User profiles for Jeremy Marston
Jeremy Oliver MarstonTexas Tech University Verified email at ttu.edu Cited by 2494 |
Stabilization of Leidenfrost vapour layer by textured superhydrophobic surfaces
In 1756, Leidenfrost 1 observed that water drops skittered on a sufficiently hot skillet, owing
to levitation by an evaporative vapour film. Such films are stable only when the hot surface is …
to levitation by an evaporative vapour film. Such films are stable only when the hot surface is …
Drag reduction by Leidenfrost vapor layers
We demonstrate and quantify a highly effective drag reduction technique that exploits the
Leidenfrost effect to create a continuous and robust lubricating vapor layer on the surface of a …
Leidenfrost effect to create a continuous and robust lubricating vapor layer on the surface of a …
Crown sealing and buckling instability during water entry of spheres
We present new observations from an experimental investigation of the classical problem of
the crown splash and sealing phenomena observed during the impact of spheres onto …
the crown splash and sealing phenomena observed during the impact of spheres onto …
Experimental and numerical characterization of the water flow in spacer-filled channels of spiral-wound membranes
Micro-scale flow distribution in spacer-filled flow channels of spiral-wound membrane modules
was determined with a particle image velocimetry system (PIV), aiming to elucidate the …
was determined with a particle image velocimetry system (PIV), aiming to elucidate the …
High-speed video investigation of jet dynamics from narrow orifices for needle-free injection
M Moradiafrapoli, JO Marston - Chemical Engineering Research and …, 2017 - Elsevier
An experimental study to examine the hydrodynamic performance and start-up phase of
liquid jets for needle-free injection was performed. With the use of high-speed videography at …
liquid jets for needle-free injection was performed. With the use of high-speed videography at …
Dynamic air layer on textured superhydrophobic surfaces
We provide an experimental demonstration that a novel macroscopic, dynamic continuous air
layer or plastron can be sustained indefinitely on textured superhydrophobic surfaces in air…
layer or plastron can be sustained indefinitely on textured superhydrophobic surfaces in air…
Feasibility of laser induced jets in needle free jet injections
This paper reports a detailed characterization of laser-induced micro-jets, including ex vivo
experiments using skin as a target substrate to check the feasibility in terms of needle-free jet …
experiments using skin as a target substrate to check the feasibility in terms of needle-free jet …
Squeeze flow of a Carreau fluid during sphere impact
We present results from a combined numerical and experimental investigation into the
squeeze flow induced when a solid sphere impacts onto a thin, ultra-viscous film of non-…
squeeze flow induced when a solid sphere impacts onto a thin, ultra-viscous film of non-…
Characterization of jets for impulsively-started needle-free jet injectors: Influence of fluid properties
…, KE Broderick, JA Simmons, JO Marston - Journal of Drug Delivery …, 2019 - Elsevier
An experimental study was performed to assess the hydrodynamics of liquid jets used for
needle-free injection, where the typical orifice diameter is ~155 μm and velocity is in range of ~ …
needle-free injection, where the typical orifice diameter is ~155 μm and velocity is in range of ~ …
In-vitro studies of jet injections
P Rohilla, JO Marston - International journal of pharmaceutics, 2019 - Elsevier
In this study, needle-free jet injection dynamics were studied using homogeneous gelatin as
model substrates. Whilst keeping nozzle properties such as orifice diameter ( d o ) and …
model substrates. Whilst keeping nozzle properties such as orifice diameter ( d o ) and …