesting that the B. abortus bab2_0278-bab2_0282 ABC transporter operon is involved in uptake of acetoacetate or a related molecule. Acetoacetate is produced in the liver during ketogenesis. Under certain conditions, the acetyl-CoA formed in the liver from β-oxidation of fatty acids can be converted into ketone bodies (acetoacetate, D-β-hydroxybutyrate, and acetone) for export to other tissues (53,54). This Brucella ABC transporter operon is proximal to a gene (bab2_0277)annotated as a glucose/methanol/choline oxidoreductase, which is also expressed at significantly lower levels in ΔbaaR. In B. mallei, a similar gene (BMA2933) also co-occurs with the related ABC transporter, suggesting that this system may have a function in ketone metabolism.
Finally, genes bab1_0303 (UreG1 urease accessory protein), bab1_0578 (BetI TetR transcriptional regulator), bab1_0914 (DUF1127), and bab2_0548 (ABC transmembrane transporter) also showed significant differential regulation in our data set. The functional significance of these transcriptional changes is not known (see Table S2 for the full data set).
BaaR binds palindromic motifs in its own promoter region
To evaluate the mechanism of BaaR-dependent transcriptional repression, we measured binding between purified BaaR and a region of DNA corresponding to its promoter. Since the IclR protein family recognizes and specifically interacts with palindromic motifs (11), the DNA sequence corresponding to the promoter region between baaR and bab2_0216 was analyzed for palindromes. We identified two similar palindromic regions that were 44 and 35 nucleotides away from the bab2_0216 and baaR start codons, respectively. These two regions were named BaaR binding site 1 (BBS1) and BaaR binding site 2 (BBS2), and each consisted of two overlapping palindromic sequences (Figures 4 and 5). A 375-nucleotide fluorescent DNA probe corresponding to the promoter region between baaR and bab2_0216 was used for gel shift experiments. As expected, 5 ng of this “long” fluorescent DNA probe corresponding to the WT sequence (LWF: long, wild-type, fluorescent) was shifted in size on the gel in the presence of increasing concentrations (2-500 nM) of purified BaaR, confirming that BaaR interacts with the DNA region between bab2_0215 and bab2_0216 (Figure 4A, (1)).
To determine if this interaction was specific, we conducted a series of control experiments. As previously observed, 5 ng of the LWF probe were shifted in size when mixed with increasing concentrations (62-500 nM) of BaaR (Figure 4A, (2)). However, this shift was weakened when 5 ng of the LWF probe were mixed with 500 nM BaaR, a concentration at which all of the DNA probe was shifted, and increasing concentrations (5-200 ng) of an equivalent unlabeled (non-fluorescent) DNA probe (LWU: long, wild-type, unlabeled), indicating that the fluorescent and unlabeled probes competitively interacted with BaaR (Figure 4A, (3)). This result suggests that the interaction between BaaR and its promoter is specific. In a related control, 5 ng of the LWF DNA probe and 50 ng of an BBS-mutated unlabeled DNA probe (LMU: long, mutated, unlabeled) were mixed together. This mutated probe did not disrupt the BaaR/LWF interaction, suggesting BaaR binding requires the BBS1 and BBS2 regions (Figure 4A, (4)). Finally, when we performed a gel shift assay with a fluorescent DNA probe carrying mutated BBS1 and BBS2 (LMF: long, mutated, fluorescent), no shift was observed, even at the highest BaaR concentrations (Figure 4A, (5)). We conclude that BaaR constitutively and specifically interacts with the bab2_0215-bab2_0216 promoter region, and this interaction requires BBS1 and BBS2. Equivalent gel shift assays were conducted using a shorter DNA probe (196 nucleotides) harboring only one BBS (BBS2) (Figure 4B). This probe behaved exactly the same as the long probe in the presence of the purified BaaR (Figure 4B). Control experiments performed with the different unlabeled or mutated DNA probes also confirmed the specificity of this interaction (Figure 4B). As discussed above, BaaR contains approximately 38 additional amino acids at its N-terminus. To assess the role of this N-terminal extension in the interaction between BaaR and its target DNA, we performed gel shift assays using a BaaR mutant protein missing these additional N-terminal amino acids. We observed no significant differences in probe shift between the short (residues V40-P284) and WT BaaR proteins; both resulted in shifts of the long (289 nucleotides, contains BBS1 and BBS2) and short (196 nucleotides, contains BBS2) fluorescent DNA probes (Figure S3).
The palindromic regions between baaR and bab2_0216 are required for recognition by BaaR
To identify the motifs in the BBS region between baaR and bab2_0216 required for interaction with BaaR, each palindrome of BBS2 was independently mutated. We then measured binding of the corresponding 196-nucleotide fluorescent DNA probe to BaaR by gel shift assay. In comparison to the WT BBS2 containing probe, no gel shift was observed when the first half of the first palindromic motif (region 1) was mutated, suggesting no interaction between the DNA probe and BaaR (Figures 5A and 5B). Mutation of BBS2 region 2, corresponding to overlapping region between the first and second palindromic motifs, also ablated binding of the probe to BaaR (Figures 5A and 5B). Mutation of the second half of the second palindrome (region 3) resulted in an intermediate effect; a partial gel shift of the corresponding DNA probe was still observed with the highest BaaR concentrations (250 and 500 nM) (Figure 5A and 5B). As expected, mutating regions 1, 2 and 3 completely ablated a gel shift (Figure 5B). We conclude that regions 1 and 2, present in the TTTCGC/GCGAAA palindrome, are required for interaction with BaaR, and that region 3 plays a minor role in the BaaR/DNA interaction. We note that DNA regions upstream of bab2_0277-bab2_0282 and bab2_1036-bab2_1046 do not contain similar palindromic sequences recognized by BaaR. This suggests that the transcriptional regulation of these loci observed in our RNA-seq data is indirect.
BaaR interacts with BBS1 and BBS2 in vivo and regulates transcription of the bab2_0213-bab2_0217 operon
We next evaluated whether BaaR interacts with the baaR-bab2_0216 promoter region in vivo, and whether both BBSs are required for transcriptional regulation in B. abortus. We transformed WT and ΔbaaR strains with a plasmid carrying a transcriptional fusion of the intergenic region between bab2_0215 and bab2_0216 to lacZ. This lacZ transcriptional reporter construct (PbaaR-lacZ) contains the baaR promoter region including both BBS1 and BBS2.
In the WT strain, β-galactosidase activity was low, suggesting constitutive repression of transcription by BaaR. In the ΔbaaR strain, β-galactosidase activity was increased by a factor of 10 relative to WT, suggesting that deletion of baaR derepresses transcription under the control of its own promoter (Figure 6A, (1)). Surprisingly, mutation of BBS1 and BBS2 (BBS1mut/BBS2mut) resulted in low β-galactosidase activity in both strains. It is likely that these tandem BBS1 and BBS2 mutations disrupt the ability of RNA polymerase to induce transcription from this promoter (Figure 6A, (1)). Mutation of BBS1 alone (BBS1mut/BBS2WT) had little effect on BaaR-dependent transcriptional repression: β-galactosidase activity was low in the WT and high in the ΔbaaR strain (Figure 6A, (1)). However, in the WT strain, the measured β-galactosidase activity was higher from the BBS1mut/BBS2WT than from the BBS1WT/BBS2WT reporter. This indicates that the integrity of both BBSs is likely required for efficient repression by BaaR, perhaps by permitting multiple BaaR dimers to interact simultaneously. Mutation of BBS2 alone (BBS1WT/BBS2mut) resulted in low β-galactosidase activity in both the WT and ΔbaaR strains, further supporting that RNA polymerase cannot efficiently induce transcription from this sequence (Figure 6A, (1)). We conclude that the integrity of BBS2 is essential for the proper interaction of transcription factors at this promoter.
When half of the intergenic region present between baaR and bab2_0216 was fused to lacZ, the corresponding reporter gene (1/2PbaaR-lacZ) behaved similarly to the BBS1mut/BBS2WT reporter: β-galactosidase activity was low in the WT and high in the ΔbaaR strain (Figure 6A, (2)). Again, transcription from the corresponding reporter with only one BBS (BBS2WT) was not as repressed as that from the reporter containing both BBS sequences (BBS1WT/BBS2WT) (Figure 6A, (2)). Mutation of BBS2 (BBS2mut) resulted in low β-galactosidase activity in both strains and could be attributed to a possible disruption in transcription (Figure 6A, (2)). To overcome this problem, we mutated smaller regions of BBS2. When BBS2 region 1 (BBS2R1) or 2 (BBS2R2) was mutated, the corresponding β-galactosidase activity was high in both the WT and mutant strains (Figure 6A, (2)). From these data, we conclude that the integrity of the transcription initiation site is preserved in these constructs. This result also confirmed that BaaR in the WT strain fails to interact with BBS2R1 or BBS2R2. When region 3 (BBS2R3) was mutated, intermediate β-galactosidase activity was measured in both strains (Figure 6A, (2)), which confirmed our previous in vitro observations (Figure 5B). Taken together, these results suggest that BBS2 is required for BaaR-dependent transcriptional regulation of bab2_0215, bab2_0214, and bab2_0213. However, the presence of BBS1 ensures even greater transcriptional repression. WT or ΔbaaR strains carrying the empty vector (pMR15) or the baaR complemented strain were used as controls (Figure 6A, (3)).
We next evaluated whether transcription from bab2_0216-bab2_0217 exhibited a similar transcriptional profile to baaR. We constructed a new lacZ transcriptional reporter in which the reversed and complemented intergenic sequence between baaR and bab2_0216 was fused to lacZ (Pbab2_0216-lacZ). This construct was transformed into the WT or ΔbaaR strains. β-galactosidase activity in ΔbaaR was fivefold higher than that in WT, providing evidence that BaaR represses transcription from this reporter as well (Figure 6B, (1)). The β-galactosidase activity observed under this reporter was generally lower than that under PbaaR-lacZ, suggesting weaker transcription from this promoter. When BBS1 and BBS2 were mutated simultaneously (BBS1mut/BBS2mut), both the WT and ΔbaaR strains exhibited increased β-galactosidase activity (Figure 6B, (1)). However, in the WT strain, these activities were higher and comparable with the β-galactosidase activity levels measured in the ΔbaaR strain carrying the BBS1WT/BBS2WT reporter gene. In both strains, mutation of BBS2 only (BBS1WT/BBS2mut) had no effect on β-galactosidase activity, whereas mutation of BBS1 only (BBS1mut/BBS2WT) induced greater activity (Figure 6B, (1)).
Lastly, a reporter containing half of the bab2_0216 promoter region was evaluated (1/2Pbab2_0216-lacZ) (Figure 6B, (2)). Transcriptional activity under this reporter in the WT strain was fivefold lower than that in the ΔbaaR strain and was comparable with that in the BBS1WT/BBS2mut reporter strains (Figure 6B, (2)). When BBS1 was mutated, activity increased in both strains and was comparable with that in the BBS1mut/BBS2mut reporter strains (Figure 6B, (2)).
Together, these results provide evidence that BBS1 is required for BaaR-dependent transcriptional regulation of bab2_0216 and bab2_0217. BBS1 and BBS2 mutations did not disrupt the ability of RNA-polymerase to induce transcription from this promoter, suggesting that the bab2_0216-bab2_0217 initiation site does not overlap with BBS1 or BBS2.
ε-aminocaproic acid derepresses transcription from a BaaR-regulated promoter
BaaR, like other IclR proteins, has a C-terminal LBD with a cavity accommodating small molecules. Interaction with specific molecules can positively or negatively modify the affinity of the protein for its target DNA (11,14,17,41,42,44,55). We screened for small molecules that affect transcription from a BaaR-regulated reporter plasmid. Specifically, we transformed WT Brucella ovis, a closely related Biosafety level 2 (BSL2) surrogate for B. abortus, with the PbaaR-lacZ reporter and inoculated this strain into 96-well plates containing 480 distinct, individual small molecules. A single molecule, ε-aminocaproic acid, activated transcription from the PbaaR-lacZ reporter under this cultivation condition (Figure 7A). We confirmed this hit in a B. abortus strain carrying the same reporter plasmid (Figure 7B). ε-aminocaproic acid is a six-carbon molecule with a carboxyl and amine group. It is a lysine derivative and analog used in clinical settings to promote blood clotting (56,57). In this same transcription induction screen, acetate and acetoacetate did not affect transcription (Table S3). We thus conclude that neither acetoacetate nor acetate are ligands that induce transcription, even though we observe acetate bound to the LBD in the BaaR crystal structure.
Adipic acid, tetradecanedioic acid, and ε-caprolactone also derepress transcription
Given the results of our initial screen, we evaluated other related small molecules for their ability to activate transcription from a BaaR-regulated reporter. Selection of these molecules was based on their metabolic and physiological properties and chemical and structural similarities shared with ε-aminocaproic acid (Figure S4). To narrow the number of molecules to be tested, the sequence of BaaR was compared with those of IclR proteins previously described to regulate similar metabolic pathways. BaaR shares 59% and 54% identity with DcaS (ACIAD1684) and DcaR (ACIAD1688), two Acinetobacter IclR proteins potentially involved in the transcriptional regulation of a dca β-oxidation operon (36,37,58). BaaR also has high identity (66%) to the Pseudomonas DcaR protein (PA1630) involved in regulation of ε-caprolactam catabolism and β-oxidation (36,38). In Acinetobacter ADP1 and P. aeruginosa, dca operons have been previously described as essential for growth on adipic acid or ε-caprolactam as the sole carbon sources (36,38). Interestingly, a cis,cis muconic transporter (ACIAD1681) is proximal to the Acinetobacter dca operon (39); this transporter is 67% identical to Bab2_0213 in B. abortus. The ability of adipic acid, ε-caprolactam, and cis,cis, muconic acid to derepress transcription of PbaaR-lacZ was therefore investigated in B. abortus. Addition of cis,cis muconic acid did not enhance transcription, but 4 mM of adipic acid strongly activated transcription (Figure 7B and Figure S4). To evaluate the specificity of this activation, shorter or longer dicarboxylic acids (C3 to C14) were assessed as well. Only tetradecanedioic acid, a C14 dicarboxylic acid, significantly derepressed transcription from our reporter (Figure 7B and S4).
Trans,trans muconic acid, a dicarboxylic acid closely related to cis,cis muconic acid, was also evaluated, but it had no effect on transcription from the reporter (Figures 7B and S4). Interestingly, the six-carbon fatty acid caproic acid had no effect on BaaR-dependent repression of PbaaR-lacZ reporter gene transcription, while its cyclic form, ε-caprolactone (59), significantly derepressed transcription (Figure 7B and S4). Conversely, ε-caprolactam, a cyclic ε-aminocaproic acid (60), had no effect on transcription (Figure 7B and S4). As a control, we cultivated the reporter strain in the presence of DMSO, which was used to solubilize most of the small molecules evaluated. Transcription from this reporter was unchanged by addition of the DMSO (Figure 7B). We also confirmed that the different molecules had no effect on an empty vector control strain (Figure 7B). All molecules were also assessed in a B. abortus strain carrying the Pbab2_02i6-lcicZ reporter. β-galactosidase activity was significantly enhanced in the presence of 4 mM ε-aminocaproic acid, adipic acid, tetradecanedioic acid, and ε-caprolactone (Figure 7C).
Evidence that adipic acid is transported by Bab2_0213, an MFS transporter
We next evaluated whether the molecules found to induce transcription from a BaaR-dependent reporter (PbaaR-lacZ) are specifically transported by the MucK-like transporter Bab2_0213. We also tested whether Bab2_0214 (acyl-CoA dehydrogenase), Bab2_0216 (enoyl-CoA hydratase/isomerase and 3-hydroxyacyl-CoA dehydrogenase), and Bab2_0217 (CoA-transferase family III) affect BaaR-regulated transcription. We generated in-frame deletions of each of these genes in B. abortus and transformed the corresponding null mutant strains with the PbaaR-lacZ reporter plasmid. Each deletion strain was grown in the presence of increasing concentrations of the different activating molecules, and β-galactosidase activity was measured under each condition.
Transcription reporter activity in all four null mutant strains was the same as that in the WT in the presence of ε-aminocaproic acid, tetradecanedioic acid, or e-caprolactone (Figure 8A-C). However, the strain harboring the bab2_0213 deletion exhibited significantly lower transcriptional activity than the WT strain and other deletion strains in the presence of adipic acid (Figure 8D). Complementation of Δbab2_0213, by re-introducing a WT copy of bab2_0213, restored the WT transcriptional phenotype (Figure 8E). We conclude that, at the concentrations tested, Bab2_0213 is involved in transport of adipic acid. It is not known how ε-aminocaproic acid, tetradecanedioic acid, or ε-caprolactone is transported. We further conclude that deletion of bab2_0214, bab2_0216, or bab2_0217 did not affect the response of B. abortus to these inducing molecules. This provides evidence that none of these enzymes are required for BaaR-dependent transcriptional regulation by adipic acid, ε-aminocaproic acid, tetradecanedioic acid, or ε-caprolactone.
Adipic acid, ε-aminocaproic acid, tetradecanedioic acid, and ε-caprolactone do not interact directly with BaaR
Given the ability of particular organic acids to derepress transcription from a BaaR-dependent reporter in vivo, we next evaluated whether adipic acid, ε-aminocaproic acid, tetradecanedioic acid, or ε-caprolactone modify BaaR binding to its target DNA. We mixed a fluorescent DNA probe corresponding to the BBS2 region with purified BaaR and (separately) 1 mM of each small molecule. We conducted this experiment using a range of BaaR concentrations.
None of the molecules tested had any effect on BaaR binding to the probe (Figure 9A-E). However, the possibility that these molecules interact with the BaaR LBD without affecting the interaction of BaaR with DNA could not be ruled out in this assay. Therefore, we also performed isothermal titration calorimetry (ITC) measurements, which allow characterization of the affinities between IclR proteins and small molecules at micromolar levels (41,55,61). Specifically, we performed ITC measurements between purified BaaR LBD and adipic acid, which is likely transported by Bab2_0213 and thus a bona fide direct activating signal. We observed no interaction between adipic acid and the LBD of BaaR, suggesting an indirect effect of adipic acid in vivo (Figure 9F).
Deleting baaR does not affect B. abortus intracellular entry or replication
As outlined earlier, the general stress response sigma factor σE1 indirectly activates transcription of BaaR. Given the known role of σE1 in B. abortus infection biology (4,7), we evaluated whether BaaR contributes to B. abortus infection in vitro. Cultured THP-1 macrophage-like cells were infected (multiplicity of infection = 100) with WT and ΔbaaR B. abortus strains. No significant differences in WT and ΔbaaR CFU recovered from infected THP-1 cells were observed at any time point evaluated (1, 24, and 48 hours post infection), suggesting that BaaR and bab2_0213-bab2_0217 repression are not required for entry or replication in a THP-1 in vitro infection model (Figure 10). This result is consistent with a previous study in which Brucella melitensis 16M with deletion of a gene orthologous to baaR, BMEII1022, was not attenuated in mouse spleen colonization at 1 week post infection (62).
Discussion
As a facultative intracellular pathogen, B. abortus is exposed to many different microenvironments during its lifecycle. The general stress response sigma factor, σE1, controls the transcription of dozens of genes and is required for B. abortus survival under stress and chronic infection conditions in mouse disease models (4,5,7,9,10). In this manuscript, we present structural and functional studies of a transcriptional regulator of the IclR family, BaaR, which is indirectly activated by σE1. BaaR strongly represses transcription from two divergently transcribed operons (Figures 3 and 6) homologous to the dca β-oxidation operons of Acinetobacter spp. and Pseudomonas spp., which have been implicated in growth on adipic acid or e-caprolactam as a sole carbon source (36-;38) (Figure 11). In Acinetobacter and Pseudomonas, it has been postulated that IclR transcriptional regulators control dca operon expression, although this hypothesis has not been tested experimentally. When compared to other IclR proteins, BaaR is closely related to Acinetobacter DcaR (ACIAD1688; 54% identity) and DcaS (ACIAD1684; 59% identity) and Pseudomonas DcaR (PA1630; 66% identity) (Figure 11). All four of these proteins possess an N-terminal extension in comparison to other IclR proteins, and very similar LBD cavities (Figures 2C and S1), suggesting they recognize structurally related small molecules. The function of the extended N-termini in these related proteins is unclear, and deletion of the N-terminus of BaaR did not affect DNA binding in vitro (Figure S3). It is possible that in a cellular context, this structural region affects protein-DNA interactions or protein stability in the presence of specific molecular signals. In vivo, BaaR represses transcription of the bab2_0213-bab2_0217 locus (including its own gene: bab2_0215). Adipic acid and other related organics relieve this repression, resulting in initiation of bab2_0213-bab2_0217 transcription. It remains unclear how transcription of this operon is maintained despite increasing concentrations of BaaR in the cell. It is conceivable that like the TtgV protein of P. putida (63,64) and other proteins belonging to the IclR family (14,15,65,66), reduced affinity of BaaR for DNA upon ligand binding is sufficient to overcome the effects of increased concentrations in the cell.
When compared to the Acinetobacter dca locus, the B. abortus bab2_0213-bab2_0217 dca-like operon (regulated by BaaR) appears incomplete. Indeed, genes essential for the β-oxidation of dicarboxylic acids in Acinetobacter are degenerate or absent in B. abortus (Figure 11). It is therefore difficult to conclude that bab2_0213-bab2_0217 is truly involved in β-oxidation metabolism. The RNA-seq studies presented here identified additional genes, present in the bab2_1036-bab2_1046 locus, that are strongly upregulated after deletion of baaR. Based on sequence homology, these genes are paralogs and likely have functions that overlap or complement bab2_0214-bab2_0217 (Figures 3 and 11). It is conceivable that like Pseudomonas PAO1, multiple clusters of dca-like genes have redundant functions in dissimilation of short‐ or medium-chain dicarboxylic acids (Figure 11) (36). No transporter related to bab2_0213 was found proximal to this set of paralogous genes or in B. abortus genome, suggesting that bab2_0213-bab2_0217 and parlalogs could process a shared substrate that is transported by Bab2_0213. Bab2_0213 has high sequence identity with MucK-like MFS transporters located proximal to the Acinetobacter (ACIAD1681 (mucK) and ACIAD1694 (dcaK); 67% and 52%) and Pseudomonas (PA1019; 59%) dca operons. In Acinetobacter, MucK is essential for growth in presence of cis, cis muconic acid but not adipic acid. A potential role for DcaK in adipic acid transport has been discussed, although it has never been experimentally investigated (Figure 11) (36,38,39). Our results provide evidence that Bab2_0213 is involved in adipic acid transport, though we cannot rule out the possibility that this protein could also transport other types of molecules. Homology between Bab2_0213 and MFS transporters associated with the dca genes in Acinetobacter or in Pseudomonas clearly suggests that the molecules transported by these systems are structurally related to adipic acid or cis,cis-muconate.
The RNA-seq analysis of WT B. abortus and the ΔbaaR strain also revealed a predicted ABC transport system (bab2_0277-bab2_0282) that was indirectly activated by BaaR. The primary structure of the periplasmic binding protein (PBP) in this system (Bab2_0282) is 54% identical to a Burkholderia mallei PBP that co-crystallized with bound acetoacetate (PDB ID: 3I09). Residues involved in this interaction with acetoacetate are also present in Bab2_0282, suggesting that Bab2_0282 may transport acetoacetate or a closely related molecule. In mammals, acetyl-CoA formed in the liver during fatty acid β-oxidation can be converted into acetoacetate and released into the bloodstream as an energy source during periods of starvation or intense physical activity (53,54). We have no evidence that exogenous acetoacetate is actively transported by B. abortus, nor do we understand the metabolic connection (if any) to the bab2_0213-bab2_0217 locus. However, it is conceivable that this system could be involved in utilizing acetoacetate or related substrates produced by the host.
In conclusion, we have demonstrated that adipic acid and the related molecules ε-aminocaproic acid, tetradecanedioic acid, and ε-caprolactone activate transcription of the bab2_0213-bab2_0217 locus in B. abortus, though these molecules do not activate transcription through a direct interaction with BaaR. This suggests that the actual activating molecule in vivo is either a metabolic product of these compounds, or that these inducing compounds activate some undefined metabolic pathway involved in the synthesis of the BaaR-activating signal. The possible relevance of such molecules in the life cycle of B. abortus and the functional significance of baaR transcriptional activation by σE1 remain undefined. Adipic acid is produced by oxidation of fatty acids but is not naturally abundant. We note that very little is known about the B. abortus life cycle outside the host. In the wild, B. abortus can persist for weeks in aborted fetuses, a major source of contagion (67). However, B. abortus can also persist for weeks in soil or on vegetation. How B. abortus survives in these harsh and competitive environments is unknown, and it is possible that the genes investigated in this study enable B. abortus to metabolize unusual substrates found outside the mammalian host. To conclude, we propose a model (Figure 12) whereby dimeric BaaR constitutively interacts with the DNA region between baaR and bab2_0216, repressing divergent transcription on both strands. When present in the environment, adipic acid is likely transported by the MFS MucK transporter Bab2_0213, resulting in derepression of transcription from the BaaR-inhibited promoters. The uptake of structurally related molecules, including ε-aminocaproic acid, ε-caprolactone, and tetradecanedioic acid, also induces transcription, although our data provide evidence that these molecules are transported by a genetically distinct system. Once in the cytoplasm, these molecules are predicted to interact with an unknown metabolic/regulatory process that leads to production of an intracellular ligand that binds to and regulates BaaR. Interaction with a ligand likely induces structural changes in BaaR that result in dissociation from DNA. The subsequent derepression of the bab2_0213-bab2_0217 locus may increase adipic acid uptake, creating a positive feedback loop. Derepressed expression of the bab2_0213-bab2_0217 locus also indirectly enhances expression of a paralogous gene set, bab2_1036-bab2_1046, while attenuating expression of a potential amino acid ABC transport system (bab2_0277-bab2_282).
Materials and methods
All experiments using live B. abortus were performed in biosafety level 3 facilities according to U.S. Centers for Disease Control (CDC) select agent regulations at the University of Chicago Howard Taylor Ricketts Laboratory.
Chromosomal deletion in B. abortus
The different B. abortus deletion strains (Δbab2_0213, Δbab2_0214, ΔbaaR [i.e., bab2_0215], Δbab2_0216, and Δbab2_0217) were constructed using a double-recombination strategy. Briefly, after PCR amplification using KOD Xtreme Hot start DNA polymerase (EMD Millipore) with B. abortus chromosomal DNA as a template, the corresponding PCR products were purified using the GeneJET PCR Purification Kit (Thermo Fisher Scientific). The in-frame deletion alleles (carrying 5’ and 3’ flanking sequences of B. abortus locus tags) were digested with restriction enzymes (New England Biolabs) before ligation using T4 DNA ligase (New England Biolabs) or were directly Gibson assembled (New England Biolabs) into the suicide plasmid pNPTS138 (M. R. K. Alley, unpublished data), which carries the nptI gene for initial selection and the sacB gene for counter-selection on sucrose. Plasmids were then transformed in E. coli Top10 strains, and single colonies carrying the plasmid with the correct insert were screened by PCR and Sanger sequenced. Sequenced plasmids were then purified from E. coli using the GeneJET Plasmid Miniprep Kit (Thermo Fisher Scientific). The WT B. abortus strain 2308 was transformed with pNPTS138 carrying the different deletion alleles by electroporation, and single-crossover integrants were selected on Schaedler Blood Agar (SBA) plates supplemented with kanamycin (50 μg/ml). Counter-selection for the second crossover event was carried out by growing kanamycin-resistant colonies overnight under nonselective conditions and then plating on SBA plates supplemented with 5% sucrose (150 mM). PCR screening to identify colonies containing the deletion alleles was performed, and the products were Sanger sequenced for verification. If necessary, genetic complementation of the deletion strain was carried out by transforming the B. abortus deletion strains with the pNPTS138 plasmid carrying the WT allele locus. The primers, restriction enzymes, plasmids, and strains used are listed in Tables S3 and S4.
RNA extraction and sequencing
Three independent cultures of the B. abortus WT and ΔbaaR strains (see Table S5 for strain information) were grown overnight in 5 ml Brucella broth (BB) (Becton Dickinson, BD) at 37°C with shaking at 220 rpm. The next morning, the OD600 of the cultures was adjusted to 0.1 in 3 ml BB and grown for another 5 hours at 37°C with shaking at 220 rpm. Cultures (final OD600 ∼0.3-0.4) were then pelleted, and the cells were immediately frozen at −80°C until RNA extraction. A hot-phenol RNA extraction protocol was performed for each pellet. Cell pellets were resuspended in 400 μl commercial phosphate buffered saline (PBS) buffer and transferred to tubes containing 200 μl SDS lysis buffer (20% SDS w/v, 0.5 M EDTA) preheated at 95°C. The tubes were gently inverted and incubated at 95°C for 5 minutes. After incubation, the contents of each tube were transferred to new tubes containing 600 μl acid phenol/chloroform preheated at 65°C, vortexed for 5 seconds, and incubated for 10 minutes at 65°C. Samples were then centrifuged for 10 minutes at 2500 × g. After centrifugation, the top aqueous phase was transferred to 600 ul acid phenol/chloroform at room temperature, vortexed, and centrifuged for 10 minutes at 2500 × g. The top aqueous phase was transferred to 500 μl chloroform/isoamyl alcohol (24:1) at room temperature, mixed, and centrifuged for 10 minutes at 2500 × g. The top aqueous phase was then transferred to a new tube containing 500 μl 100% isopropanol. Precipitation of the RNA was performed overnight at −80°C. RNA was then pelleted at maximum speed for 30 minutes at 4°C, and the pellets were washed twice with 70% ethanol, air dried, and resuspended in 80 μl RNase-free water. To remove any co-purified genomic DNA, 10 μl 10X buffer and 10 μl Turbo DNase (Thermo Fisher Scientific) were added to each sample for 2 hours at 37°C. The samples were then purified using purification columns (from the RNeasy MinElute Cleanup kit; Qiagen) and eluted with 30 μl DNase (RNase)-free water. The eluate was further digested on the column by adding 7 μl Turbo DNase, 7 μl 10X buffer, and 56 μl RNase-free water. The reaction was incubated at room temperature for 30 minutes and purified using a Qiagen RNA purification kit according to the manufacturer’s protocol.
For RNA-seq analysis, ribosomal RNA was depleted from WT and ΔbaaR samples using Ribo-Zero rRNA Removal (Gram-negative bacteria) Kit (Epicentre). Libraries were prepared with Illumina TruSeq RNA kit according to manufacturer’s instructions and were then quantified using a 2100 Bioanalyser (Agilent) and sequenced on a HiSeq2500 (Illumina). The obtained RNA-seq reads were aligned to the genome sequence of B. abortus 2308 (RefSeq AM040265) using the readmapper tool in CLC Genomics Workbench (Qiagen) (mismatch cost=2; insertion cost=3, deletion cost=3, length fraction=0.8,similarityfraction=0.8). Differential expression analysis of normalized data and false-discovery rate (FDR) p-values were calculated in CLC Genomic Workbench. RNA-seq data sets are available at the National Center for Biotechnology Information (NCBI) Gene Expression Omnibus (GEO) at accession number GSE107825.
lacZ transcriptional reporter construction
The different lacZ reporter genes used in this study were built as follows: the WT DNA fragments corresponding to the different portions of the bab2_0215 (baaR)-bab2_0216 intergenic region were PCR amplified using B. abortus chromosomal DNA as a template. A gBlocks synthetized DNA fragment (Integrated DNA Technology, IDT) correspondingtothebaaR-bab2_0216 intergenic region carrying mutated BBSs were used as a PCR template to introduce mutations in BBS1 and BBS2. DNA fragments corresponding to baaR and bab2_0216 promoter regions carrying a WT and a mutated BBS were generated by overlapping PCRs. Mutation of BBS2 region 1, region 2 or region 3 were introduced using overlapping primers carrying specific mutations. Primer sequences and information are available in Table S4. As previously described, PCRs were performed using with KOD Xtreme Hot start DNA polymerase (EMD Millipore), gel purified with GeneJET PCR purification Kit (Thermo Fisher Scientific) and digested with restriction enzymes (New England Biolabs). Ligation with the linearized pMR15 plasmid was performed using T4 DNA ligase (New England Biolabs). After ligation and transformation into E. coli Top 10 strain, single colonies carrying plasmids with the different inserts were PCR screened and sent for sequencing. The plasmids were then purified with the GeneJET Plasmid Miniprep Kit (Thermo Fisher Scientific) and transformed in WT B. ovis or in the different B. abortus genetic backgrounds (WT, Δbab2_0213, Δbab2_0214, ΔbaaR, Δbab2_0216 and Δbab2_0217) used in this study. Transformants were then selected on SBA plates supplemented with kanamycin (50 μg/ml). Primer, restriction enzyme, plasmid and strain information are available in Tables S3 and S4.
Screening for ligands that derepress BaaR in vivo
A WT B. ovis strain carrying the pMR15-PbaaR-lcicZ reporter plasmid (see Table S5 for strain information) was harvested from a fresh SBA plate supplemented with kanamycin (50 μg/ml) and resuspended at OD600= 0.1 in 50 ml of BB containing 50 μg/ml of kanamycin. 100 μl of this B. ovis suspension was then used to inoculate each well of the Phenotype MicroArray plates (Biolog). Biolog plates PM1, PM2A, PM3B, PM4A, and PM5 were used for this assay. After growth overnight at 37°C in the presence of 5% CO2, the plates were removed from the incubator, and the OD600 and β-galactosidase activities were measured under each growth condition using the Tecan Spark 20M plate reader.
Additional small molecule screening in Brucella
Depending on their solubility characteristics, all ligands used in this study were freshly prepared in DMSO or sterile water. When needed, the pH was adjusted to 7.4. Caproic acid, ε-caprolactam, ε-caprolactone, ε-aminocaproic acid, glutaric acid, adipic acid, pimelic acid, suberic acid, sebacic acid, and tetradecanedioic acid were purchased from Sigma-Aldrich. Cis,cis and trans,trans muconic acids were purchased from Acros-Organics. Succinic acid was purchased from Fisher-Scientific. Malonic acid was purchased from MP-Biomedicals.
For β-galactosidase transcriptional activity measurements, B. abortus liquid cultures were prepared as follows: B. abortus strains carrying the different lacZ transcriptional fusions were harvested from fresh SBA plates supplemented with kanamycin (50 μg/ml) (strain information is available in Table S5). Cells were resuspended in 1 ml of BB and the corresponding OD600 was measured by spectrophotometry (Thermo Fisher Scientific Genesys 20). These B. abortus suspensions were used to inoculate (at OD600 = 0.1) culture tubes containing 2 ml of BB supplemented with kanamycin (50 μg/ml). These culture tubes also contained different concentrations of small molecules (from 50 μM to 4 mM). After overnight growth at 37°C and 220 rpm shaking, β-galactosidase activity was measured. Each condition was independently tested at least three times using different clones for each time.
Measurement of β-galactosidase activity
In this study, all β-galactosidase activity measurements were performed in 96-well plates, and the absorbance was measured using the Tecan Spark 20M or Infinite 200 PRO plate reader.
To assess regulation of reporter gene transcription by BaaR, the different B. abortus strains were grown on SBA plates supplemented with 50 μg/ml kanamycin. After incubation for 2-3 days at 37°C and 5% CO2, the cells were harvested and resuspended in 1 ml BB; 200 μl of each culture tube were transferred to a clear Corning flat-bottom 96-well plate, and the OD600 was measured using the Tecan plate reader. β-galactosidase activities of four different clones for each strain were independently measured at least twice. A representative data set is presented in Figure 6.
For ligand screening on 96-well plates, Phenotype MicroArray (Biolog) plates were prepared as described earlier, and the OD600 was measured using the Tecan plate reader. This initial screen was conducted once. For ligand screening in culture tubes, 200 μl each culture tube were transferred to a clear flat-bottom 96-well plate, and the OD600 was measured using the Tecan plate reader. In Figures 7 and 8, each condition was independently tested at least three times using different clones for each time.
For β-galactosidase activity measurements, between 2.5 and 10 μl cell suspension were mixed and lysed with 25 μl chloroform in a 96-well chloroform-resistant plate, and 125 μl Z-buffer (60 mM Na2HPO4, 40 mM NaH2PO4, 10 mM KCl, adjusted to pH 7) were then added to each well. After addition of 42 μl of a 4 mg/ml O-nitrophenyl-β-D-galactopyranoside solution to each well, the reaction was developed at room temperature and stopped by adding 83 μl of a 1 M sodium carbonate solution. For each reaction, the incubation time was recorded; 200 μl of each reaction were then transferred to a clear flat-bottom 96-well plate, and the OD420 was measured using the Tecan plate reader. Calculation of (β-galactosidase activity was performed using the following formula: where Abs420 is the absorbance measured at 420 nm of the β-galactosidase reaction, blankA is a blank reaction containing no cells, 0.25 is the total volume of the reaction (ml), Abs600 is the absorbance measured at 600 nm of the cell suspension, blankB is a blank containing Brucella broth alone, t is the incubation time (min), and v is the volume of cells used in the reaction (ml).
Oxidative stress assay
B. abortus WT, ΔbaaR, and ArpoEl strains (strain information is available in Table S5) grown on SBA plates for 48 hours were harvested and resuspended in Gerhardt’s Minimal Medium, pH 6.8 (GMM) (68). Each sample was then adjusted to a final cell density of 1 x 10 CFU/ml in 2 ml Gerhardt’s Minimal Medium (GMM), pH 6.8. The test group was subjected to oxidative stress by the addition of 5 mM H2O2 (final concentration); the control group was mock treated with sterile water. After 1 hour of incubation in a shaking incubator at 37°C, the cultures were serially diluted in PBS and plated on tryptic soy agar plates for viable CFU counting. Three independent cultures per condition were prepared for each strain.
Cell culture and macrophage infection assay
Human monocytic THP-1 cells were cultured in Roswell Park Memorial Institute (RPMI) 1640 medium supplemented with 10% heat-inactivated fetal bovine serum and 2 mM L-glutamine. Differentiation of the cells into inactivated macrophages was induced by the addition of 40 ng/ml phorbol 12-myristate 13-acetate (Sigma-Aldrich) for 48 hours at 37°C in a 5% CO2 atmosphere. Prior to infection, bacteria were harvested from freshly plated SBA plates, resuspended in sterile RPMI medium, and cell densities were adjusted. For infection assays, 5 × 10 THP-1 cells were infected with 5 × 10 cells of the WT or ΔbaaR B. abortus strains to achieve a multiplicity of infection (MOI) of 1:100 in 96-well plates. To synchronize the infections after the addition of the Brucella cells, the plates were centrifuged at 200 × g for 5 min. After 1 hour of incubation at 37°C in a 5% CO2 atmosphere, the medium was removed and replaced with RPMI medium supplemented with gentamicin (50 μg/ml) and incubated for 20 minutes at 37°C in a 5% CO2 atmosphere to kill extracellular bacteria. To determine the numbers of intracellular bacteria at 1, 24 and 48 hours post infection, the cells were washed once with PBS and lysed with 0.1 ml PBS complemented with 0.1% Triton X-100. The lysate was serially diluted and plated on tryptic soy agar plates for CFU counting. This infection experiment was performed in triplicate using two different clones of each strain.
Protein expression plasmids
DNA fragments corresponding to the full-length BaaR (residues 1-284) protein, the BaaR protein deleted for the first 8 (9-283), 20 (21-284), or 39 (40-284) N-terminal amino acids, and the BaaR LBD (115-284) were amplified by PCR using KOD Xtreme Hot start DNA polymerase (EMD Millipore). The primers used for cloning are listed in Table S4. After purification using the GeneJET PCR Purification Kit (Thermo Fisher Scientific), the PCR products were directly Gibson assembled (New England Biolabs) or digested with restriction enzymes (New England Biolabs) and ligated using T4 DNA ligase (New England Biolabs) into a linearized pET28a plasmid. Fragments corresponding to BaaR (residues 9-283) and BaaR (residues 21-284) were respectively cloned into pMCSG81 and pMCSG73 plasmids using a ligation-independent procedure (69,70). E. coli Top10 strains were then transformed with the different plasmids by electroporation, and transformants were selected on Luria Broth (LB, Fisher) agar plates supplemented with 50 μg/ml kanamycin. After PCR screening and sequencing, the corresponding plasmids were purified using the GeneJET Plasmid Miniprep Kit (Thermo Fisher Scientific) and transformed into E. coli BL21-Gold(DE3) or Rosetta(DE3)(pLysS) strains (Stratagene) for protein expression (see Table S5 for strain information).
Protein expression and purification
An overnight LB (Fisher) pre-culture (100 ml) was used to inoculate 1 L LB supplemented withtheappropriateantibiotics. Overexpression of the different His-tagged BaaR proteins was induced at an OD600 of ∼0.8 (37°C, 220 rpm) by adding 1 mM isopropylβ-D-1-thiogalactopyranoside (GoldBio). After 5 hours of induction, cells were harvested by centrifugation at 11000 × g for 20 minutes at 4°C. The cell pellets were resuspended in 20 ml of a buffer containing 10 mM Tris-HCl, pH 8.8, 150 mM NaCl and 10 mM imidazole and supplemented with 50 μl of a DNaseI solution at 5 mg/ml and one-half tablet of complete protease inhibitor cocktail (Roche). The cells were then disrupted by one passage in a microfluidizer (Microfluidics LV1). The resulting cell lysate was clarified by centrifugation at 39000 × g for 20 minutes at 4°C. Purification of the His-tagged proteins was performed by nickel affinity chromatography (nitrilotriacetic acid resin; GE Healthcare). After binding of the clarified lysate to the column, three washing steps were performed using 10 mM, 30 mM, and 75 mM imidazole Tris-NaCl buffers, followed by elution with 200 mM and 500 mM imidazole Tris-NaCl buffers. All purification steps were carried out at 4°C. Protein purity was assessed by running the eluate on a 14% SDS-PAGE gel and staining the gel with Coomassie blue. Proteins were then dialyzed overnight at 4°C against 2 L Tris-NaCl buffer (10 mM Tris pH 8.8, 150 mM NaCl, 1.5 mM EDTA). The protein concentrations were estimated using a colorimetric Bradford protein assay method kit (Thermo Fisher Scientific). Protein samples were concentrated using a centrifugal filter (3 kDa molecular mass cutoff, Amicon-Millipore). If necessary, protein aliquots were flash frozen in liquid nitrogen after addition of glycerol to a final concentration of 50%.
Electrophoretic mobility shift assay (EMSA)
For gel shift assays, fluorescent DNA probes corresponding to different portions of the WT bab2_0215-bab2_0216 intergenic region were PCR amplified using B. abortus chromosomal DNA as a template. Upstream primers positioned before BBS1 or BBS2 and a downstream fluorescent primer positioned at the beginning of the baaR gene were used to generate the “long” (375 or 289 nucleotides) and “short” (196 nucleotides) fluorescent DNA probes. The fluorescent primer (Integrated DNA Technology, IDT) was labeled with the Alexa Fluor 488 dye with an excitation wavelength of 492 nm and an emission wavelength of 517 nm. Using the same set of primers, a gBlocks DNA Fragment (Integrated DNA Technology, IDT) corresponding to the bab2_0215-bab2_0216 intergenic region carrying mutated BBSs was also used as a PCR template to introduce mutations in BBS1 and BBS2. The resulting PCR products corresponded to the long (375 nucleotides) or short (196 nucleotides) mutant fluorescent DNA probes. Mutations in BBS2 region 1, 2, or 3 were introduced using three different sets of overlapping primers containing BBS2 region 1, 2, or 3 mutations, respectively. The different fluorescent DNA probes were also used as templates to generate non-fluorescentDNAprobes (short/long/WT/mutated) using a non-fluorescent downstream primer during PCR amplification. Primer sequences and information regarding the gBlocks Gene Fragment are available in Table S5. The PCR products were run on a 1% agarose gel and gel purified using the GeneJET PCR Purification Kit (Thermo Fisher Scientific). DNA concentrations were measured using the Nanodrop One (Thermo Fisher Scientific).
All EMSAs were performed using a BaaR protein corresponding to residues 9-283. Two additional constructs (a full-length (residues 1-284) and a shorter (residues 40-284) BaaR protein) were also used to evaluate the importance of the BaaR N-terminal region. All gel shift assays were performed using previously published protocols (71,72). Briefly, 10 μl reactions were prepared as follows: each reaction consisted of a specific concentration of BaaR protein mixed with 5 ng of a fluorescent DNA probe and 1 μl of a 10× binding buffer (100 mM Tris pH 8.8, 10 mM EDTA, 100 mg bovine serum albumin, 20 mM CaCl2, 500 mM KCl, 1 mM dithiothreitol, 50% glycerol, 20 mM MgCl2). To control for interaction specificity, fluorescent or non-fluorescentDNAprobes (short/long/WT/mutated) were also added to the mix at defined concentrations. The effect of specific small molecules was evaluated by adding defined concentrations of each molecule to the mix. Protein dialysis buffer was used to bring the total volume to 10 μl. Samples were incubated in the dark at room temperature for at least 30 minutes and then loaded on a fresh 5% native acrylamide gel pre-run for 20 minutes in 1× Tris acetate EDTA buffer (40 mM Tris, 20 mM acetic acid, and 1 mM EDTA). After running the gel for 1 hour at 4°C/110 volts in the dark, the gels were imaged using the BioRad Chemidoc MP imaging system with a 3-minute exposure and the manufacturer’s parameters for Alexa Fluor 488 detection. Each specific condition was tested at least twice.
Isothermal Titration Calorimetry (ITC) ligand-binding assay
All samples (proteins and ligands) were degassed for 10 minutes prior to ITC measurements, and final dilutions were made using dialysis buffer (10 mM Tris, pH 8.8, 150 mM NaCl, and 1.5 mM EDTA). The ligands were injected into a 200 μl sample cell containing 50 μM purified BaaR LBD (residues 115-284) (protein expression strain information is available in Table S5). A 1 M adipic acid solution was prepared using the dialysis buffer and adjusted to pH 8.8. This same solution was then diluted to 10 mM using the same dialysis buffer. The ligand solution (1 μl) was injected into the cell every 2 minutes, with 20 injections total performed. Measurements were performed twice at 25°C using an iTC200 micro-calorimeter (MicroCal, GE Healthcare).
Protein expression and purification for crystallization
For crystallization, the E. coli strain carrying the pMCSG73 vector was used to overexpress BaaR (residues 21-284) (see strain information listed in Table S5). The pMCSG73 is a bacterial expression vector harboring a tobacco vein mottling virus-cleavable N-terminal NusA tag and a TEV-cleavable N-terminal 6x His and StrepII tag (70). A 2 liter culture of enriched M9 medium was grown at 37°C with shaking at 190 rpm. At OD600 ∼1, the culture was cooled to 4°C and supplemented with 90 mg L-seleno-L-methionine (Se-Met, Sigma-Aldrich) and 25 mg of each methionine biosynthetic inhibitory amino acid (L-valine, L-isoleucine, L-leucine, L-lysine, L-threonine, and L-phenylalanine). Protein expression was induced overnight at 18°C using 0.5 mM isopropyl β-D-1-thiogalactopyranoside. After centrifugation, cell pellets were resuspended in 35 ml lysis buffer (500 mM NaCl, 5% (v/v) glycerol, 50 mM HEPES pH 8.0, 20 mM imidazole, and 10 mM β-mercaptoethanol) per liter of culture and treated with lysozyme (1 mg/ml) and 3 ml E. coli cells expressing the tobacco vein mottling virus protease. The cell suspension was sonicated, and debris was removed by centrifugation. The Se-Met protein was purified via Ni2+-affinity chromatography using the AKTAxpress system (GE Health Systems). The column was washed with 20 mM imidazole (lysis buffer) and eluted in the same buffer containing 250 mM imidazole. Immediately after purification, the His-tag was cleaved at 4°C for 24-48 hours using a recombinant His-tagged TEV protease, resulting in an untagged protein with an N-terminal Ser-Asn-Ala peptide. A second Ni2+-affinity chromatography purification was performed to remove the protease, non-cleaved protein, and affinity tag. The purified protein was then dialyzed against 20 mM HEPES pH 8.0, 250 mM NaCl, and 2 mM dithiothreitol buffer. Protein concentrations were determined by UV absorption spectroscopy (280 nm) using the NanoDrop 1000 spectrophotometer (Thermo Fisher Scientific). The purified Se-Met BaaR protein was concentrated to 44 mg/ml using a centrifugal filter (10 kDa molecular weight cutoff, Amicon-Millipore).
Crystallization
Initial crystallization screening was carried out using the sitting-drop, vapor-diffusion technique in 96-well CrystalQuick plates (Greiner Bio-one). Trays were prepared using a Mosquito robot (TTP LabTech) and commercial crystallization kits (MCSG-1-4, Anatrace). The drops were prepared by mixing equal volumes (0.4 μl) of the purified protein (44 mg/ml) and the crystallization solution equilibrated against 135 μl of the same crystallization solution. After 1 week at 16°C, we obtained monoclinic crystals in condition #95 of the MSCG-4 screen corresponding to 200 mM calcium acetate, 100 mM HEPES pH 7.5, and 10% (w/v) PEG 8000. Prior to flash freezing in liquid nitrogen, crystals were washed for few seconds in the crystallization solution containing up to 12% ethylene glycol for cryoprotection.
Crystallographic data collection and data processing
Se-Met crystal diffraction was measured at a temperature of 100 K using a 2-second exposure per degree of oscillation. Crystals diffracted to a resolution of 1.95 Å and the corresponding diffraction images were collected on the ADSC Q315r detector with an x-ray wavelength near the selenium edge of 12.66 keV (0.97927 Å) for SAD phasing at the 19-ID beamline (SBC, Advanced Photon Source, Argonne, IL, USA). Diffraction data were processed using the HKL 3000 suite (73). The scaled amplitudes revealed that the crystal belonged to the P21 space group with the following cell dimensions: a=74.15 Å, b=112.46 Å, c=83.65 Å, β=115.86° (see Table S1).
The structure was determined by single wavelength anomalous dispersion (SAD) phasing using SHELX C/D/E, mlphare, and dm, and initial automatic protein model building with Buccaneer software, all implemented in the HKL3000 software package (73). The initial model was manually adjusted using COOT (74) and iteratively refined using COOT, PHENIX (75), and/or REFMAC (76); 5% of the total reflections were kept out of the refinement in both REFMAC and PHENIX. The final structure converged to an Rwork of 17.7% and Rfree of 21.2% and includes four protein chains (A: residues 21-284, B: 21-283, C: 21-284, D: 20-284) forming two dimers, one ethylene glycol molecule, seven acetate molecules, one calcium ion, and 315 ordered water molecules. The BaaR protein contained three N-terminal residues (Ser-Asn-Ala) that remain from the cleaved tag and were not visible in the structure. The stereochemistry of the structure was checked using PROCHECK (77) and the Ramachandran plot and was validated using the PDB validation server. Coordinates of BaaR have been deposited in the PDB (PDB ID: 5WHM). Crystallographic data and refined model statistics are presented in Table S1. Diffraction images have been uploaded to the SBGrid data server (Data DOI: 10.15785/SBGRID/491).
Palindromic motifs, protein sequence alignment, and structural homology
Palindromic motifs were identified using the Palindromic Sequence Finder server (http://www.biophp.org/minitools/find_palindromes/demo.php) and the Geneious software. Amino acid sequences were aligned using the M-COFFEE Multiple Sequence Alignment Server (78) and shaded using BoxShade. Figures of the structures, structura alignments, and RMSD calculations were performed using PyMOL (PyMOL Molecular Graphics System, version 1.7.4; Schrödinger, LLC). The XtalPred server (79) and Dali server (80) were used to identify proteins with the highest structural and sequence homologies. A structural model of Bab2_0282 based on the B. malei PBP structure (PDB ID: 3I09) was generated using the ExPASy SWISS-Model server (81).
Conflict of interest
The authors declare that they have no conflicts of interest with the contents of this article.
Author contribution
JH and SC conceptualized and designed the study. JH performed all the experiments, except the RNA-seq experiment, which was performed by DMC and the BaaR crystallization and x-ray structure determination, which was performed by YK and RW. Experiments in BSL3 were performed by JH with technical assistance of DMC, AF and JWW. JH and SC wrote the manuscript. JH, DMC, AF, JWW, YC, GB and SC reviewed and validated the results and approved the final version of the manuscript
Acknowledgements
We thank the members of the Crosson laboratory for helpful discussions and the members of the SBC at Argonne National Laboratory for their help with data collection at beamline 19-ID. This project was supported by federal funds from NIH-NIAID (grant numbers U19AI107792 and R01AI107159 to SC). JWW was supported by NIH Ruth Kirschstein Postdoctoral Fellowship F32GM109661.
References
- 1.↵
- 2.↵
- 3.↵
- 4.↵
- 5.↵
- 6.
- 7.↵
- 8.
- 9.↵
- 10.↵
- 11.↵
- 12.
- 13.↵
- 14.↵
- 15.↵
- 16.
- 17.↵
- 18.
- 19.
- 20.↵
- 21.↵
- 22.↵
- 23.↵
- 24.↵
- 25.
- 26.↵
- 27.↵
- 28.↵
- 29.↵
- 30.↵
- 31.
- 32.↵
- 33.↵
- 34.↵
- 35.↵
- 36.↵
- 37.↵
- 38.↵
- 39.↵
- 40.↵
- 41.↵
- 42.↵
- 43.↵
- 44.↵
- 45.↵
- 46.↵
- 47.↵
- 48.↵
- 49.↵
- 50.↵
- 51.↵
- 52.↵
- 53.↵
- 54.↵
- 55.↵
- 56.↵
- 57.↵
- 58.↵
- 59.↵
- 60.↵
- 61.↵
- 62.↵
- 63.↵
- 64.↵
- 65.↵
- 66.↵
- 67.↵
- 68.↵
- 69.↵
- 70.↵
- 71.↵
- 72.↵
- 73.↵
- 74.↵
- 75.↵
- 76.↵
- 77.↵
- 78.↵
- 79.↵
- 80.↵
- 81.↵