A simple additive function in a simple in vitro consortium

We sought to study a small synthetic consortium that could be combinatorially reconstituted in vitro and that performs a simple function that could be mechanistically and quantitatively understood from first principles when interactions among species are absent. To this end, we constructed a set of synthetic consortia consisting of every combination of six amylolytic soil bacteria: Bacillus subtilis, B. megaterium, B. mojavensis, Paenibacillus polymyxa, B. thuringiensis, and B. cereus (Fig 1A). As the function, we chose the starch hydrolysis rate of the enzymes released by the consortia (Fig 1B and 1C). This function was expressed on agar plates as well as in liquid culture (Fig 1A–1D) by all members of the consortia in isolation. This is a redundantly distributed, simple function that requires just one kind of extracellular enzyme (an endoamylase) for its completion.

Download:

• PPT
  PowerPoint slide
• PNG
  larger image
• TIFF
  original image

Fig 1. Starch degradation of simple consortia follows an additive null biochemical model.

(A-B) All members of our six-species consortium are able to break down extracellular starch by secreting extracellular amylases. This is evidenced by the presence of a halo around colonies of all six species after Lugol stain [52]. Colonies formed on basic growth minimal media (1x bSAM) agarose plates. Extracellular Bacillus amylases bind randomly on starch chains, breaking them at random positions [53]. We propose a two-step enzymatic degradation model (Methods) that requires two cleavage reactions to turn starch into smaller oligosaccharides. (C) We fit the model (Eq 9) to the result of incubating purified B. subtilis amylase at various concentrations (from 0.4 to 100 μg/mL in 2X increments) with a 1 mg/mL starch solution for various lengths of time. In the horizontal axis, we plot z = x⋅t, where x represents the dilution of the enzyme relative to the maximum concentration (see Methods), and t is the incubation time. In the vertical axis, we plot the fraction (“Fract.”) of starch degraded for each condition. Each red dot represents a measurement for a different value of (x, t). (D) Amylolytic activity of the supernatants of individual species in monoculture. Species were grown in monoculture in 3 mL of 1x bSAM medium at 30°C for 24 hr. The vertical axis represents the fraction of starch degraded by different dilutions (x = 0.05, 0.125, 0.25, 0.5) of the filtered supernatants incubated at 30°C with 1 mg/mL starch for various time lengths (t = 3, 6, 19, 24 hr). The two-step model (Eq 9; solid black line) is fit to the data (red dots), and the fitted parameter V_i (hr⁻¹), which corresponds to the function of the monocultures V_i⁰, is reported in red in each subpanel. (E) Amylolytic activity of 1:1 mixtures of all possible pairs of single-species filtered supernatants. In addition to experimental data (red points) and fit to Eq 9 (solid black line; fitting parameter V_ij), we also show the fraction of starch degraded for each value of z predicted by the null biochemical model of independently acting enzymes (Eq 11; mean ± 2SE, gray region). (F) Comparison of fitted versus predicted values of V_ij for the same pairs shown in (E) (error bars represent ± 2SE); red line represents perfect prediction. Vol., volume.

https://doi.org/10.1371/journal.pbio.3000550.g001

To formulate a quantitative null model for this function that is based on the underlying biochemistry, we adopted the random or “single-attack” model of enzymatic starch hydrolysis, which has been previously found to capture the mechanism of Bacillus endoamylases [53]. In the Methods section, we explain how we mathematically formulated this model and considered two alternative, minimal scenarios that are consistent with the concentration of low-molecular-weight soluble starch that we use as substrate and the operational definition of starch we use throughout the paper (Methods). As we will show in what follows (Fig 1E and 1F), the model also has a strong predictive power. As described in Methods, enzymatic starch hydrolysis is well captured under our experimental conditions by a sequential two-step Michaelis-Menten reaction with each step having an identical velocity (V) (Figs 1B and 1C and S1).

We now sought to apply this model to the extracellular enzymes from live cultures of the species in the consortium. The same two-step model in (Eq 9) also fits well the kinetics of starch degradation by the amylases released into the extracellular medium by each species in monoculture (Fig 1D), and the fitting parameter V_i gives us the hydrolysis rate of each species i. Moreover, as described in the Methods section, the theory of chemical kinetics predicts that the starch hydrolysis rate (V_AB) of a cocktail or mixture of the enzymes independently released by monocultures of species A and B is the sum of both rates in isolation (V_AB = V_A⁽⁰⁾ + V_B⁽⁰⁾). We tested this prediction by growing all six species in monoculture for 24 hr and then mixing their supernatants 1:1 in every possible pairwise combination (Fig 1E). A series of different volumes (representing enzyme dilutions x = 0.05, 0.125, 0.25, 0.5) of these supernatant mixtures were incubated at T = 30°C with a 1 mg/mL starch solution for various incubation times (3, 6, 19, and 24 hr), and the fraction of starch degraded at each time was then measured for each condition (Methods). A fit to the model in Eq 9 allowed us to obtain the degradation rate of the enzymatic cocktails (V_AB), which can be compared to the prediction from the model of independently acting enzymes (Fig 1E). We find a very strong correlation (Pearson’s ϱ = 0.973, P < 0.001; root-mean-square deviation [RMSD] = 0.41, N = 15) between the predictions from this naturally additive, interaction-free mechanistic model and the experimental measurements (Fig 1F). The strong predictive power of the two-step model further validates it under our experimental conditions.

In summary, the theory of chemical kinetics states that the rate of hydrolysis when two or more different enzymes are mixed together should be the sum of the hydrolytic rate of each enzyme, if those enzymes act independently on the substrate. This prediction is validated in our experiments. When the species in our consortia are grown in separate culture tubes and do not interact with one another in any way, their contributions to the rate of starch degradation add up. Armed with this mechanistic null model, we are now prepared to investigate the role of pairwise and higher-order functional interactions.

Mapping pairwise functional interactions in our microbial consortium

To investigate the contribution of pairwise and higher-order interactions to the function of our consortia, we made use of concepts and tools that were originally developed for the study of genetic interactions. By analogy with the theory of fitness landscapes, we define the functional landscape as a map connecting every possible combinatorially assembled consortia with its function (which, in the case at hand, represents the amylolytic rate of the cocktail of enzymes collectively secreted by a consortium).

In the absence of interactions, growing species together would be identical to growing them separately in their own culture flask. In such scenario, the null mechanistic model described above predicts that the functional landscape should be additive, and the function of a consortium would grow monotonically with the number of species (Fig 2A). For an M-species consortium (which we denote as ), our null model is given by Eq 11 (Methods) and can be written as: where denotes the function of the consortium, and V_i⁽⁰⁾ represents the amylolytic rate of the enzymes released by species i in monoculture.

Download:

• PPT
  PowerPoint slide
• PNG
  larger image
• TIFF
  original image

Fig 2. Pairwise interactions are ubiquitous in our microbial consortia.

(A) Functional landscape predicted by the additive biochemical model (Eq 11). (B) Experimental functional landscape, where each point is the experimentally measured amylolytic rate of a consortium (error bars omitted for clarity). (C) Example of a pairwise functional landscape that is representative of communities lacking P. polymyxa (in this case, B. mojavensis and B. thuringiensis). Red lines show experimental measures (±SE), which are well predicted by the additive model (gray). (D) Functional landscape for a pairwise consortium containing P. polymyxa and B. thuringiensis. Here, the experimentally measured function of the pair (red) is not well predicted by the sum of the individual contributions (gray). The difference quantifies the pairwise interaction. (E) Pairwise interactions () of all possible two-member species consortia. (F) Comparison of the measured community function and the function predicted by the additive model (±2SE). Shape and color represent community size and presence of P. polymyxa, respectively. Black line represents perfect prediction. Species are designated as follows: C = B. cereus; E = B. megaterium; M = B. mojavensis; P = P. polymyxa; S = B. subtilis; and T = B. thuringiensis. This convention will be used throughout the text.

https://doi.org/10.1371/journal.pbio.3000550.g002

To test the null model, we assembled combinatorial consortia including pairs and trios as well as four-, five-, and six-member species and measured the amylolytic rates of the enzymes released over 24 hr of culture (Methods). For internal consistency, we also replicated the monocultures, obtaining good agreement with the measurements in Figs 1 and S1B. Overall, the experimental functional landscape often exhibits a marked deviation from the prediction of the null model (Fig 2B), indicating the presence of interactions in many—but not all—consortia. For instance, we show the functional landscape for two different two-species consortia: one formed by B. thuringiensis (“T”) and B. mojavensis (“M”) (Fig 2C) and a second one formed by B. thuringiensis and P. polymyxa (“P”) (Fig 2D). As we see in Fig 2C, the null model approximates well the function of the pairwise consortium formed by B. thuringiensis and B. mojavensis. In contrast, the null model underestimates the function of the consortium formed by B. thuringiensis and P. polymyxa (Fig 2D). The deviation between the null model prediction and the measured function of the consortium quantifies the pairwise functional interaction, which we denote as ε_PT⁽⁰⁾ (i.e., V_PT⁽⁰⁾ = V_P⁽⁰⁾ + V_T⁽⁰⁾ + ε_PT⁽⁰⁾) (Fig 2D).

The strength of pairwise functional interactions can be determined in the same manner for other pairs of species too (Fig 2E). A pattern readily emerges: interactions are strong when P. polymyxa is present but weak when it is absent. Consistent with this finding, the predicted function from the additive null model is strongly predictive of the measured function (RMSD = 1.47, N = 25) for all of the consortia we tested (including all of those with M > 2 species), where P. polymyxa is absent (Fig 2F, blue dots). On the other hand, when P. polymyxa is present, the additive null model is weakly predictive (Fig 2F, RMSD = 17.36, N = 28), severely underestimating the amylolytic function of all consortia. Given the failure of the null model, we conclude that pairwise and potentially also higher-order functional interactions are required to explain the function of consortia when P. polymyxa is present.

Quantifying high-order functional interactions in our simple consortia

Third-order interactions capture how the function of a pair of species (e.g., the amylolytic rate of the enzymes secreted by the pair) is altered when a third species is present. To determine whether pairwise interactions can indeed be altered by the presence of a third species, we measured the amylolytic rate for every possible pairwise and three-member consortia and then followed the approach outlined in Fig 3A. The results are summarized in Fig 3B, and they show that a model that adds up all single-species contributions and all pairwise interactions vastly overestimates the amylolytic function of our consortia when P. polymyxa is present. An example is given in Fig 3C, which shows a three-member community formed by P. polymyxa (“P”), B. subtilis (“S”), and B. mojavensis (“M”). None of the three species have a strong amylolytic activity in monoculture (Fig 1D), but the two pairs that include P. polymyxa have high amylolytic rates, driven by strong pairwise interactions (Fig 3C). However, as shown in Fig 3C, the trio has much lower function (V_PSM⁰ = 24.2 ± 1.6 hr⁻¹) than would be expected by adding together the single-species contributions and every possible pairwise interaction (53.2 ± 3.3 hr⁻¹). The same finding extends to other trios, and we find that third-order interactions generally exhibit a strong negative correlation with the sum of all pairwise interactions (Pearson’s ϱ = −0.95, P < 10⁻¹⁰; Fig 3D). By comparison, the correlation with first-order interactions is much weaker (ϱ = −0.29, P = 0.04; S2 Fig), suggesting that pairwise interactions do not add up as one may predict based on the functional landscape model in Fig 3A. Rather, the result in Fig 3D shows that pairwise interactions combine subadditively.

Download:

• PPT
  PowerPoint slide
• PNG
  larger image
• TIFF
  original image

Fig 3. Higher-order interactions in simple amylolytic consortia.

(A) Box explaining how single, pairwise, and higher-order interactions in the function of microbial consortia can be separated and quantified using ecological functional landscapes. (B) Third-order interactions Δε_ABC(±SE), defined as the difference in the functional interaction () when a pair “AC” is grown alone and in the presence of a third species “B” (), whose identity is shown in the horizontal axis. Species are designated as C, B. cereus; E, B. megaterium; M, B. mojavensis; P, P. polymyxa; S, B. subtilis; and T, B. thuringiensis. (C) Community function V (±SE) for every combinatorial consortia of P. polymyxa (“P”), B. mojavensis (“M”), and B. subtilis (“S”). In gray, we show the function predicted by adding the functions of all three taxa in isolation and all pairwise interactions (rather than, for instance, by averaging out the pairwise interactions). (D) Third-order interactions (±SE) are strongly anticorrelated (Pearson’s ρ = −0.95, P < 0.001) with the sum of all pairwise interactions (±SE in hr⁻¹).

https://doi.org/10.1371/journal.pbio.3000550.g003

In principle, interactions that affect the function of a consortium could be caused by any combination of (1) synergy or antagonism between the contributions of individual members to the net function of the consortium; (2) ecological competition (facilitation), which decreases (increases) the population size of community members relative to their monocultures (potentially altering the amount of function contributed by each population); or (3) an increase or decrease in the per-cell contribution to the net function of the consortium when other species are present (S3 Fig). The success of our null biochemical model for all enzymes rules out the possibility of (1) biochemical synergy involving the enzymes released by P. polymyxa. In the following sections, we will proceed to examine whether (2) facilitation or (3) stimulation of amylase expression could explain the higher-than-expected function of consortia containing P. polymyxa.

Facilitation qualitatively explains the enhanced function of consortia containing P. polymyxa

Given that P. polymyxa grows poorly in our medium, we hypothesize that the positive pairwise interactions between every other community member and P. polymyxa may arise as a result of facilitation toward P. polymyxa (Fig 4A). To test this hypothesis, we determined the number of colony forming units (CFUs) of P. polymyxa in monoculture as well as in coculture with each of the other members of the consortium. Consistent with our hypothesis, we find that P. polymyxa is facilitated by every other member of the consortium (Fig 4B), but their facilitative effects are redundant: coculturing P. polymyxa with two or more members of the consortium produces a similar growth stimulation than that observed in coculture with just one other member (Fig 4C).

Download:

• PPT
  PowerPoint slide
• PNG
  larger image
• TIFF
  original image

Fig 4. Redundancy in the ecological facilitation of P. polymyxa explains higher-order interactions.

(A) If growth of P. polymyxa is facilitated by any and all of the other species, this facilitation may be redundant. Species are designated as C, B. cereus; E, B. megaterium; M; B. mojavensis; P, P. polymyxa; S, B. subtilis; and T, B. thuringiensis. (B) P. polymyxa grows in the presence of any of the other species (gray bars) but not in monoculture (orange bar). CFUs were determined by colony counting of serially diluted cultures after 48 hr of growth at 30°C. Error bars represent ±SE. (C) P. polymyxa grows to a comparable density as a part of a pair, trios, or higher numbers of other species in the consortium. This strongly suggests redundancy in the facilitation mechanism. (D) P. polymyxa growth (quantified by the final OD₆₂₀ after 24 hr of culture, initialized at OD₆₂₀ = 0; mean ± difference of two independent biological replicates) in our growth media supplemented with a 1:10 dilution of the filtered supernatant of each of the other species (Methods). (E) Function (V_P⁽⁰⁾) of P. polymyxa monocultures shown in (D) (mean ± difference of two independent biological replicates). CFU, colony forming unit; OD, optical density at 620 nm.

https://doi.org/10.1371/journal.pbio.3000550.g004

Growth stimulation is also observed when P. polymyxa is grown in media supplemented with the filtered supernatant of every other species in monoculture (with the exception of B. megaterium and B. cereus, Fig 4D). This ecological facilitation also results in a marked increase in the amylolytic activity of P. polymyxa (Fig 4E). To ensure that this increase in amylolytic activity is not due to the activity of extracellular amylases carried over in the Bacillus spent media, we filtered these a second time through a 30-KDa filter membrane (Methods), which blocks the passage of amylases (molecular weight [MW] > 50 KDa). The filtrate through the second 30-KDa filter exhibited no amylolytic activity (S4 Fig), demonstrating that amylases are not present in it. Despite the lack of growth stimulation by the supernatants of B. megaterium and B. cereus monocultures, growth of P. polymyxa is strongly facilitated by either of them (Fig 4B).

Altogether, these results suggest that cross-feeding facilitation stimulates the growth of the P. polymyxa population, which in turn leads to a larger amount of amylase secreted (Fig 4E). We also find that all of the Bacillus species in our consortia are able to facilitate the growth of P. polymyxa in pairwise coculture with it, supporting our hypothesis that this facilitation is redundant: any combination of the Bacillus species stimulates the growth of P. polymyxa about as much as any of these species do separately (Figs 4C and S5). This is overall consistent with the finding reported in Fig 3C, that the positive effect of adding additional species to a P. polymyxa consortium qualitatively saturates after the first partner is added. These results prompt the question of whether ecological facilitation alone is sufficient to quantitatively explain the observed interactions in our consortia. If that were the case, then by including population growth into our null model, we could then predict the amylolytic function of P. polymyxa consortia.

Including population dynamics into a null model of the structure-function landscape

To address this question, we follow the same strategy we used before and formulate a new additive null model that explicitly incorporates population growth while assuming that no other interactions exist (S3 Fig). Any systematic deviations from this new null model will reveal additional interactions—for instance, those that modulate the amount of amylase expressed per cell. To formulate this new null model, we must determine how the amount of amylase produced by a species (which is proportional to V_i) depends on how much its population (N_i) grows over the incubation time T (i.e., ΔN_i = N_i(T) − N_i(0)). In our experiments N_i(T) >> N_i(0), so the population growth is approximately equal to the population size at the time of harvest (ΔN_i ≈ N_i(T), which for simplicity of notation we denote as n_i). Once we have determined how V_i depends on n_i for each of the M species (which we will hereafter denote as V_i(n_i)), our additive null model now incorporates population growth and takes the form:

The key is then to determine the functions V_i(n_i). As a first ansatz, we considered a simple model in which the amylolytic function of each species is assumed to be proportional to its population size at the time of harvest, i.e., where λ_i reflects the average amount of amylase produced per cell (Methods). Beyond being the simplest [54] (Holling type I) functional response, the proportionality between amylolytic function and population growth arises naturally in a minimal mathematical model that assumes constitutive expression of the amylase gene and exponential population growth (Methods). Given this first ansatz, our new null model for the function of a consortium would take the form . To construct this model, we reexamined all of the mixed-species consortia in Fig 2 and determined n_i for all species by plating methods (Methods). To estimate λ_i, we simply divided the amylolytic rate of each monoculture by the final number of cells n_i at the time of harvest (T = 24 hr; Methods).

The population growth for all species is generally different in mixed culture than in monoculture (S5 Fig). Yet, the null "presence/absence" (P/A) model that we introduced in Fig 2 (which ignored the effect of population growth) predicts function better than the revised null model (which assumes that amylolytic activity is proportional to the population size). This is true regardless of whether P. polymyxa is absent (Fig 5A, RMSD = 12.34 versus 1.47 [inset]; N = 25) or present (Fig 5B, RMSD = 10,689.5 versus 17.36 [inset]; N = 28). We reasoned that this could be explained if the amount of amylase produced by a population saturates and becomes insensitive to population size past a certain population threshold. To capture this hypothesis, we propose a new ansatz in which the amount of amylase produced by species i over an incubation time T (and thus the enzymatic rate V_i) is a generic Holling type II saturating function of its final population size: Here, K_i represents the threshold population size for species i, and u_i represents the maximum amylolytic rate of species i, which reflects the amount of amylase secreted when n_i is much higher than K_i. As we show in the Methods section, a minimal generic model of amylase expression under negative-feedback regulation naturally exhibits a saturating dependence between V_i and n_i (S6 Fig). Encouragingly, amylase expression in multiple Bacillus species (as well as in P. polymyxa) [55,56] is under negative-feedback regulation, inhibited through catabolite repression by the byproducts of its enzymatic action over starch. A similar form of a feedback loop has also been reported for other extracellular enzymes [39,57].

Download:

• PPT
  PowerPoint slide
• PNG
  larger image
• TIFF
  original image

Fig 5. Including population dynamics into a null model of the structure-function landscape.

(A-B) We compare the predictive ability of the P/A null model (insets; data replotted from Fig 3F), with the revised null model that assumes that species contribution to function is proportional to their population size. For clarity, we separate consortia where P. polymyxa is absent (A) from those where it is present (B). Note the log-log scale used here for easier interpretation of the data. Red dashed line represents the identity curve where the null model perfectly predicts the function of the consortia. (C) To test whether the relation between final population size and function in P. polymyxa is well approximated by a saturating function, we grew P. polymyxa in media supplemented with different amounts of spent media from each of the other taxa. We determined the final population size in CFU/mL and the amylolytic function V (Methods, example in inset). The data were fitted using the saturating function (dashed line); 95% confidence interval (gray shading). (D) Comparison of the measured community function and the function predicted by the model assuming that function saturates with population size, for consortia where P. polymyxa is absent, and (E) for consortia in which P. polymyxa is present. All points shown ±SE. In (A), (B), (D), and (E), red dashed line represents perfect prediction. CFU, colony forming unit; Cond. supernat., Conditioning species supernatant; P/A, presence/absence.

https://doi.org/10.1371/journal.pbio.3000550.g005

To test the validity of this ansatz, we measured the growth and amylolytic activity of P. polymyxa monocultures supplemented by different dilutions (ranging from 1:10 to 1:40) of spent media from each Bacillus species in monoculture (Methods). Projecting the measured V_P and n_P for all of these experiments on the same plot, we find that, to a good approximation, the amount of amylase produced by P. polymyxa in monoculture is well predicted by its final population size and it is well fitted by the generic “type II” saturating function introduced above (Fig 5C; Methods). Encouraged by this result, we repeated the experiment for all other members of the consortia to see whether their function also saturates with population growth (S7 Fig). The results were again consistent with the saturating model. By fitting the type II Holling function to the data (Methods; S7 Fig), we estimated the asymptotic amylolytic function u_i and the threshold population size K_i for each species. Armed with these fits, we propose a new additive null model for the function of an M-species consortium: This model assumes, as before, that the enzymes released by each species act additively on the starch substrate and that the amount of amylase secreted by each species is deterministically governed by the number of cells in the population. Interactions exclusively affecting population dynamics will increase or decrease n_i (but not u_i or K_i), so their effect on the overall function is implicitly captured by the null model above, if no other interactions exist.

Saturating effects of population growth explain the success of the original P/A null model

The observed insensitivity of amylolytic function to competitive interactions among the Bacillus strains could be explained if their population sizes were generally higher than the threshold K_i. To test whether this is true, we compared the final population size of all species with their respective population thresholds K_i. We found that in virtually all cases, n_i > K_i (S8 and S9 Figs). This means that, at the population densities reached by the members of our consortia, the contribution of each species to the total amylase pool becomes insensitive to the final population size. In this limit, we can approximate our revised null model as . For consortia lacking P. polymyxa u_i ≈ V_i⁽⁰⁾ (S9 Fig), so the revised null model that includes the effect of population size converges to our initial P/A null model ( (S10 Fig, Pearson ϱ = 0.88, P < 10⁻⁷, RMSD = 2.21; N = 25). This explains why our initial P/A null model, which ignored population growth, predicts so well the amylolytic function of microbial consortia despite the strong competitive interactions among them (S5 and S9 Figs).

Using the values of u_i and K_i estimated from the fits in Figs 5C and S7, we calculate the predicted function for our multispecies consortia using the new null model (Fig 5D and 5E). As before, the null model is strongly predictive of function in consortia that lack P. polymyxa (RMSD = 2.98, Fig 5D). Yet, it still systematically overestimates the function of those that include it (RMSD = 31.1, Fig 5E and 5F). This suggests that interactions between P. polymyxa and the other members of the consortia do more than simply altering the population growth of P. polymyxa: they also generally lower the per-cell production of amylase (Methods).

Redefining pairwise and HOIs from an additive null model that includes population dynamics

We started this section by asking whether the higher-than-expected function of consortia containing P. polymyxa is caused by facilitation (a population dynamics interaction) or stimulation of amylase expression (a behavioral interaction). Can we quantitatively separate the effect of both types of interactions? In the Methods section, we mathematically demonstrate that the pairwise interactions () that we had determined in Fig 2E as deviations from the original P/A null model can be partitioned as the sum of two separate terms. One of these terms captures the mutual effect that both species have on their respective population dynamics (). The second term quantifies the change of amylase expression in coculture relative to monoculture (i.e., a behavioral interaction term ) (Methods; S11 Fig).

We applied this analysis to our pairwise communities containing P. polymyxa (Fig 6A). We find that facilitation interactions are higher than the net interaction and that the effect of facilitation is partially compensated by inhibition (rather than stimulation) of amylase expression in coculture. Our experimental methods do not allow us to distinguish the amylases contributed from each species in isolation. However, using the fact that amylolytic rates cannot be negative, we can unambiguously determine that P. polymyxa expresses less amylase in coculture than it does in monoculture. A quantitative estimation of the upper and lower bound of the inhibition of amylase production by P. polymyxa in mixed culture is shown in S11 Fig.

Download:

• PPT
  PowerPoint slide
• PNG
  larger image
• TIFF
  original image

Fig 6. Quantifying the population (“Pop.”) dynamics and behavioral (“Behav.”) components of both pairwise and high-order interactions.

(A) Pairwise interactions (±SE) for all two-species consortia. We separate pairs by whether they include (orange) or do not include (blue) P. polymyxa. (B) Higher-order interactions in communities with three or more members. Similar to (A), we differentially color consortia by whether they include (orange) or lack (blue) P. polymyxa. Jitter in the horizontal axis (which is categorical) was added to the data for clarity of presentation.

https://doi.org/10.1371/journal.pbio.3000550.g006

A similar logic was applied to the net effect of HOIs. We show in the Methods section that these also can be partitioned as the sum of population dynamics interactions and behavioral interactions. We quantified both contributions (Methods) and plot them in Fig 6B. We find that both behavioral and population dynamics interactions contribute to the HOIs, and their magnitudes are similar though of different sign. We conclude that accounting for population dynamics into the null model does not eliminate the effect of HOIs in distorting the functional landscape. We then asked whether a similar compensation could be masking the presence of population dynamics or behavioral interactions in consortia lacking P. polymyxa. As shown in Fig 6A and 6B, and consistent with our previous conclusions, we find that neither population dynamics nor behavioral interactions are significant for species other than P. polymyxa.

Strains and media

Bacterial strains were obtained from ATCC (Manassas, VA, USA) with the following designations: B. subtilis (ATCC 23857), B. megaterium (ATCC 14581), B. mojavensis (ATCC 51516), P. polymyxa (ATCC 842), and B. thuringiensis (ATCC 10792). B. cereus was isolated from a soil sample in Boston, MA, USA, and identified by 16S Sanger sequencing. To select these species, we screened a larger number of 20 strains of soil bacteria (all from ATCC) that had been reported to be amylolytic. We chose two criteria to include a strain in the consortium: (1) that they must be able to grow in our medium; (2) that they form a halo on agarose plates supplemented with our growth medium after exposure to iodine (indicating that they do secrete amylases under our growth conditions). We discarded B. circulans, B. clausii, B. firmus, B. halodurans, B. lentus, B. pumilus, and P. alvei for their failure in one or the other of these criteria. We also discarded B. amyloliquefaciens because its amylolytic activity was so strong that it masked the effects of all other species making their effects undetectable in practice. We discarded B. niacini, B. simplex, Cellulomonas biazotea, B. mycoides, and B. licheniformis for reasons related to their colony morphology and their growth on plates, which made it difficult to work with them. Cell stocks were prepared according to manufacturer instructions and stored at −80°C in 40% glycerol. Basic growth minimal media (1× bSAM) was prepared from 10x concentrated stocks of bM9 Salts containing Na₂HPO₄×2H₂O (85.4 g/L; Bioworld), KH₂PO₄ (30 g/L; Fisher Scientific), NaCl (5 g/L; Sigma-Aldrich), NH₄Cl (10 g/L; Fisher Scientific), supplemented with 0.04% synthetic complete amino acids (w/v; Sunrise Science Products), 0.1% starch (w/v; soluble, Sigma-Aldrich), 1% trace mineral supplement (v/v; ATCC MD-TMS containing EDTA, 0.5 g/L; MgSO₄∙7H₂O, 3.0 g/L; MnSO₄∙H₂O, 0.5 g/L; NaCl, 1.0 g/L; FeSO₄∙7H₂O, 0.1 g/L; Co[NO₃]₂∙6H₂O, 0.1 g/L; CaCl₂ [anhydrous], 0.1 g/L; ZnSO₄∙7H₂O, 0.1 g/L; CuSO₄∙5H₂O, 0.010 g/L; AlK[SO₄]₂ [anhydrous], 0.010 g/L; H₃BO₃, 0.010 g/L; Na₂MoO₄∙2H₂O, 0.010 g/L; Na₂SeO₃ [anhydrous], 0.001 g/L; Na₂WO₄∙2H₂O, 0.010 g/L; NiCl₂∙6H₂O, 0.020 g/L), CaCl₂ (0.1 mM; Sigma-Aldrich), and MgSO₄ (2 mM; Fisher Scientific). Starch assay media (2x SAM) consisted of 2x bM9 salts, supplemented with 0.1% starch (w/v), CaCl₂ (0.2 mM), and MgSO₄ (4 mM). To confirm the previously reported biotin auxotrophy of our strain of P. polymyxa [66], we supplemented our medium with 1% vitamin supplement (v/v; ATCC MD-VS, which contains folic acid 2.0 mg/L; pyridoxine hydrochloride 10.0 mg/L; riboflavin 5.0 mg/L; biotin 2.0 mg/L; thiamine 5.0 mg/L; nicotinic acid 5.0 mg/L; calcium pantothenate 5.0 mg/L; vitamin B12 0.1 mg/L; p-aminobenzoic acid 5.0 mg/L; thioctic acid 5.0 mg/L; monopotassium phosphate 900.0 mg/L).

Culture inoculation and combinatorial assembly

Strains were streaked out on BE Starch Agar (0.3% beef extract, 1% starch) plates and grown for 24 hr at 30°C. Seed cultures were started from several colonies (depending on colony size), inoculated into 3 mL 1x bSAM and grown without shaking at 30°C for 24 hr. Cultures were then transferred to a 96-well plate (Corning Cat. No. 3596), and the optical density (620 nm) of 100 μL was measured (Multiskan Spectrophotometer; Fisher Scientific). Cells were harvested by centrifugation at 3,500 rpm for 15 min, washed twice with 1x phosphate buffered saline, and suspended in fresh 1x bSAM media at a concentration of 5 × 10⁵ CFU/μL. Monocultures or combinatorially assembled communities of the six bacilli species were prepared by inoculating 2 μL from each seed culture into 96-deep-well plates (VWR) containing 500 μL of 1x bSAM, regardless of the number of species. The initial density of cells in the six-member consortia was therefore six times higher than in monocultures. Plates were covered with Aerogel film (VWR) and incubated without shaking at 30°C for another 24 hr. Optical density (620 nm) of the grown cultures was measured as above at the end of the new incubation period.

Determination of amylolytic rates

Starch hydrolysis assays followed the quantitative Lugol iodine staining method described in [78], which is an adaptation of the classic Fuwa method [52]. Lugol staining solution was prepared with 390 mL water: 60 mL Lugol iodine stain (Sigma-Aldrich). Supernatants containing extracellular amylases were prepared for enzymatic assays by applying 330 μL of homogeneously suspended bacterial cultures grown for 24 hr directly to a 96-well 0.2-μm Acroprep filter plate (Pall, Cat. No. 8019) fitted to a 96-well collection plate (Corning, Cat. No. 3596) with a metal collar adaptor (Pall, Cat. No. 5225) and centrifuged for 20 min at 1,500g in a tabletop centrifuge (Eppendorf 5810).

Assays, in 96-well plates, contained varying volumes of filtered supernatant (100, 50, 25, 10, and 5 μL), 100 μL 2x SAM, and water to a total reaction volume of 200 μL. Control reaction plates were also prepared for either no enzyme (100 μL 2x SAM and 100 μL water) or no starch with supernatant (100 μL water and 100 μL supernatant). Reactions, assembled with prewarmed SAM, were incubated at 30°C to the desired time point and quenched by transferring 50 μL to a solution containing Lugol iodine stain (130 μL water and 20 μL Lugol per well). The resulting solution was homogenized by pipetting and immediately transferred to a plate reader to quantify starch concentration by measuring the optical density at 690 nm. The amount of starch remaining in the medium is calculated as described in [78], as f_sta = 1 − (OD₆₉₀(t)/OD₆₉₀(0)). All reactions with no detectable starch degradation were set to f_sta = 0.

Michaelis-Menten kinetic model of enzymatic starch hydrolysis

We adopt an operational definition of starch as a polysaccharide long enough to give a positive signal in a colorimetric iodine test [52]. To model how the fraction of starch remaining in solution (f_sta) depends on the time of incubation t and the enzyme concentration [E], we examine two simple kinetic models of enzymatic starch hydrolysis. First, we assume that amylase enzymes bind starch at random positions on the linear chain (e.g., the single-attack model [53]) and cut it into two smaller oligosaccharides, none of which are large enough to bind iodine. This single-step enzymatic hydrolysis reaction can be modeled by Michaelis-Menten kinetics, which gives us the classic equation of enzyme catalyzed substrate elimination: (1)

The general solution of this differential equation is: (2) where W[.] denotes the Lambert function [79,80]. The second model we propose, which we illustrate in Fig 1B, captures the scenario of a longer starch chain, which requires two successive, random-attack enzymatic hydrolysis reactions to be converted into iodine-negative oligosaccharides.

We make the further simplifying assumption that the length of the starch molecule does not substantially affect the catalytic rate of the amylase enzyme, so that both K_M and k_cat are the same for both short and long starch chains. This is justified in that the total number of sites where an endoamylase may cut is approximately the same in both a single long and two shorter starch chains (both differ by just one binding site, so for a sufficiently long chain the difference between the two is negligible). This assumption would fail to capture certain alternative mechanisms, such as the “multiple attack” model [53]. However, as we shall see, the model ensuing from this assumption provides an excellent fit to the data (Fig 1C and 1D) and has a very strong predictive power (Fig 1E and 1F), suggesting that it captures reasonably well the mechanism of enzymatic starch hydrolysis in our experiments, at least at this coarse-grained level. The model takes the form: (3) (4) where [S]_long and [S]_short are the concentrations of long and short chains of starch, respectively. The full solution to this model is cumbersome [80]. However, previous characterization of K_M for various Bacillus-secreted amylases acting on nonsoluble starch are in the range of approximately 2–15 mg/mL [81–84], whereas the initial starch concentration in our experiments is 1 mg/mL. Therefore, during our incubation reactions, the starch concentration [S] will be generally lower than the expected K_M. Taking the limit [S] << K_M (where [S] = [S]_long + [S]_short), the system of differential equations above takes the simpler form: (5) (6)

The concentration of starch as a function of time can be readily found by solving this system of equations using standard techniques of calculus and then adding the two solutions to obtain [S(t)] = [S(t)]_long + [S(t)]_short: (7) In our experiments, the two parameters we can externally control are the incubation time (t) and the concentration of enzyme ([E]) added to the starch solution. We note, as we do in the text, that both of these always appear multiplying one another in all of the models presented above. Therefore, the natural variable that governs the amount of starch degraded is the product of [E] and t. For convenience, we can define the parameter x = ([E]/[E₀]), which represents the enzyme dilution (relative to the reference stock concentration [E₀]) and the maximum reaction velocity V = k_cat [E₀]/K_M. Defining the variable z = x⋅t, the fraction of starch hydrolyzed, after a time t, by a dilution x from an enzyme of velocity V at stock concentration [E₀] can thus be written as: (8) for the one-step Michaelis-Menten model and as (9)

for the two-step model described above, where the single fitting parameter is V = k_cat [E₀]/K_M. The two scenarios (captured by Eqs 8 and 9, respectively) differed in whether one or two sequential cleavage steps are required to break down a starch polymer into smaller oligosaccharides that are too short to cause a colorimetric signal in an iodine test [53]. In both scenarios, we model each enzymatic cleavage reaction by Michaelis-Menten kinetics using parameters k_cat (the catalytic rate per enzyme) and K_M (the Menten constant). In the two-step model (Fig 1B), we also made the approximation that both steps had equal rates (V = k_cat[E₀]/K_M) and that the starch concentration [S] was much smaller than K_M. This approximation reflects our experimental conditions. For both models, we calculated the fraction of starch degraded (f_sta) by an enzyme of concentration [E₀] diluted by a factor x and incubated with a starch concentration [S(0)] for a period of time t. Although both models exhibit a similar qualitative sigmoidal shape, both predict different quantitative dependencies between f_sta and the product of x and t, which we denote as z. Therefore, both models can be discriminated on a quantitative basis.

To test the performance of these two models, we fitted them to the results of a starch hydrolysis experiment, in which we incubated commercially available, purified B. subtilis amylase (Sigma-Aldrich, Cat. No. 10070-10G) at various concentrations (from 0.4 to 100 μg/mL in 2X increments) with a 1 mg/mL soluble starch solution (prepared as explained in the previous section) and incubated for various times (0, 10, 20, 30, 60, 120, 240 min) at T = 30°C. Both models were fitted using the NonLinearModelFit function in Mathematica (Wolfram). The two-step model fits the data better (Akaike information criterion [AIC] = −262.5, versus AIC = −238.8 for the one-step model) despite having just one fitting parameter (V = k_cat[E₀]/K_M) as opposed to two (k_cat, K_M), as can be also readily seen by visual inspection of both the fit (Fig 1B) and the residuals (S1 Fig). All other fits to kinetic data were performed using the nls function in R.

To extend this model to cocktails of multiple enzymes, we resort to the theory of chemical kinetics, which predicts that when a reaction can occur independently through multiple parallel channels, the overall rate of the reaction is the sum of the rates for each of the independent channels [85,86]. In our model, each of the two reaction steps can be catalyzed by the m types of enzymes in the cocktail. Since all enzymes break down starch independently from each other, the velocity of each step when enzymes from m different monocultures are mixed is given by: (10) where V_j⁽⁰⁾ = (k_cat^j/K_M^j)[E₀]_j represents the velocity of the reaction catalyzed by the enzymes released by species j after 24 hr of growth in monoculture. The null biochemical model in the text is therefore given by Eq 10. Entering the first equality in Eq 10 into Eq 9, we can calculate the fraction of starch degraded by a cocktail of enzymes j = 1, … n_s as: (11)

Eq 11 gives us the fraction of starch degraded over a time t by a cocktail of enzymes of velocities V_j⁽⁰⁾ that act independently on the substrate and whose catalytic rates are not affected by each other’s presence. It is important to emphasize that when multiple species are grown in coculture, Eq 11 does not necessarily apply, since ecological interactions can in principle alter the amount of enzymes released by each species, as well as their activity. We also assume throughout that the enzymes from each species are not necessarily identical and that they can have different biochemical velocities.

Determining pairwise and third-order interactions

HOIs can be quantified by following the scheme in Fig 3A and are briefly summarized below. Let us consider a consortium of three species (A,B,C) and denote it by V_ABC⁽⁰⁾, the function of this consortium in the absence of any other members in the community (which, consistent with the notation we followed in this paper, is denoted by the ⁽⁰⁾ superscript). In what follows, the function of interest will be the collective starch hydrolysis rate of the enzymes secreted by the consortium. We can decompose V_ABC⁽⁰⁾ in terms of (1) the functional contributions from each of the single species in isolation V_j⁽⁰⁾ (where j = A,B,C), which are equal to the catalytic rates of the enzymes secreted by each species in monoculture; (2) the pairwise interactions measured from each pair in isolation (Δε_ij⁽⁰⁾, where i,j = A,B,C); and (3) a term that captures the HOIs when the three species are together in coculture (Δε_ABC⁽⁰⁾): (12) V_ABC⁽⁰⁾ is the net function of the three-species community, which can be measured experimentally. In addition, all of the V_i⁽⁰⁾ and ε_ij⁽⁰⁾ parameters can also be obtained independently from the function of the monocultures and pairwise cocultures. Therefore, we can experimentally determine the strength of three-way interactions (Δε_ABC⁽⁰⁾) as a function of independently measured experimental parameters: (13) Propagation of errors was used to estimate the uncertainty in the measurement of pairwise and third-order interactions through this approach.

Determining fourth- and higher-order interactions

For communities of size M (larger than three species), Eq 12 can be generalized as (14) where the collection of HOIs can be defined as the sum of all of the three-way (H₃⁽⁰⁾), four-way (H₄⁽⁰⁾), five-way (H₅⁽⁰⁾) interactions in isolation, etc., and can be determined experimentally as: (15)

We can construct approximations to that take into account only pairwise interactions, or only up to third-order interactions, as: (16) or (17)

Minimal model of constitutive amylase expression

To formulate a minimal model of amylase production that incorporates population growth, we first made the simplifying assumption that the extracellular amylase is constitutively expressed by each cell at a constant rate μ_exp. This is a standard and widely used null model of gene expression [87–90]. Assuming that the population grows exponentially with growth rate r, our model can be written through the coupled differential equations: (18) (19) where a(t) represents the amount of amylase in the environment. From Eq 18, we find that N(t) = N(0) e^{r t}. Entering this into Eq 19 and integrating it over the incubation time T, we find that the total amount of enzyme released into the environment (E) is given by E = (μ_exp/r)(N(T) − N(0)) = (μ_exp/r)ΔN.

The proportionality between E and the total population growth ΔN does not require exponential growth and is also found in a model in which the population switches to stationary phase at time τ < T. To prove this, let us assume that cells express amylase constitutively at rate μ_exp in exponential phase and (also constitutively) at rate μ_sta at stationary phase. The total amount of amylase produced is the sum of the amylase produced in each phase of growth: E = E_exp + E_sta. Following the argument given above, E_exp = (μ_exp/r)(N(τ) − N(0)). In stationary phase (for t > τ), N(t) = N(τ) and the differential equation that describes amylase production reduces to da/dt = μ_staN(τ). Integrating this equation between a = [0,E] and t = [τ,T], we find E_sta = μ_staN(τ)(T − τ). Since the population size is constant in stationary phase, N(τ) = N(T) and we can write E_sta as E_sta = μ_staN(T)(T − τ). Given that N(T) >> N(0) (a limit that is fulfilled in our experiments), we can write N(T) ≈ ΔN, and we approximate E_sta = μ_sta(T − τ)N(T) ≈ μ_sta(T − τ)ΔN. Adding up E_sta and E_exp, we find: (20) We note that μ_exp/r is the ratio of the rate of amylase expression and the rate of growth. This ratio is equal to the average amount of amylase produced by a single cell over a doubling period t_div = 1/r. In turn, μ_sta(T − τ) represents the total amount of amylase produced per cell during stationary phase. Given that N(T) >> N(0), we conclude that under constitutive expression, the cumulative amount of amylase secreted by each species is proportional to that species’ population size at the time of harvest, which as discussed in the main text we denote as N_i(T) ≡ n_i. Under the Michaelis-Menten model above, the amylolytic rate is proportional to the enzyme concentration. Therefore, we can write the function of a species as V_i = λ_in_i. Under our additive null model, the function of an M-species consortium would thus be written as: (21)

Minimal model of amylase expression under negative-feedback regulation

We capture this negative-feedback regulation through a simple phenomenological model (Fig 5D and 5E), which coarse-grains the complex biochemical interactions and gene-regulatory circuitry that controls amylase expression through a phenomenological Hill function in which the expression rate of extracellular amylase is down-regulated by the amount of amylase already accumulated in the environment. Such approach is routine practice in the modeling of gene-regulatory circuits [58,88,89], including those mediated by catabolite repression [57,90–92]. To make this model as unconstrained as possible, we analyze a general form of the phenomenological Hill function (equivalent to the Holling type III functional response) that captures a large range of scenarios including different degrees of cooperativity and amplitude of the negative-feedback function. Assuming first that the population is growing exponentially, our model takes the form: (22) (23) Here, q characterizes the steepness of the negative feedback (e.g., if q >> 1, it will be switch-like, whereas if q = 1, it will be gradual), and A represents the threshold concentration of extracellular amylase above which the amylase gene is turned off. The relationship between ΔN and E can be obtained by integrating both equations, and by defining the threshold population size N* = A/(t_divμ_exp), we obtain: (24) We define H as the inverse function of f[x] = x + x^q+1/(q + 1), which gives us: (25)

As shown in S6 Fig for various values of q, E is a saturating function of ΔN. In other words, the model predicts that the amylolytic rate of a population becomes insensitive to changes in the size of the population, past certain population threshold. Also shown in S6 Fig, for comparison, is an example of the type II saturating function we use throughout the paper.

Although we have derived this result for an exponentially growing population, it is straightforward to generalize this result to the same case studied in the previous section: a population that switches to stationary phase at time τ < T after growing exponentially between 0 and τ. Integrating Eq 23, we find: (26) Defining t_div as the timescale of cell division (where r = 1/t_div), the first half of Eq 26 can be written as: (27) This gives us a relationship between E and ΔN: (28) which has the same form as Eq 24, only now the threshold population size is given by N^#≈A/[μ(T– τ + t_div)]. As we show in S6 Fig, this model predicts that the total amount of amylase produced by a population saturates when the population size grows beyond a threshold population size.

Separating the contribution of behavioral and population dynamics pairwise interactions

In Fig 3, we define the functional interactions between species A and B as ε_AB⁽⁰⁾, where: (29) Here, V_AB⁽⁰⁾ is the measured function of the consortium formed by species A and species B, and V_A⁽⁰⁾ and V_B⁽⁰⁾ represent the measured function of each of the species in their respective monocultures. In Fig 5, we introduced and quantified a second null model that incorporated the effect of population dynamics. This new model made use of the functions V_A(.) and V_B(.), which quantitatively map the population size of species A and B after 24 hr of growth in monoculture with the amylolytic rate of the enzymes released by each population over that period. These functions were estimated for all species as shown in Figs 5C and S7. Let us denote the population size reached by species A and B in monoculture as n_A⁽⁰⁾ and n_B⁽⁰⁾ and the population size of A and B in coculture as n_A^(AB) and n_B^(AB). Employing this notation, Eq 29 can be rewritten as: (30)

According to the second null model that incorporates population dynamics, the function of this consortium can also be related to the population size of A and B after 24 hr of coculture, as: (31) where represents the deviation from the null model and can be interpreted as capturing the effect of changes in the expression of amylase. This is the interaction that is quantified in Fig 6. It is straightforward to rewrite Eq 31 by adding and subtracting V_A(n_A⁰) and V_B(n_B⁰) to the right side: (32) We can then define as the change in amylolytic function of A that would be caused solely by an increase or decrease in its population size in coculture with B. We can similarly define and the sum of both as: (33) Entering Eq 33 into Eq 32, we get: (34)

It is therefore straightforward to see, by comparing Eq 34 with Eq 30, that the total interaction we reported in Fig 2 from comparison to the P/A null model () is the sum of an interaction that is solely due to changes in population dynamics in coculture relative to monoculture () (S11 Fig) and an interaction () that captures the overall of change in amylase expression for both species in coculture relative to monoculture (S11 Fig): (35) The result in Eq 35 showcases the connection between the interactions as defined from both null models, and it allows us to estimate the contribution of population dynamics to the net interactions reported in Fig 2. It is worth noting that whereas represents an interaction that is independent of any changes in behavior or gene expression, is defined at a given final population size for both A and B, so it is not entirely independent of changes in population dynamics.

Determining high-order behavioral interactions using the revised null model

Recalling our definition of as the sum of all HOIs for an M-species consortium, we can rewrite the function of an M-species consortium (which we denote by as: (36) It is straightforward to show per our definition above that , where is the density reached by species i in coculture with the M-species consortium, and is the change in function of species i one would predict just due to the different population growth of species i when embedded in the M-species consortium relative to its monoculture. From Eq 35, we also know that . This all allows us to rewrite Eq 36 as: (37) We can then redefine the combined high-order behavioral interactions () as the deviation from the revised null model that incorporates population dynamics after adding to it also the sum of all pairwise behavioral interactions, i.e.: (38) where (39) This allows us to separate the effect of population dynamics and behavioral contributions to the total HOIs: (40) where we have defined the contribution of population dynamics to higher-order interactions as: (41) It may be difficult to appreciate this last point using such a compact, general notation. To illustrate it more clearly, consider the particular case of three-species consortium containing species A, B, and C, in which there are no behavioral interactions. In this instance, . Expanding Eq 41 for this consortium, we would get: (42) We can further expand the pairwise population dynamics interactions as the sum of the effect on each species as discussed above: (43) which can be rewritten as: (44) Consistent with our notation above, reflects the increase (decrease) in the amount of amylase produced by species A due to larger (lower) population growth when in coculture with B and C. In turn, and would reflect the change in amylase production by species A due to changes to its population dynamics when in coculture with either B alone or C alone, respectively. Each term within parentheses characterizes the deviation between the observed change in amylase production by a member of the three-species consortium and the prediction from summing up the deviations observed in each combinatorially assembled two-species subconsortium.

In Fig 6A, we estimated for all pairs using Eq 33. Error bars were determined by error propagation. In Fig 6B, we estimated from Eq 41, and error bars were also determined by error propagation of the terms of the equation.

Estimating model parameters

For P. polymyxa, we estimated the saturating population size K_i by fitting the data in Figs 5C and S7 to the model using R function nls. The monocultures supplemented with B. megaterium supernatant were discarded because of inconsistencies among the replicates. For the other Bacillus species, we estimated u_i by fitting the data in S7 Fig to a constant value. The value of B. mojavensis is likely overestimated, as it reaches higher function values when grown supplemented with spent media of the other species, increasing monotonically with the amount added (S7 and S8 Figs). The value of K_i could not be estimated from this data directly, since the population size is in all cases much larger than K_i (e.g., the data are flat and does not show curvature). The maximum bound of this parameter could be conservatively estimated as half of the minimum population size in our spent media addition experiments.

Quantifying population size of the different Bacillus species in consortia

Combinatorially assembled communities were incubated at 30°C for 24 hr and then stored at −80°C in 40% glycerol. To measure the amount of P. polymyxa CFUs in each mixture, approximately 20 μl of the frozen stock was melted and serially diluted 1:10 up to 1:10⁵. Fifty microliters of dilutions 1:10², 1:10³, 1:10⁴, and 1:10⁵ were then plated onto BE Starch and incubated at 30°C for 48 hr. Plates were scanned with an EPSON Perfection V700-V750 scanner at a 300-dpi resolution, and CFU/mL was recorded with the ImageJ plugin Cell Counter. Colony morphology was different enough to easily allow differential identification of all species (S14 Fig).

Cross-feeding assays

The six Bacillus strains were individually grown in 3 mL of 1x bSAM at 30°C for 24 hr. To obtain the supernatants for cross-feeding assays, cultures were pelleted in 15-mL conical tubes at 3,500 rpm for 15 min in an Eppendorf 5810 tabletop centrifuge. The supernatants were carefully transferred to clean, sterile tubes and kept at room temperature. To eliminate any cells, supernatants were transferred to 0.2-μm spin-filter columns (VWR 82031–358) and centrifuged at 14,000g for 5 min. Each flow-through was subjected to a second filtration step through a 30-KDa centrifugal device (Nanosep 3K; Pall OD003C33) at 5,000g for 10 min to avoid any amylases in subsequent steps. All spent media were sequentially diluted 1:2 in water, and 50 μL was mixed with 250 μL 2x bSAM and 200 μL water in 96-deep-well plates to obtain 1x SAM supplemented at a final concentration of 0.1, 0.05, 0.025, 0.0125, 0.00625, and 0. Two microliters containing 10⁶ CFU of each of the six Bacillus species, processed as described above, was inoculated into this media and grown still at 30°C for 24 hr in 96-deep-well plates (VWR). Plates were covered with Aerogel film (VWR). Optical density (620 nm) of the grown cultures was measured, and the amylolytic rate was determined as above at the end of the incubation period. Prior to filtering, all devices were sanitized with 70% ethanol, according to manufacturer instructions.