User profiles for D. Tallman
Darin Joseph TallmanChemours Verified email at chemours.com Cited by 1478 |
Electroactive conducting polymers for corrosion control: Part 1. General introduction and a review of non-ferrous metals
DE Tallman, G Spinks, A Dominis… - Journal of Solid State …, 2002 - Springer
… The fundamental interactions of polyaniline with Al 2024-T3 and Al 7075-T6 alloys were
investigated by Tallman and co-workers [47, 48]. EIS and the electrochemical noise method (…
investigated by Tallman and co-workers [47, 48]. EIS and the electrochemical noise method (…
Electroactive conducting polymers for corrosion control: part 2. Ferrous metals
…, AJ Dominis, GG Wallace, DE Tallman - Journal of Solid State …, 2002 - Springer
This paper reviews the literature describing the effects of conducting polymer coatings on the
corrosion rate of ferrous alloys (iron, steel and stainless steel). The literature is interpreted …
corrosion rate of ferrous alloys (iron, steel and stainless steel). The literature is interpreted …
A Critical Review of the Oxidation of Ti2AlC, Ti3AlC2 and Cr2AlC in Air
Of all the M n+1 AX n phases, the most resistant to oxidation in air in the 900–1,400C
temperature range are Ti 2 AlC, Ti 3 AlC 2 and Cr 2 AlC. A literature review, however, shows that …
temperature range are Ti 2 AlC, Ti 3 AlC 2 and Cr 2 AlC. A literature review, however, shows that …
Arsenic species as an indicator of redox conditions in groundwater
JA Cherry, AU Shaikh, DE Tallman… - Developments in water …, 1979 - Elsevier
… The apparatus and methodology used for As speciation analysis in this study are described
by Shaikh and Tallman (1978). Distilled deionized water was used to prepare all solutions. …
by Shaikh and Tallman (1978). Distilled deionized water was used to prepare all solutions. …
EIS studies of coated metals in accelerated exposure
G Bierwagen, D Tallman, J Li, L He… - Progress in organic …, 2003 - Elsevier
… Based on these references, for our work on exterior coatings, the ASTM D 5894-96 exposure
protocol supplemented by various physical measurements was chosen. The details of this …
protocol supplemented by various physical measurements was chosen. The details of this …
Weathering degradation of a polyurethane coating
XF Yang, C Vang, DE Tallman, GP Bierwagen… - … degradation and stability, 2001 - Elsevier
The degradation of polyurethane topcoat over a chromate pigmented epoxy primer was
examined by atomic force microscopy (AFM), scanning electronic microscopy (SEM), X-ray photo…
examined by atomic force microscopy (AFM), scanning electronic microscopy (SEM), X-ray photo…
Interpretation of EIS data from accelerated exposure of coated metals based on modeling of coating physical properties
BR Hinderliter, SG Croll, DE Tallman, Q Su… - Electrochimica …, 2006 - Elsevier
… He, D. Tallman, Fundamentals of the measurement of corrosion protection and the prediction
of its lifetime in coating, in: J. Martin, D. Ram (Ed.), Proceedings of the Second International …
of its lifetime in coating, in: J. Martin, D. Ram (Ed.), Proceedings of the Second International …
Studies of a new accelerated evaluation method for coating corrosion resistance—thermal cycling testing
…, L He, J Li, L Ellingson, DE Tallman - Progress in organic …, 2000 - Elsevier
A long time is often needed to differentiate the corrosion protection afforded by coatings
systems, especially for high performance samples. Accelerating methods such as salt spray or …
systems, especially for high performance samples. Accelerating methods such as salt spray or …
MAX phase carbides and nitrides: Properties for future nuclear power plant in-core applications and neutron transmutation analysis
…, DW Vinson, RL Sindelar, DJ Tallman… - … Engineering and Design, 2012 - Elsevier
A family of ternary carbides and nitrides, known as MAX phases, combine attractive
properties of both ceramics and metals, and has been suggested for potential nuclear reactor …
properties of both ceramics and metals, and has been suggested for potential nuclear reactor …
Effect of neutron irradiation on select MAX phases
DJ Tallman, EN Hoffman, NC El'ad, BL Garcia-Diaz… - Acta Materialia, 2015 - Elsevier
Herein we report on the effect of neutron irradiation – of up to 0.1 displacements per atom at
360(20) C or 695(25) C – on polycrystalline samples of Ti 3 AlC 2 , Ti 2 AlC, Ti 3 SiC 2 and …
360(20) C or 695(25) C – on polycrystalline samples of Ti 3 AlC 2 , Ti 2 AlC, Ti 3 SiC 2 and …