Skip to main content
Advertisement
Browse Subject Areas
?

Click through the PLOS taxonomy to find articles in your field.

For more information about PLOS Subject Areas, click here.

  • Loading metrics

Probing the SELEX Process with Next-Generation Sequencing

  • Tatjana Schütze,

    Affiliations Department of Vertebrate Genomics, Max Planck Institute for Molecular Genetics, Berlin, Germany, Institute for Chemistry/Biochemistry, Free University Berlin, Berlin, Germany

  • Barbara Wilhelm,

    Affiliation Department of Computational Molecular Biology, Max Planck Institute for Molecular Genetics, Berlin, Germany

  • Nicole Greiner,

    Affiliations Department of Vertebrate Genomics, Max Planck Institute for Molecular Genetics, Berlin, Germany, Alacris Theranostics GmbH, Berlin, Germany

  • Hannsjörg Braun,

    Affiliations Department of Vertebrate Genomics, Max Planck Institute for Molecular Genetics, Berlin, Germany, Alacris Theranostics GmbH, Berlin, Germany

  • Franziska Peter,

    Affiliation Institute of Biochemistry, Universität Leipzig, Leipzig, Germany

  • Mario Mörl,

    Affiliation Institute of Biochemistry, Universität Leipzig, Leipzig, Germany

  • Volker A. Erdmann,

    Affiliation Institute for Chemistry/Biochemistry, Free University Berlin, Berlin, Germany

  • Hans Lehrach,

    Affiliation Department of Vertebrate Genomics, Max Planck Institute for Molecular Genetics, Berlin, Germany

  • Zoltán Konthur,

    Affiliation Department of Vertebrate Genomics, Max Planck Institute for Molecular Genetics, Berlin, Germany

  • Marcus Menger,

    Affiliation RiNA RNA-Netzwerk Technologien GmbH, Berlin, Germany

  • Peter F. Arndt,

    Affiliation Department of Computational Molecular Biology, Max Planck Institute for Molecular Genetics, Berlin, Germany

  • Jörn Glökler

    j.gloekler@alacris.de

    Affiliations Department of Vertebrate Genomics, Max Planck Institute for Molecular Genetics, Berlin, Germany, Alacris Theranostics GmbH, Berlin, Germany

Abstract

Background

SELEX is an iterative process in which highly diverse synthetic nucleic acid libraries are selected over many rounds to finally identify aptamers with desired properties. However, little is understood as how binders are enriched during the selection course. Next-generation sequencing offers the opportunity to open the black box and observe a large part of the population dynamics during the selection process.

Methodology

We have performed a semi-automated SELEX procedure on the model target streptavidin starting with a synthetic DNA oligonucleotide library and compared results obtained by the conventional analysis via cloning and Sanger sequencing with next-generation sequencing. In order to follow the population dynamics during the selection, pools from all selection rounds were barcoded and sequenced in parallel.

Conclusions

High affinity aptamers can be readily identified simply by copy number enrichment in the first selection rounds. Based on our results, we suggest a new selection scheme that avoids a high number of iterative selection rounds while reducing time, PCR bias, and artifacts.

Introduction

SELEX (“Systematic Evolution of Ligands by Exponential Enrichment”) has been introduced independently in the labs of Larry Gold [1] and Jack Szostak [2] as a novel in vitro selection technique for the generation of high affinity nucleic acid binders (termed aptamers) to almost any given target. It generally involves many repetitive selection steps, followed by an analysis of enriched nucleic acids (see Figure 1). Many improvements to the original SELEX protocol have been made over the last two decades. Most of these address the mode of selection, immobilization, stringency and automation [3]. However, the advent of next generation sequencing technologies had little impact on aptamer selections so far. Performing many selection rounds on a target is time consuming and cumbersome if performed manually. Few publications can be found that describe the multiple problems and pitfalls that are associated with SELEX [4][6], such as PCR artifacts, background binders and targets that are unsuited as nucleic acid ligands. Due to the SELEX procedure, the nucleic acid population can be compared to a black box that remains closed until the last selection round. It is finally opened by sequencing of some hundred clones with the inherent risk of identifying only unspecific artifacts. We have investigated the fluctuation of library diversities during SELEX by analyzing re-melting profiles of DNA pools before [7]. However, enrichment of individual sequences that may exist in extremely low copies in the initial selection rounds can not be detected by this assay alone. Here, we show that next generation sequencing allows a successful isolation of high quality target binders after very few selection rounds, leading to a dramatic improvement in terms of duration and amount of experimental procedures necessary. First examples that demonstrate the usefulness of next-generation sequencing in library selections have been published [8][10]. To this end we have analyzed the selection of aptamers using Illumina's high-throughput sequencing platform on pools from all selection rounds. As a model target, we have used streptavidin immobilized on magnetic beads. Following an automated selection protocol that we have developed earlier [11], ten selection rounds were performed and the results were compared with those obtained by conventional Sanger sequencing.

thumbnail
Figure 1. Schematic outline of the general SELEX procedure.

https://doi.org/10.1371/journal.pone.0029604.g001

Results

Semi-automated Selection

Starting with a synthetic oligonucleotide library with 40 randomized bases, we have performed ten selection rounds. In each round different means of stringency were applied in order to enrich aptamers specific for streptavidin. In total, we have decreased the amount of input DNA, target molecule concentration and incubation times and increased the number of washing steps as well as washing volumes (Table 1). The resulting DNA yields after PCR and purification were quantified to monitor the enrichment of binders. In order to reduce PCR artifacts and to keep the library free from aberrantly replicating sequences, we have performed as little PCR cycles as necessary.

Diversity assay

The enrichment of target-specific sequences and thus the loss of diversity over the course of selection could be monitored effectively with our diversity assay [7]. Following the principle of the Cot analysis [12], the diversity assay is based on the remelting kinetics of double-stranded DNA pools. Generally, the more diverse the DNA pool the longer it will take to re-hybridize after complete denaturation. Synthetic standard oligonucleotides with defined diversities allow a direct comparison with unknown pools. Remelting profiles (Figure 2) clearly indicate the collapse of diversity after the third round. Comparison of remelting temperature to the diversity standard indicates that from round 4 on, the population consists of less than 103 different sequences and kept constant until the end of selection.

thumbnail
Figure 2. Remelting curves of diversity assay.

a) diversity standard and b) selection rounds (1–10).

https://doi.org/10.1371/journal.pone.0029604.g002

Next Generation Sequencing results

We have obtained a total number of about 13 million reads by Illumina sequencing, of which 56% could be sorted according to their barcodes (see Table S1). A further screening for inserts of 40 bases with a tolerance of two bases resulted in 43% or 5.5 million reads that were used for our analysis. Despite equimolar mixture of barcoded and purified PCR products for the sequencing pool, the identified barcodes were not evenly distributed. The resulting pool of selection round 1 (barcode S1A02) did account for 1.6% of total reads in comparison to the most abundant reads in the unselected pool (barcode S1A01) of 5.3%. The barcoded sequences with proper insert length were finally sorted by copy number and a compiled file containing lists of the 100 most frequent clones of all ten selection rounds including the initial pool is available in supplemental data 1–11 (tabs round 0–10). Eight clones including some of the most enriched sequences were tracked over the selection rounds and are shown in Table 2 and were later studied in greater detail.

thumbnail
Table 2. List of oligonucleotides identified by Illumina sequencing after 10 selection rounds and analyzed in this study with parts corresponding to the putative consensus sequences printed in bold.

https://doi.org/10.1371/journal.pone.0029604.t002

Fluorescent dye-linked aptamer assay (FLAA) results

The enrichment of binding sequences by the selection procedure (round 0 to 10) could be demonstrated by the non-radioactive FLAA (Figure 3). Additionally, synthetic oligonucleotides of selected single clones that were identified by Sanger and high-throughput sequencing were tested for their binding performance. Observed binding capacity was high for the clones R10#10 and R10#62 and slightly lower for R10#17, R10#86 and R10#1a (Figure 4). Unexpectedly, some of the selected clones displayed an elevated background signal on biotin-blocked streptavidin.

thumbnail
Figure 3. Microtiter plate binding assay (FLAA) of selection pools to immobilized streptavidin.

Depicted are rounds 1 to 10 with the original library pool indicated as round 0.

https://doi.org/10.1371/journal.pone.0029604.g003

thumbnail
Figure 4. Microtiter plate binding assay (FLAA) of single clones applied as synthetic oligonucleotides to immobilized streptavidin.

https://doi.org/10.1371/journal.pone.0029604.g004

Surface plasmon resonance (SPR) results

Due to the dense surface coating of the commercially available streptavidin chip, the effect of rebinding made the measurement and especially the evaluation of binding kinetics difficult. For this reason, we have coupled a chip with a lower density of streptavidin (900 RU) to allow a better study of the binding kinetics. SPR sensorgrams for the best binding aptamer R10#17 in dilutions of 100 nM to 2 µM are shown in Figure 5. Based on association rate constant (kon) of 1.5×104 M−1 s−1 and dissociation rate constant (koff) of 2.2×10−3 s−1 a Kd value on 140 nM was obtained after global fitting to a 1∶1 Langmuir binding model. The χ2 value, a standard statistical measure of the closeness of fit, was 0.535.

thumbnail
Figure 5. SPR sensorgram of streptavidin-aptamer binding.

Streptavidin was covalently immobilized on a CM5-chip. Aptamer clone R10#17 with highest affinity determined by FLAA was injected at a concentrations ranging between 0.1 and 2 µM in binding buffer.

https://doi.org/10.1371/journal.pone.0029604.g005

Analogous to the measurement of binding constants, all identified FLAA-tested oligonucleotides were used in further SPR experiments. 1 µM aptamer solutions were analyzed on a second chip with immobilized streptavidin (7000 RU). The corresponding sensorgrams are shown in Figure 6. The color code indicates the ranking position of the clone in the 10th selection round (red: high enrichment, blue: low enrichment). Best binding results were observed for the clones R10#17 and R10#86. The most frequent clone R10#1a showed affinity for the target in “antisense” direction, not in “sense” orientation. Additionally, clone R10#62a displayed a very low dissociation kinetic, different from all other tested clones. Strong background clones identified in the FLAA were negative in the surface plasmon resonance experiment.

thumbnail
Figure 6. SPR sensorgram of selected oligonucleotides for direct comparison of binding affinity at identical concentration (1 µM).

https://doi.org/10.1371/journal.pone.0029604.g006

Discussion

Based on a semi-automated approach for the selection of DNA aptamers [11], we have adapted our original procedures to work on a robotic magnetic particle processor designed to work in a standard microtiter plate format. Generally, such high-throughput automation allows the application of reproducible conditions while still retaining greatest flexibility [13]. The synthetic DNA library was designed to contain a stretch of 40 randomized bases flanked by 18 constant bases as primer binding sites for PCR amplification. The primer sites were checked to be devoid of hairpin, dimer, and heterodimer-forming sequences. In order to remain flexible in terms of next generation sequencing platform for analysis, we did not directly adopt Illumina's primer sequences. We have omitted the generation of single-stranded DNA by the popular biotin-streptavidin method because of the target protein is already Streptavidin itself. However, the successful use of double-stranded DNA in SELEX has been demonstrated before [14], most likely because highly diverse DNA pools remain single stranded after denaturation [7]. In order to follow the selection process, we have monitored the PCR yield of every selection round analyzed the pools for diversity [7] and observed binding behavior by a fluorescent dye-linked aptamer assay (FLAA) [15]. Despite the increased stringency in the course of the selection, a strong increase yield of PCR product was observed (see Table S2). The diversity assay also shows a dramatic drop of pool diversity following the third selection round (see Figure 2). However, an efficient target binding was not detected by FLAA until round four. The binding signal then increased strongly until round six. We have sequenced 25 clones by conventional Sanger sequencing after the 10th selection round, albeit with deletions and missing insert (see Table S3). However, we could identify several sequences associated with specific binding by FLAA. We were interested in the first appearance of specific binders and their dynamics during the selection and performed next generation sequencing of library pools from all ten selection rounds. For analysis, we have compiled lists containing the top 100 occurring sequences (see Supporting Information S1). Interestingly, the best binders (R10#17 and R10#86) that were identified by Sanger sequencing of the tenth selection round already exist in the very first round, albeit at a very low copy number (7 and 4 respectively of 2×106 total reads) just above the background of about two copies per sequence. Enriched binders became more apparent in the second and third selection round. In the fourth round, in which binding could be detected by FLAA, the most frequent clone already accounts for 11% of all sequencing reads. The highest count (22%) of a single clone is observed in round six (Figure 7). The number of low-frequency background binders, characterized by single sequences, drops sharply after round four (Figure 8) and levels off to almost 80%. However, most or the unique clones that occur after round 5 are derivatives of strongly enriched clones which can be attributed to either mutation or sequencing artifacts.

thumbnail
Figure 7. Relative frequency of clones in the pools (top100) of round 1 to 10 as evaluated by next generation sequencing.

https://doi.org/10.1371/journal.pone.0029604.g007

thumbnail
Figure 8. Loss of background binders characterized as unique clones in sequenced pools over the entire selection procedure.

https://doi.org/10.1371/journal.pone.0029604.g008

The most prominent motif for streptavidin binding was identified by MEME [16]. Since MEME is not designed to process more than 1000 clones, we decided to select only the topmost enriched sequences (max. 800 clones) for analysis. We identified a motif in the third selection round that only gets slightly more defined in later selection rounds (Figure 9a). However, the palindrome of ACGCNNNNNNCGCA identified from the 3rd round fits most sequences that are enriched during the selection rounds on Streptavidin (Figure 9b). Generally, these motifs are similar to DNA aptamers selected against streptavidin found in other studies [17][19], which have been compared and analyzed in more detail by Bing et al. [20]. It seems that these are of more structural relevance [20] and thus difficult to discover by word-based methods.

thumbnail
Figure 9. Sequence motifs and distribution.

a) Motifs identified by MEME from some selection rounds. b) Frequency of simplified palindrome in the sequence pools (top100) of round 1 to 10.

https://doi.org/10.1371/journal.pone.0029604.g009

The constant primer sequences of the library have been designed not to form any secondary structure and should not strongly interfere with those in the randomized area of the library. Because the clones identified by high-throughput sequencing do not exist in an isolated physical form as the obtained Sanger clones, we decided to order fully synthetic oligonucleotides encompassing only the variable part of 40 bases without the constant regions for further binding analysis. Since the FLAA analysis can only be used as a qualitative binding assay, surface plasmon resonance was used for quantitative analysis of the selected aptamer binding properties.

An important issue of performing many selection rounds is the introduction of mutations by Taq polymerase. Indeed, we have observed mutant clones to arise during the course of selection which reflects the use of Taq polymerase for turning SELEX into an in vitro evolution method if many selection rounds are performed. Some of the abundant clones were found to accumulate mutations over the selection rounds (Figure 10). Mutations occur mainly outside the proposed consensus motifs. However, one such substitution in the enriched clone R10#17 over R10#86 did change the binding affinity in our SPR experiments and proved to be the strongest binder that we have analyzed (Figure 5 and 6).

thumbnail
Figure 10. Heat map indicating mutation frequency in selected abundant clones over selection rounds 5 to10 listed in successive rows.

Red color represents high mutation rates in the respective positions whereas little ore no mutations are colored blue.

https://doi.org/10.1371/journal.pone.0029604.g010

Interestingly, the most abundant clones analyzed in the final selection round did not directly coincide with the strongest binding behavior. However, some of the enriched clones may bind only in the context of primer sequences or in the antisense orientation (R10#1a). The best binders were found to accumulate very early in the first (R10#86) and second selection rounds (R10#17). This distribution indicates a strong selection bias in favor of PCR performance over binding properties.

Based on our results and in accord with other new developments [21] we recommend to perform three selection rounds on a given target immobilized on magnetic beads and sequence the pools by a next generation method. Scoring the copy numbers of certain clones will help identifying signatures of specific binders that become obvious in the later selection rounds. Those signatures help to pick those clones that already appear in the first selection rounds and are thus more likely belonging to the set of better binders. A simple analysis by FLAA helps identifying the strong binders that can be analyzed in further detail by SPR. This approach may allow to shorten SELEX experiments including the more lengthy and cumbersome RNA selections [13], and to retrieve high affinity binders from highly diverse random libraries.

Materials and Methods

Materials

All oligonucleotides including the DNA library of 40 randomized bases (Bank40) were purchased from Purimex RNA/DNA Oligonucleotides (Grebenstein, Germany). Semi-automated selections were performed with Magnetic Particle Processors Kingfisher Flex (Thermo Scientific, Bonn, Germany). Streptavidin magnetic beads (Dynabeads® M-280 Streptavidin) were purchased from Invitrogen GmbH (Karlsruhe, Germany). Taq DNA Polymerase (EURx, Poland) was used for amplification after each selection round and resulting products were purified with sbeadex® (LGC Genomics, Germany).

Semiautomatic in vitro selection

2 nmol of the Bank40 library was initially amplified by PCR for 3 cycles (95°C for 30 s, 95°C for 2 min, 55°C for 1 min, 72°C for 3 min, 3 cycles, 72°C for 5 min). Input for the first selection round was 2 nmol of dsDNA purified from the PCR reaction (Bank40), denatured (94°C for 3 min) in binding buffer (1×) and chilled on ice. Binding and washing steps were performed in 1× binding buffer (20 mM Tris, 140 mM NaCl, 5 mM MgCl2, 2 mM CaCl2, 2 mM KCl and 0.05% Tween 20 (pH 7.4)). Streptavidin aptamers were generated by SELEX protocol outlined in Table 1 using streptavidin-coated magnetic beads and the KingFisher Flex Magnetic Particle Processor (Thermo Scientific). PCR for amplification of retained DNA was performed directly on magnetic beads without elution step.

Cloning and Sanger sequencing

PCR products of the 10th selection round were inserted into pCR®2.1-TOPO by the use of TOPO® TA Cloning® Kit (Invitrogen) according to the manufacturer's instructions and E. coli cells (DH5α) were transformed via heat shock. Overnight cultures were grown from single colonies and plasmid DNA was extracted and purified by NucleoSpin® Plasmid (Macherey-Nagel, Düren, Germany). Plasmid inserts of the selected clones were sequenced by conventional Sanger method.

DNA pool generation for Illumina sequencing

Barcodes were attached by PCR to the pools of all selection rounds. The samples were amplified using the SPro5 forward primer and the SPro3 index primers containing 6mer barcodes suggested by Illumina Inc. (SiA1Pro3-SiA11Pro3, Table S4). After purification of the samples using Wizard SV Gel and PCR Clean-Up System (Promega Corporation, USA) all samples were mixed in equimolar amounts (each 500 ng) and sequenced in a single lane of an Illumina Genome Analyzer GA2 for 100 bases.

Sequence data evaluation

Base calling following the sequencing procedure was done with the Bustard package. In total nearly 13 million reads were obtained. Subsequently primers and tags specific for each selection round were mapped to each read using RazerS [22]. A list of tags and primers can be found in Table S4. To reduce analysis of artifacts, only those reads were kept that mapped without mismatches and had a random part with a length between 38 and 42 bp. About 5.5 million clones (43%) fulfilled these criteria and could be assigned to one of the rounds depending on their tag.

Qualitative binding studies by fluorescent dye-linked aptamer assay (FLAA)

The enrichment of binding sequences over the course of selection was monitored with a non-radioactive fluorescence microtiter plate assay [15]. Streptavidin coated 96 well microtiter plates were incubated with 12 pmol of dsDNA of the initial library stock in 50 µl selection binding buffer for 1 h at room temperature. In the analysis of single clones, 12 pmol synthetic ssDNA oligonucleotides were applied per well under identical conditions. Biotin-blocked wells were used as negative controls. Wells were washed twice with 200 µl binding buffer before 50 µl OliGreen (1∶500 in binding buffer, Molecular Probes®, Eugene, USA) was added and after incubation of 9 min relative fluorescence (excitation 485 nm, emission 527 nm) was measured (POLARstar Omega, BMG Labtech).

Affinity determination by surface plasmon resonance

The Biacore™ X platform (GE Healthcare, USA) was used to perform binding analysis of the selected ssDNA aptamers. Therefore, Streptavidin was immobilized onto a CM5 sensor chip (GE Healthcare, USA) utilizing amine coupling. Immobilization was carried out at a flow rate of 5 µl/min in 20 mM HEPES, 150 mM NaCl, 3 mM EDTA and 0.005% Surfactant P20 (pH 7.4). The surface of the CM5 chip was activated for 7 min with 0.02 M EDC (1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide) and 0.05 M NHS (N-hydroxysuccinimide). After the injection of 10 µl 10 µg/ml Streptavidin (ImmunoPure® Streptavidin, Thermo Scientific, Bonn, Germany) in 10 mM sodium acetate (pH 4), 35 µl of 1 M ethanolamine (pH 8.5) were used to block remaining reactive groups followed by two washing steps. The procedure resulted in an increase of ca. 900 response units (RU) on channel 2. A reference cell was generated by activating and blocking without adding streptavidin (channel 1). Binding analysis was conducted at a flow rate of 30 µl/min with binding buffer at 25°C. Prior to injection, synthetic ssDNA oligonucleotides were denatured for 3 min at 94°C and refolded in binding buffer. 30 µl of the ssDNA solution in a range from 0.1 to 2.0 µM were injected into both channels of the flow cell. After each ssDNA injection, the chip surface was regenerated by injection of 2×10 µl 0.5 mM NaCl/0.5 mM MgCl2. For background correction, the response signal of the reference cell was subtracted from the signal of the immobilized surface.

Association and dissociation rates and constants of the aptamer–streptavidin complexes were determined using BIAevaluation software (version 4.1, Biacore).

Supporting Information

Supporting Information S1.

Top100 of Illumina-sequenced library pool (Bank40).

https://doi.org/10.1371/journal.pone.0029604.s001

(XLS)

Table S1.

Efficiency of Illumina sequencing and barcoding. Insert refers to reads of expected length of approximately 40 bases.

https://doi.org/10.1371/journal.pone.0029604.s002

(DOC)

Table S2.

PCR yields from selection-round amplification.

https://doi.org/10.1371/journal.pone.0029604.s003

(DOC)

Table S3.

list of clones, sequenced by Sanger method.

https://doi.org/10.1371/journal.pone.0029604.s004

(DOC)

Table S4.

list of oligonucleotides used in this study.

https://doi.org/10.1371/journal.pone.0029604.s005

(DOC)

Author Contributions

Conceived and designed the experiments: M. Mörl HL VAE JG. Performed the experiments: TS NG HB FP M. Menger ZK. Analyzed the data: BW PFA JG. Contributed reagents/materials/analysis tools: M. Menger. Wrote the paper: TS JG.

References

  1. 1. Tuerk C, Gold L (1990) Systematic evolution of ligands by exponential enrichment: RNA ligands to bacteriophage T4 DNA polymerase. Science 249: 505–510.
  2. 2. Ellington AD, Szostak JW (1990) In vitro selection of RNA molecules that bind specific ligands. Nature 346: 818–822.
  3. 3. Cox JC, Ellington AD (2001) Automated selection of anti-protein aptamers. Bioorg Med Chem 9: 2525–2531.
  4. 4. Stanlis KKH, McIntosh JR (2003) Single-strand DNA aptamers as probes for protein localization in cells. J Histochem Cytochem 51: 797–808.
  5. 5. Shtatland T, Gill SC, Javornik BE, Johansson HE, Singer BS, et al. (2000) Interactions of Escherichia coli RNA with bacteriophage MS2 coat protein: genomic SELEX. Nucleic Acids Res 28: E93.
  6. 6. Nieuwlandt D (2000) In vitro selection of functional nucleic acid sequences. Curr Issues Mol Biol 2: 9–16.
  7. 7. Schütze T, Arndt PF, Menger M, Wochner A, Vingron M, et al. (2010) A calibrated diversity assay for nucleic acid libraries using DiStRO–a Diversity Standard of Random Oligonucleotides. Nucleic Acids Res 38: e23.
  8. 8. Dias-Neto E, Nunes DN, Giordano RJ, Sun J, Botz GH, et al. (2009) Next-generation phage display: integrating and comparing available molecular tools to enable cost-effective high-throughput analysis. PLoS ONE 4: e8338.
  9. 9. Jolma A, Kivioja T, Toivonen J, Cheng L, Wei G, et al. (2010) Multiplexed massively parallel SELEX for characterization of human transcription factor binding specificities. Genome Res 20: 861–873.
  10. 10. Buller F, Steiner M, Frey K, Mircsof D, Scheuermann J, et al. (2011) Selection of Carbonic Anhydrase IX Inhibitors from One Million DNA-Encoded Compounds. ACS Chem Biol 6: 336–344.
  11. 11. Wochner A, Cech B, Menger M, Erdmann VA, Glökler J (2007) Semi-automated selection of DNA aptamers using magnetic particle handling. BioTechniques 43: 344, 346, 348 passim.
  12. 12. Britten RJ, Kohne DE (1968) Repeated sequences in DNA. Hundreds of thousands of copies of DNA sequences have been incorporated into the genomes of higher organisms. Science 161: 529–540.
  13. 13. Glökler J, Schütze T, Konthur Z (2010) Automation in the high-throughput selection of random combinatorial libraries–different approaches for select applications. Molecules 15: 2478–2490.
  14. 14. Bruno JG, Kiel JL (2002) Use of magnetic beads in selection and detection of biotoxin aptamers by electrochemiluminescence and enzymatic methods. BioTechniques 32: 178–180.182–183
  15. 15. Wochner A, Glökler J (2007) Nonradioactive fluorescence microtiter plate assay monitoring aptamer selections. BioTechniques 42: 578.580582
  16. 16. Bailey TL, Elkan C (1994) Fitting a mixture model by expectation maximization to discover motifs in biopolymers. Proc Int Conf Intell Syst Mol Biol 2: 28–36.
  17. 17. Stoltenburg R, Reinemann C, Strehlitz B (2005) FluMag-SELEX as an advantageous method for DNA aptamer selection. Anal Bioanal Chem 383: 83–91.
  18. 18. Wang C, Yang G, Luo Z, Ding H (2009) In vitro selection of high-affinity DNA aptamers for streptavidin. Acta Biochim Biophys Sin (Shanghai) 41: 335–340.
  19. 19. Bittker JA, Le BV, Liu DR (2002) Nucleic acid evolution and minimization by nonhomologous random recombination. Nat Biotechnol 20: 1024–1029.
  20. 20. Bing T, Yang X, Mei H, Cao Z, Shangguan D (2010) Conservative secondary structure motif of streptavidin-binding aptamers generated by different laboratories. Bioorg Med Chem 18: 1798–1805.
  21. 21. Cho M, Xiao Y, Nie J, Stewart R, Csordas AT, et al. (2010) Quantitative selection of DNA aptamers through microfluidic selection and high-throughput sequencing. Proc Natl Acad Sci USA 107: 15373–15378.
  22. 22. Weese D, Emde A-K, Rausch T, Döring A, Reinert K (2009) RazerS—fast read mapping with sensitivity control. Genome Research 19: 1646–1654.