Corrosion control of metals is of technical, economical, environmental, and aesthetical
importance. The negative impacts of corrosion are so enormous, and it is therefore imperative for …

The effect of phosphonate anion (PHOS) on the corrosion of ordinary steel in simulated
cooling water has been studied using weight loss, polarization curves and electrochemical …

The influence of the extracted cinnamon essential oil (CiO) on the copper corrosion resistance
in acidified 3.0 wt% NaCl (pH = 2) medium was investigated by using electrochemical …

Atoms at a free surface experience a different local environment than do atoms in the bulk of
a material. As a result, the energy associated with these atoms will, in general, be different …

For many years, we have taught courses on micromechanics at our respective institutions (JQ
at the Georgia Institute of Technology and MC at the University of Metz). We both felt the …

Several couplings between plasticity and martensitic phase transformation are at the origin
of remarkable properties of ductility and toughness in the case of TRIP steels. A …

Electron backscattered diffraction serial image analyses on AM30 magnesium alloy
compressed under profuse {1012} twinning conditions at different strain levels suggest that twin …

… v = F f − F g − F d J Ω = − Ω T × J Ω + τ b − τ c − τ a where m is total mass of the system, J =
d i a g ( I x x , I y y , I z z ) is a symmetric positive definite matrix with I x x , I y y , and I z z denote …

This paper investigates the design of a robust controller for the trajectory tracking problem of
an under-actuated quadrotor UAV subject to the modeling uncertainties and unknown …

… as the GHI reaches a maximum value of 2455 kWh/m 2 /year with an average of 2141
kWh/m 2 /year, while DNI reaches 3232 kWh/m 2 /year and an average of 2368 kWh/m 2 /year. …