Critical review of automotive steels spot welding: process, structure and properties
M Pouranvari, SPH Marashi - Science and Technology of welding …, 2013 - Taylor & Francis
… The physical principal for achieving this heat generation is defined by Joule’s law, which in
its … Citation9 Failure of spot welds may affect the vehicle’s stiffness and noise, vibration and …
its … Citation9 Failure of spot welds may affect the vehicle’s stiffness and noise, vibration and …
The interplay between vitamin D and viral infections
The pleiotropic role of vitamin D has been explored over the past decades and there is
compelling evidence for an epidemiological association between poor vitamin D status and a …
compelling evidence for an epidemiological association between poor vitamin D status and a …
The effect of intercritical heat treatment temperature on the tensile properties and work hardening behavior of ferrite–martensite dual phase steel sheets
P Movahed, S Kolahgar, SPH Marashi… - Materials Science and …, 2009 - Elsevier
This paper aims to investigate tensile properties and work hardening behavior of dual phase
(DP) steels. A series of DP steels containing ferrite and martensite with different volume …
(DP) steels. A series of DP steels containing ferrite and martensite with different volume …
Vitamin D and Covid‐19: from potential therapeutic effects to unanswered questions
M Teymoori‐Rad, SM Marashi - Reviews in medical virology, 2021 - Wiley Online Library
Evidence suggests that vitamin D supplementation could potentially be effective either in
treatment or prevention of coronavirus disease 2019 (Covid‐19). Indeed, several studies and …
treatment or prevention of coronavirus disease 2019 (Covid‐19). Indeed, several studies and …
Improved drug loading and antibacterial activity of minocycline-loaded PLGA nanoparticles prepared by solid/oil/water ion pairing method
…, M Esfandyari-Manesh, SMA Marashi… - International journal …, 2012 - Taylor & Francis
Background Low drug entrapment efficiency of hydrophilic drugs into poly(lactic-co-glycolic
acid) (PLGA) nanoparticles is a major drawback. The objective of this work was to investigate …
acid) (PLGA) nanoparticles is a major drawback. The objective of this work was to investigate …
Failure mode transition in AHSS resistance spot welds. Part I. Controlling factors
M Pouranvari, SPH Marashi - Materials Science and Engineering: A, 2011 - Elsevier
… [24] in the modeling of the failure load of the Al spot weld under cross-tension test, a porosity
(void) factor (P) can be defined as follows:(8) P = A t o t a l − A P o r o s i t y A t o t a l , 0 ≺ P …
(void) factor (P) can be defined as follows:(8) P = A t o t a l − A P o r o s i t y A t o t a l , 0 ≺ P …
Key factors influencing mechanical performance of dual phase steel resistance spot welds
M Pouranvari, SPH Marashi - Science and Technology of …, 2010 - journals.sagepub.com
… industry, in order to improve the fuel efficiency, occupant’s safety and reducing the car body
weight. Owing to the … kA; welding time, holding time and electrode force are 0?3 s, 0?1 s and …
weight. Owing to the … kA; welding time, holding time and electrode force are 0?3 s, 0?1 s and …
Influence of fusion zone size and failure mode on mechanical performance of dissimilar resistance spot welds of AISI 1008 low carbon steel and DP600 advanced …
… It is reported that the cooling rate during RSW changes from roughly 3000 C/s for 2.0 mm
thickness to over 10 5 C/s for thicknesses less than 0.5 mm [20]. These cooling rates are …
thickness to over 10 5 C/s for thicknesses less than 0.5 mm [20]. These cooling rates are …
Failure mode transition in AHSS resistance spot welds. Part II: Experimental investigation and model validation
The objective of this paper is to investigate and analyze the transition criteria from interfacial
to pullout failure mode in AHSS resistance spot welds during the tensile-shear test by the …
to pullout failure mode in AHSS resistance spot welds during the tensile-shear test by the …
Dependence of overload performance on weld attributes for resistance spot welded galvanized low carbon steel
… According to this model, cooling rate for 1.1 mm thickness is about 8000 K s −1 . Presence
of … For the investigated steel, the critical cooling rate is about 2375 K s −1 . Since the cooling …
of … For the investigated steel, the critical cooling rate is about 2375 K s −1 . Since the cooling …